Effect mechanism of multiple obstacles on non-Newtonian flow in ceramics 3D printing (linear elements)

Direct ink writing (DIW) provides a new way to mould ceramic parts. When a single screw extruder is used to extrude SiC slurry, the deposits caused by low viscosity and the agglomerations resulting from the nonuniform mixing, form the obstacles in the channel, which affect the normal flow of the slurry, theoretical outlet velocity, and interaction with other printing parameters. Therefore, it is necessary to study the mechanism responsible for the effects of the obstacles on the flow. The obstacles are always irregular, which makes it difficult to directly analyse them. Irregular geometries are always composed of linear and/or arcuate elements; therefore, the obstacles can be simplified into regular geometries. In the present work, linear elements are analysed first. Then, an improved MRT LBM (multiple relaxation time lattice Boltzmann method) with a pseudo external force is proposed for the flow analysis. The improved MRT LBM is combined with rheological test data to investigate cases with two obstacles, and the results are applied to reveal the general mechanism in cases with multiple obstacles. The results show that the angles, sizes, and positions of the obstacles are three important factors influencing the flow. To obtain a stable and controllable slurry flow, it is recommended that the first angle θ₁ be an acute angle. In addition, the number of obstacles should be minimized, and the position of the last obstacle should be far away from the outlet.     

DCNN深度特征与交替方向乘子的相关滤波跟踪

针对采用相关滤波的判别式目标跟踪遇到的瓶颈问题：由于目标快速移动引起边界效应，使得相关滤波器在学习与更新过程中可能会引入错误，最终错误的累积将导致跟踪失败。在采集深度学习特征与样本相似性度量的基础上，提出一种引入交替方向乘子方法的改进相关滤波目标跟踪算法，选择DCNN深度特征有效地表征待跟踪目标的初始状态，通过在线分类过程中样本相似性比对与半监督学习，辅助解决相关滤波器在学习过程中存在的自学习问题。所提目标跟踪算法特别适合训练样本为持续获得的、同时存储空间较小的机器学习过程，提高目标在快速运动与部分遮挡等复杂情况下的跟踪成功率，针对VOT2016标准测试视频的实验表明：当目标面临快速运动时，对比CN、SAMF、STC算法，所提DA-CFT跟踪算法将跟踪成功率分别由60.4%～73.4%、67.2%～82.9%、80.9%～88.1%提升至85.6%～91.0%。     

新型限力输出保护功能柔性夹钳的设计与参数评估

柔性夹钳因具有微/纳精密操作能力, 常应用于微操作系统中, 但因抓爪无法提供恒定输出力或恒力范围小, 容易造成操作对象的损伤或脱落。根据放大模块与常力模块串联的结构形式, 设计了一种具有常力特性的柔性夹钳。基于伪刚体法, 建立放大模块中桥式机构与杠杆机构的刚度和放大率数学模型, 通过对倾斜导向梁进行分析, 得到常力模块的力-位移关系式, 计算出恒定输出力为42.5 N, 输出范围为370 μm。最后, 结合不同柔顺梁的结构参数, 运用MATLAB仿真探究了各关键参数对常力特性的影响。研究结果可为常力柔性夹钳的构型设计和分析提供一定的理论支撑。     

新型实用的动态轨道衡过渡装置

本文通过对GDK-800型不断轨无基坑动态轨道称重装置故障成因的探究,提出对其装置的引轨、防爬和过渡部分,进行优化改造的建议,并简介一种新型实用的过渡装置。     

Reinforcing cycles involving inter- and intraorganizational paradoxical tensions when managing large construction projects

In recent years, scholars have shown a growing interest in combining control and flexibility when organizing and managing large construction projects, in contrast with the traditional focus on control. Prior research recognizes that there is a paradoxical tension between control and flexibility, meaning that, while both approaches make sense individually, they appear impossible to combine. Large construction projects are interorganizational, which means that tensions between interorganizational control/flexibility coexist with tensions between intraorganizational direction/empowerment, but the interplay and possible reinforcing cycles involving the two tensions have rarely been investigated in prior research. A multiple case study of four large construction projects with three rounds of interviews show how intraorganizational direction/empowerment can influence interorganizational control/flexibility and vice versa, and demonstrate both vicious and virtuous reinforcing cycles that involve the two types of tensions. Therefore, contributing to the project management and construction management literature, it is argued that employing a systemic approach when studying interorganizational projects is essential. A systemic paradox perspective can reveal interdependencies between tensions at different organizational interfaces, improve the understanding of how individuals in all managerial positions interplay, and explain how reinforcing cycles emerge and develop; this is important to recognize when organizing, staffing and managing large construction projects.     

W型铸铝水冷机座压铸新工艺

本文介绍了一种环保能源牵引电机及发电机定子机座的制造方法。通过压铸模具的设计,在内筒体上铸出W型水道和W型阴槽及焊缝保护法兰;在外筒体上铸出W型阳槽,内外筒体压力铸造;然后在压力状态下通过W型导向,对内外筒体进行预热压装;最后内外筒体进行组焊制成电机定子水冷机座。本工艺结构巧妙,工序简单,防漏水、窜水,结构可靠。     

超前预留缓冲区交替式相向采掘沿空送巷的应用研究

为了减少工作面推采产生的矿压对沿空送巷的影响,采用预留采掘头面之间的安全缓冲区和合理避开矿压应力区,预留缓冲区交替式相向采掘工艺,实现矿井沿空送巷高效安全生产。     

A CCD-ADI method for two-dimensional linear and nonlinear hyperbolic telegraph equations with variable coefficients

In this paper, a combined compact finite difference method (CCD) together with alternating direction implicit (ADI) scheme is developed for two-dimensional linear and nonlinear hyperbolic telegraph equations with variable coefficients. The proposed CCD-ADI method is second-order accurate in time variable and sixth-order accurate in space variable. For the linear hyperbolic equation, the CCD-ADI method is shown to be unconditionally stable by using the Von Neumann stability analysis. Numerical results for both linear and nonlinear hyperbolic equations are presented to illustrate the high accuracy of the proposed method.     

STL模型特征信息的自适应分层的研究

模型的分层是3D打印前处理的一个重要环节，针对目前分层算法效率低、不能有效保留模型细微特征的问题，提出了一种新的基于STL模型特征信息的思想。首先提取模型的特征边，对特征边内实体表面采用区域增长算法进行表面分割，然后对分割后的表面判断其类型，最后对于不同的表面类型采用不同的分层求交处理算法。利用VC++6.0平台和OpenGL显示技术，依据模型表面几何特征自适应地变动层厚，减小台阶效应，加快分层效率，同样能很好地保留模型局部特征，且该算法可以根据实际模型的成型方向，实现分层方向的改变，保证成型零件的精度。