微桥法镍膜的弹性模量和残余应力测量

利用MEMS技术制作了不同尺寸的镍(Ni)膜微桥结构样品。采用纳米压痕仪XP系统测量了微桥载荷与位移的关系,并结合微桥力学理论模型得到了两种不同尺寸的Ni膜的弹性模量和残余应力。结果表明,两种不同尺寸的Ni膜的弹性模量结果一致,为190 GPa左右,但是残余应力变化较大。与采用纳米压痕仪直接测得的带有硅(Si)基底的Ni膜弹性模量186.8 7.5 GPa相比较,两者符合较好。     

Gamma-irradiation-induced Ag/SiO2 composite films and their optical absorption properties

Small Ag particles or clusters dispersed mesoporous SiO₂ composite films were prepared by a new method: First the matrix SiO₂ films were prepared by sol-gel process combined with the dip-coating technique, then they were soaked in AgNO₃ solutions followed by irradiation of γ-ray at room temperature and in ambient pressure. The structures of these films were examined by X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), and optical absorption spectroscopy. It has been shown that the Ag particles grown within the porous SiO₂ films are very small, and they are isolated and dispersed from each other with very narrow size distributions. With increasing the soaking concentration and an additional annealing, an opposite peakshift effect of the surface plasmon resonance (SPR) was observed in the optical absorption measurements.     

掺Er Al2O3光波导薄膜材料的制备及光学特性

介绍了掺ErAl2O3光波导薄膜的四种典型制备方法的研究结果。比较铒的发光环境和发光特性,分析了影响光致发光强度和寿命的条件和因素。不同工艺制得的Er∶Al2O3薄膜,膜内成分、膜的晶相、掺杂浓度等对Er3 的发光特性均有影响。退火对发光特性及材料具有改善作用。     

流量比对等离子体基团分布和薄膜结构的影响

使用光强标定的发射光谱(AOES)测量了CHF3／C6H6混合气体的微波电子回旋共振(ECR)放电等离子体中基团的分布状态。实验发现随着CHF3流量的增加，成膜基团CF、CF2、CH等的相对密度增大，而刻蚀基团F的密度也会增加，从而使得a—C：F薄膜的沉积速率降低。同时红外吸收谱(IR)分析表明，在高CHF3流量下沉积的a—C：F薄膜中含有更高的C—F键成分。可见在a—C：F薄膜的制备中CHF3／(CHF3 C6H6)流量比是重要的控制参量。     

铝薄膜CMP影响因素分析

提出了在碱性抛光液中铝薄膜化学机械抛光的机理模型,对抛光液的pH值、磨料、氧化剂浓度对过程参数的影响做了一些试验分析。试验结果表面粗糙度的铝薄膜所需的最优化CMP过程参数:硅溶胶粒径为15～20nm,pH值为10.8～11.2,氧化剂浓度为2.5%～3%。     

BaxSr（1—x）TiO3多层膜椭偏光谱研究

用溶胶－凝胶技术在Bi(100）衬底上制备了单层和渐变型多层的BaxSr(1-X)TiO3薄膜，其膜层组分分别为：Ba0.7Sr0.3TiO3,Ba0.8Sr0.2TiO,Ba0.9Sr0.1TiO3,BaTiO3，对生长制备出的多层BaxSr(1-X)TiO3薄膜进行了变角度椭偏光谱测量，通过椭偏光谱解谱分析研究，首次得到了BaxSr(1-X)TiO3多层膜结构不同膜层的膜厚和光学常数，其结果显示：椭偏光谱分析得到的不同膜层的膜厚与卢瑟福背向散射测量得到的结果基本相符；渐变型多层膜中BaTiO3薄膜的折射率比单层BaTiO3薄膜折射率大许多，与体BaTiO3的折射率相接近，这说明渐变型多层膜中BaTiO3薄膜的光学性质与体材料的光学性质接近。     

Simulations of Temperature Field in HFCVD Diamond Films over Large Area

A three-dimensional model was developed to investigate the influence of various hot filaments parameters on substrate temperature fields that significantly affect the nucleation and growth of diamond films over large area by hot-filament chemical vapordeposition (HFCVD). Numerical simulated results indicated that substrate temperature varies as a function of hot filamentsnumber, radius, temperature, emissivity, the distance between filaments, and the distance between substrate and filamentsarrangement plane. When these filaments parameters were maintained at the optimal values, the homogeneous substrate temperature region of 76 mm×76 mm with the temperature fluctuation no more than 5% could be obtained by a 80 mm×80 mmhot filaments arrangement plane. Furthermore, the homogeneous region could be enlarged to 100 mm×100 mm under thecondition of supplementary hot filaments with appropriate parameters. All of these calculations provided the basis for speciallyoptimizing the hot filaments parameters to dep     

二氧化锡溅射工艺研究

SnO2 是最早使用也是目前使用最广泛的一种气敏材料 ,使用该材料设计制作的气敏传感器具有许多优点。在简要介绍溅射镀膜的成膜过程和特点的基础上 ,着重介绍了SnO2 膜的制备流程 ,分析了功率和温度变化对成膜质量的影响     

聚氨酯胶粘剂在苯板夹心板生产中的应用

简要介绍了聚氨酯胶粘剂在彩钢板／聚苯乙烯夹心板生产中的应用、采用双组分无溶剂发泡型聚氨酯胶粘剂生产夹心板的工艺。对胶粘剂配制中原料的选择和工艺参数的确定进行了讨论。采用由聚醚、水、催化剂等配成的混合物为A组分，多异氰酸酯作为B组分，制成的发泡型聚氨酯胶粘剂具有固化速度快、成本低、实用效果好等优点，滴胶和抹胶的施工方法工艺简单，可满足夹心板生产的需要。