Ability of a contactless inductive device for the characterization of the critical current versus temperature in superconducting rings at temperatures close to TC

Critical current measurements for three polycrystalline rings of YBCO, three Bi-2223, and one YBCO + Ag were developed from a temperature close to 80 K to the critical temperature using a previously reported contactless inductive device based on the transformer method. These data were used to analyze the ability of this device to characterize, in superconducting rings, the Ginzburg-Landau, Ambegaokar-Baratoff, and De Gennes regimes as well as the crossover temperature between them.     

Schwingfestigkeit von Schraube‐Mutter‐Verbindungen

High cycle fatigue of bolted connections Extensive tests regarding the influences on the fatigue of bolt‐nut‐connections of preloading with torsion, of preloading with yielding, of loading with superimposed bending and of the tested lot are processed. These influences are not yet known according to VDI 2230. New testing devices were designed for these tests, which allow a far less expensive operation and may easily be used for bolts of diameters up to M100 and testing frequencies up to 1000 Hz. The validity of fatigue resistance according to VDI 2230 is specified with respect to the test results. The determined influence of the tested lots is unexpectedly high. The manufacturing process of bolts should be improved to minimize this influence.     

Development of the Embedded Protective Device Based on ARM

An embedded protective device for 35kV power line is worked out based on Philips＇ LPC2292 ARM MCU. Several aspects such as embedded design technique adopted in the system framework, application of adaptive theory in data acquisition, Board Support Packet （BSP） developing and task dispatching related to operating system are discussed. Both hardware and software framework of the system are given. Advanced hardware platform and software development environment is applied in design of the system, with the advanced co-design technology.     

用VISUAL FOXPRO设计专业产品数据库

根据专业产品数据库的特点和安全性要求提出了基本设计思想，包括根据用户权限进行检索，建立了Ａ，Ｂ库，形成不同视图以满足不同用户需求。     

超滤装置自动控制系统的研制

本文介绍了一种用于纯水制备的超滤装置的自动控制系统，该系统在设备在日常操作，超滤膜的清洗等方面不仅大大减少工作强度，提高了工作效率，而且延长了超滤器件的使用寿命，取得较好的经济效益。     

复合栅控二极管新技术提取热载流子诱生的NMOS/SOI器件界面陷阱的横向分布

提出了用复合栅控二极管新技术提取MOS/SOI器件界面陷阱沿沟道横向分布的原理,给出了具体的测试步骤和方法.在此基础上,对具有体接触的NMOS/SOI器件进行了具体的测试和分析,给出了不同的累积应力时间下的界面陷阱沿沟道方向的横向分布.结果表明:随累积应力时间的增加,不仅漏端边界的界面陷阱峰值上升,而且沿沟道方向,界面陷阱从漏端不断向源端增生.     

通用串行总线(USB)数据传输模型

USB作为一种数据传输接口，了解它的通信传输机制是正确利用USB利用数据传输的基础，分层次结构对USB数据传输模型加以分析，可以使读者建立起USB体系结构、通信模型和总线事务的框架和概念，并最终对USB传输工作流程有一个清晰的认识。     

塑料薄膜透气测试装置及测试方法研究

根据塑料薄膜透气原理，设计了一种简易薄膜透气测试装置，并对测试方法及结果处理进行了探讨。     

电动自行车充电器自动检测系统设计

介绍了基于PC虚拟仪器和VB环境的电动自行车充电器自动检测系统，阐述了系统检测原理，硬件结构设计及应用软件的编制方法，文中还给出了一个实用的恒流放电电子负载电路。     

一种无线电引信杆试验升降装置

针对目前广泛使用的无线电引信杆试验升降装置的不足，提供一种先进、简单、实用的升降装置，此装置主要由一体化减速、制动电机和控制电路组成，具有体积小、可靠性高、成本低廉等优点，是解决无线电引信杆试验测试弹升降问题的较好方案。