Study on combustion characteristics of blended coals

Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NO _x but there is no obvious rule. SO _x emission can be reduced by blending low sulfur coal. Translated from Proceedings of the CSEE, 2005, 25(18): 97–103 [译自: 中国电机工程学报]     

Predictors of outcome in LAAM, buprenorphine, and methadone treatment for opioid dependence.

This study examined (1) predictors of treatment outcome for opioid-dependent participants in a single-site controlled trial comparing methadone, buprenorphine, and LAAM treatments and (2) the extent to which various subpopulations of patients may have more successful outcomes with each medication. The relationships between patient demographics, drug use history, and psychological status and outcome measures of treatment retention, opiate use, and cocaine use were assessed. We believe this study to be the first to demonstrate that predictors of treatment success appear to be largely similar in LAAM, buprenorphine, and methadone treatment for opioid dependence. We did not find any factors that would strongly guide selection of one medication over others. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

连续蒸煮器内洗涤结合器外扩散洗涤的应用

连续蒸煮器内洗涤结合器外扩散洗涤，具有洗涤时间长、洗涤效率高、提取黑液浓度高、浆层厚度均匀、浆层结构组织和浓度一致等特点，运行可靠，易于自动化控制，实现了洗涤用水的封闭循环。     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

胶凝砂砾石坝材料特性研究及工程应用

本文阐述了胶凝砂砾石坝的起源和发展情况。根据福建街面水电站下游围堰的施工要求，即施工期作为挡水堰，运行期作为量水堰，设计了围堰坝体的断面，对堰体的应力、稳定和渗流进行了分析，提出了材料的性能参数要求，并探讨了胶凝砂砾石材料的渗透溶蚀性能。研究结果表明，采用当地天然砂砾石，掺入水泥和粉煤灰各40kg/m3，其180d龄期抗压强度等级可达到C7.5，并满足围堰的力学、稳定、防渗和抗溶蚀要求，缩短了工期，降低了造价。     

唐山建龙900mm冷轧机组的工艺与设备

较系统地介绍了我国第1条国产化的中宽带钢冷连轧生产线，即唐山建龙钢铁控股有限公司900mm冷连轧生产线的工艺流程、主要设备组成及技术特点。重点介绍了900mm 4机架六辊轧机的技术参数、性能特点及自动控制系统。该生产线投产以来，取得了较好效果。     

Influence of Ti Powder Characteristics on Combustion Synthesis of Porous NiTi Alloy

Porous NiTi shape memory alloy (SMA) is a novel biomedical material used for human hard tissue implant .The influence of elemental titanium powder characteristics such as powder morphology, particle size and specific surface area( SSA) on the minimal ignition temperature ,combustion temperature and final product of porous Ni-Ti SMA fabricated by combustion synthesis method was investigated in this paper by scanning electron microscopy (SEM) and laser diffraction.The preliminary data indicated that the titanium powder characteristics had a strong effect on combustion synthesis of porous NiTi SMA.     

电加热柔性连续抽油杆动态特性的计算机模拟

根据电加热柔性连续抽油杆的特性、参数及井下基本工况,建立了三级混合抽油杆柱的有限元模型。运用有限元软件对混合杆柱的动态特性进行计算机模拟,得到各关键点位移、速度随时间变化曲线,以及计算机模拟的地面示功图,为抽油机、抽油杆设计和井下故障诊断提供理论依据。与传统电加热空心抽油杆相比,电加热柔性连续抽油杆在降载和节能方面优势显著。     

安徽省长江干堤的几种加固措施

安徽省境内765km的长江干堤，由于均是在原来旧堤的基础上经逐年加高培厚的，修筑时均未按设计要求施工，致使堤身密实度不够，新老堤土之间结合不牢，在汛期高水位时易产生渗漏。20世纪70年代以来，安徽省高度重视对长江干堤渗漏隐患的处理，经过长期的实践，逐渐摸索出一套行之有效的除险加固方法，如锥探灌浆、灭杀白蚁、冲抓套吉、垂直铺塑防渗、粘土铺盖及压渗盖重等处理措施。使长江干堤的渗漏隐患得以基本消除，其具体作法可供类似工程借鉴。     

导电聚苯胺在微波场中的升温特性

本文研究了微波辐照下导电聚苯胺的升温特性。研究表明 ,导电聚苯胺在微波场中具有快速升温的特点 ,升温速度与掺杂剂的种类、掺杂酸的浓度、聚苯胺的导电率、合成聚苯胺的温度等因素有关。盐酸掺杂聚苯胺热稳定性较差 ,在微波场中不能反复升温 ,而热稳定性较好的DBSA掺杂的聚苯胺具有一定的反复升温能力