Electrical Resistance Measurement of Glass Transition and Crystallization Characteristics of Zr—Al—Cu—Ni Metallic Glasses

In this paper,glass transition and thermal stability of the Zr-Al-Cu-Ni metallic glasses were investigated by using electrical resistance measurement(ERM),DSC and X-ray diffraction techniques.The experimental results show that the ERM is capable of detecting the glass transition of the amorphous alloys and can help to distinguish the crystallization products of the Zr-Al-Cu-Ni metallic glasses owing to the difference of the electrical resistivity between the precipitation phases.     

初级金属固溶体的固相线

本文提出二元合金A_(1-x)B_x的初级金属固溶体的固相线的计算公式为:T_m(x)=T_(mA)F(x),其中T_(mA)是A金属的熔点,F(x)是以X为变量、包含A和B的原子密度N、价数Z、熔化体积增率(△V/V)和熔化熵△S的解析函数.对于以Cu、Ag、Au为基的、包含一价到四价的简单金属的24种初级金属固溶体的固相线作了理论计算.与实验结果符合较好.对于三元合金也作了相应的推广.     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

亚稳态金属材料抗空蚀性能研究

用旋转圆盘实验机研究了三种金属材料的空蚀。试验结果表明 :Fe -Mn -Si形状记忆合金、Fe -Cr-Ni-Mn不锈钢空蚀中分别诱发产生密排六方晶体结构的马氏体和体心立方晶体结构的马氏体 ,其抗空蚀性能依次为 0Cr13Ni5Mo不锈钢的 7.3倍和 2 .1倍。亚稳态金属材料抗空蚀性能与空蚀过程中动态相变对应力的响应密切相关。空蚀诱发马氏体相变不仅有利于改善材料抗空蚀性能 ,而且马氏体相变及其逆转变引起的能量耗散和伪弹性大大提高了Fe-Mn -Si铁基形状记忆合金的抗空蚀性能     

低碳钢热变形过程中铁素体的织构形成规律

利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。结果表明,在710℃纯铁素体热压缩过程中,形成〈100〉和〈111〉方向的线织构。〈111〉方向织构增强的速度较快,到应变为1.0时达最大值,然后随应变的加大而减弱;〈100〉方向织构在形变量较小时增强的速度较慢,在大应变时增强的速度很快。大应变时虽导致一定程度的动态再结晶,使铁素体晶粒细化,但组织不均匀,织构过强,造成强烈的各向异性。在奥氏体与铁素体两相区变形时,先共析铁素体因形变同样产生强烈的织构。随着形变温度的提高和先共析铁素体的减少,织构减弱。     

A Quantum Chemical Study on Hexanuclear Cluster Halides of Rare Earth Elements and Their Interstitial Compounds

The electronic structures of rare earth cluster halides R(R_6X_(12)) and their interstitial compounds R_7X_(12)Zwere studied by the DV-X_(?) method (R=Sc,Y,Pr,Gd or Er;X=Cl,Br or I;Z=B,C,N,Fe,Co or Ru).Theresults show that because f electrons in empty rare earth cluster are screened,their orbitals are more difficult tooverlap each other,a deficiency of skeleton orbitals in cluster causing the system to be unstable.They are easilycondensed into chain compound R_2X_3 or R_5X_8.If a light atom of main group is embedded into octahedralcluster,bonding orbitals formed from interstitial atom and rare earth cluster strengthen clusterskeleton bond in the system to reach structural stability.If embedded atom belongs to transition metal,bondingorbitals composed of that of interstitial atom and rare earth cluster take the place of original cluster skeletonorbitals to form heteronuclear metal cluster (or double-coordination compound).     

On the mechanical behavior of aluminum alloys reinforced by long or short alumina fibers or SiC whiskers

This study was initiated to examine the dispersion of longitudinal and transverse waves in metal matrix composites in order to obtain the dynamic elastic modulus and to evaluate various models for predicting the composite's macroscopic elastic constants from the properties of its constituents. The materials chosen for this investigation were alumina continuous fibers on the one hand and alumina and SiC short fibers on the other hand, all embedded in an aluminum alloy matrix. In addition, some indications have been obtained experimentally for the acoustoelastic effect in the composite.     

高温稀土永磁Sm2(Co,Cu,Fe,Zr)17 的制备和性能

制备了高温稀土永磁材料Sm(Coba1Fe0．26Cu0．05Zr0．026)7．0，研究了磁性能与工艺条件的关系．结果表明：提高烧结温度可使材料的Br和(BH)max增大，但是使Hci降低；适当提高真空预烧温度，可使材料在较低烧结温度下致密化，具有较高的Hci和(BH)max和温度稳定性．真空预烧温度过高使性能的急剧降低，其主要原因是Sm的析出．在最佳工艺条件下材料的磁性能参数分别为：Br1．08T3Hci2286kA／m，Hcb932kA／m，(BH)max220．8kJ／m^3；β20-200℃为-0．19％／℃．     

中高温熔点金属材料固–液相变点导热系数测量

设计了一种中、高温熔点金属材料固-液相变点温度附近热物性动态测算方法,并与计算机实时数据采集和测控技术结合起来,研制了相应的动态测试仪。通过实验测定相界面的移动速率与相变导热反问题的数值计算相结合的办法来确定被测材料的热物性。分别对相变室、炉体、相界面探测器、温度在线检测与控制系统、测试过程进行了设计,对测试系统的测量误差进行了定量分析,发现采用此方法测试的系统误差不超过3%。用已知热物性的锌、铝金属对此方法进行了检定,得到了较为满意的测试结果。