铰接顶梁接头模具的热处理

叙述了热锻模的工作条件及材料分析 ,对铰接顶梁接头模具的热处理工艺作了探讨。     

新型模具钢012Al在深冷处理过程中的组织转变

本文利用x-射线衍射分析及复型和薄膜透射技术研究了012Al钢经淬火后在深冷处理过程中的组织转变。结果表明,淬火后的残余奥氏体在深冷处理过程中部分转变成马氏体;深冷处理使马氏体发生分解,析出超细碳化物;同时伴有形变晶孪产生。     

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.     

多资源公平调度器在Hadoop 中的实现

目前Hadoop的作业调度算法都是将系统中的多类资源抽象成单一资源,分配给作业的资源均是节点资源中固定大小的一部分,称为插槽。这类基于插槽的算法没有考虑到系统多资源的差异性,忽略了不同类型作业对资源的不同需求,因此导致系统在吞吐量和平均作业完成时间上性能低下。本文研究了多资源环境下公平调度算法在Hadoop中的实现,设计了一种多资源公平调度器MFS(Multi-resource Fair Scheduler)。MFS采用了DRF(Dominant Resource Fairness)调度思想,使用需求向量来描述作业对各类资源的需求,并按照需求向量中各资源的大小给作业分配资源。MFS能更加充分有效地使用系统的各类资源,并能满足不同类型作业对资源的不同需求。实验表明相比于基于插槽的Fair Scheduler与Capacity Scheduler,MFS提高了系统的吞吐量,降低了平均作业完成时间。     

面向Internet的模具知识本体的构建研究

通过对Internet上模具知识特点的分析,提出通过修改模具论坛的发贴模板的方法来获取论坛贴子的标签,然后利用"七步法"构建Internet上模具知识本体,并初步提出语义搜索概念模型,为基于Internet模具知识的搜索引擎的实现提供理论和实践基础。     

Multilayered substrate integrated waveguide 4 × 4 butler matrix

In this article, a multilayered substrate integrated waveguide (SIW) Butler matrix beam‐forming network is proposed, designed, and demonstrated at 24 GHz for automotive radar system applications. The proposed low‐cost SIW structure can be used to develop a highly integrated multibeam antenna platform in automotive radar systems and other applications. In this structure, an SIW H‐plane coupler is optimized with an H‐plane slit to provide the required phase shift. A class of SIW E‐plane 3‐dB couplers in doubled layer substrate are studied and designed as the fundamental building blocks to avoid crossovers usually required in the construction of a Butler matrix. A 4 × 4 matrix is investigated and designed, which shows excellent performance over 22–26 GHz frequency band. Two types of antenna are tested with the proposed matrix scheme. First, an antipodal linearly tapered slot antenna (ALTSA) is incorporated into the Butler matrix to verify the broadband performances. Second, a longitudinal slotted waveguide antenna array is examined to generate radiation patterns in the broadside direction. Measured results agree well with simulated counterparts, thus validating the proposed multilayer SIW design concepts. In the next sections, the use as feeding networks for providing the reconfigurability operation of an antenna will be illustrated. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2012.     

接灯片级进模设计

分析了接灯片冲压工艺和采用级进模生产的可行性 ,介绍了排样设计、模具结构特点及其工作过程     

双色挤塑成型

以彩色毛笔杆为例 ,分析了双色挤塑成型的基本原理 ,介绍了设计制造双色挤塑成型简易设备的方法。     

3Cr2MnNiMo钢大型模块的预硬化处理

本文试验研究了八种淬火冷却方式和四种回火工艺对3Cr2MnNiMo钢预硬化处理后的硬度的影响，在所得的试验数据的基础上，分析估计了3Cr2MnNiMo钢大模块硬化后的表心硬度差，该差值与工业生产结果大致相吻合。     

铝合金局部加压凝固及流动数值模拟的研究

局部加压方法是压铸中用于消除铸件厚壁处缩孔缺陷的一种新工艺.本研究通过实验模型测量了不同加压条件下铸件的冷却曲线,分析了局部加压引起的凝固变化.考虑局部加压引起的补缩流动,通过适时修改网格文件、初始和边界条件的方法,模拟了局部加压过程中铝合金的凝固及流动变化,并与实验结果进行了对比,二者基本吻合.