鸡冠咀金矿废水污染预测及控制标准的探讨

本文以鸡冠咀金矿废水污染为例,论述了复杂水环境的预测模式选择和参数确定;并对水质标准进行了探讨;提出了鸡冠咀金矿废水排放的控制标准。     

一种可切削玻璃陶瓷的压痕断裂特性

将断裂韧性测试的压痕方法与压痕弯曲方法相结合，独立地分离出了压痕残余应力因子ｘ，使其成为可测参量，并建立了压痕一压痕弯曲的断裂韧性测试方法．将这种方法应用于一种可切削玻璃陶瓷的测试，获得的Ｋ１ｃ值为Ｋ１ｃ＝２．０３ＭＰａ·ｍ１／２，与单边切口法（ＳＥＮＢ）获得的Ｋ１ｃ值有较好的一致性．测得的残余应力因子Ｘ＝０．０９３，符合Ａｎｓｔｉｓ经验公式的预测．     

低乙烯含量抗冲聚丙烯的结构表征

采用二甲苯为溶剂，将不同乙烯含量（５％￣１５％质量）的抗冲聚丙烯用特定程序进行分级，将各样品分为室温下可溶于甲苯和不可溶于甲苯的两部分。使用＾１３Ｃ－ＮＭＲ方法和ＦＴ－ＩＲ方法对各组分进行表征，明确了乙烯链段在聚丙烯链上的分布，并在此基础上提出了产生这种链结构的聚合工艺的特点。     

Dynamic elastic-plastic buckling phenomena in a rod due to axial impact

Dynamic elastic-plastic buckling phenomena which might develop in a rod from an axial impact loading are studied in order to identify the conditions for quasi-static behaviour. A discrete model for dynamic elastic-plastic buckling, which retains the axial and the lateral inertia forces, is proposed, and the relationship between the model parameters and the characteristics of an actual structure is given. Examples of different external loadings and boundary conditions are considered in order to clarify the influence of elastic-plastic axial wave propagation on the buckling process. The critical time for the initiation of buckling is obtained and the post-buckling behaviour of the model is analysed. Particular attention is paid to the role of the striking mass on the characteristics of the buckling process and on the development of the buckling shape. The numerical study reveals that the inertia of the striking mass affects considerably the development of the buckling shape causing different patterns of axial strain distributions at the initiation of buckling. The comparisons which are made between the model predictions and some previously published experimental data show that the buckling process is governed by the impact velocity as well as by the external loading history provided by the experimental technique.     

实证分析:上市公司资本结构的影响因素

在国内外相关研究的基础上，利用我国资本市场的公开数据，对上市公司资本结构的影响因素进行实证研究，得出了若干重要结论。     

A study of impact toughness of Fe-Cr-X damping alloys

A study was carried out on the impact toughness of Fe- Cr- Х damping alloys. Two measures proved to be effective in improving impact toughness. One was to lower carbon plus nitrogen content to an ultra- low level. This method is suitable for single- phase ferrite alloy. The other is to use dual- phase damping alloys. The presence of martensite in Fe- Cr- Х alloys can enhance impact toughness remarkably, but lower damping capacity drastically. This shows the importance of achieving balance between mechanical prop-erties and damping capacity by properly controlling martensite volume fraction in dual- phase alloys.     

Experimental evaluation of the strength distribution of E-glass fibres at high strain rates

A bimodal Weibull distribution function was applied to analyse the strength distribution of glass fibre bundles under tensile impact. The simulation was performed using a one-dimensional damage constitutive model. The results show that there were two concurrent flaw populations in the fracture process. The regression analysis using the bimodal Weibull distribution function was in good agreement with experiment.     

管线钢管夏比冲击试验注意事项

结合管线钢管标准规范,分别从取样、试样加工、试验设备及试验过程等方面分析了管线钢管夏比冲击试验中可能出现的问题,并针对试验温度控制和操作过程提出了几点建议.