T-ZnO晶须增强环氧树脂复合材料的力学行为

研究了以四脚状氧化锌（T-ZnO）晶须为增强剂，环氧树脂复合材料的力学行为。结果表明，由具有三维空间结构的T-ZnO晶须为增强剂所制备的环氧树脂复合材料具有各向同性的力学性能，T-ZnO晶须填加质量分数为6%时，就可使材料的力学性能改善；拉伸强度提高到169%，拉伸功几乎提高了100%，冲击强度提高到300%，抗弯的断裂功提高到158%，而压缩强度略有下降。     

Mechanical properties of polyethylene mixtures crystallized under high pressure

The mechanical properties of a medium molecular weight polyethylene (MMW‐PE) and an ultrahigh molecular weight PE (UHMW‐PE) binary mixture with different weight fractions crystallized from the melt at 0.1 and 450 MPa were studied. The tensile modulus, yield stress, and strain were obtained as a function of the weight fractions in the PE mixtures at 25 and 85°C. The tensile modulus in the sample crystallized at 0.1 MPa decreased from 1.5 GPa of pure MMW‐PE to about 0.4 GPa of pure UHMW‐PE with the UHMW‐PE content but it did not decrease with the UHMW‐PE in the sample crystallized at 450 MPa in testing at 25°C. A decreasing rate of the storage modulus E′ of UHMW‐PE in a dynamic measurement for the sample crystallized at 0.1 MPa with the temperature is larger than that of the sample crystallized at 450 MPa. These experimental facts are interpreted in relation to the molecular motion and crystallinity of the sample. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1962–1968, 2003     

可控式机械密封设计

从机械密封的工作原理和失效分析入手,将自动控制技术引入机械密封,以改进机械密封的性能,使机械密封装置能够主动适应操作条件和工作环境的变化,提高其工作的可靠性和使用寿命,适用于要求较高的流体机械的轴端密封。     

洪家渡水电站工程高边坡综述

乌江洪家渡水电站坝址河谷深切300余m,硬质岩与软质岩相间分布,岸坡地形陡峻,软弱夹层发育,卸荷、崩塌等物理地质作用强烈。根据坝址地质条件与电站枢纽布置,工程存在:隧洞群进水口同向高边坡整体稳定问题;坝肩开挖、隧洞进出口开挖、厂房开挖及料场开挖等高边坡稳定问题;泄洪冲刷及雾化区1号、2号塌滑体高边坡稳定问题;王家渡堆料场、瓦房寨砂石系统高边坡稳定问题。因此,工程高边坡稳定问题是本工程的主要工程问题之一,但通过参建各方共同努力,本工程高边坡处理都取得了圆满成功。     

Quality of Service in VoIP Communication

The focus of this paper lies in the practical aspects of voice over IP communication. VoIP configurations in the H.323 standard will be presented briefly. Following that, the fundamental protocol procedure of H.323 communication will be briefly explained. A further part of the paper will address the subject QoS (quality of service), and present the common measurement methods used in QoS. Results gained from experiments conducted in a VoIP environment will then follow. The investigations concentrate primarily on the load behavior of voice packets in relation to important parameters of this service. The results obtained are presented and evaluated in diagrams. The paper concludes with a summary.     

机械合金化Fe-Ni粉末的相结构

使用XRD和Moessbauer等方法，研究了在Ar气氛下机械合金化Fe—Ni粉末相结构的变化．结果表明，在机械合金化Fe64-Ni36粉末过程中，fcc相的数量随着球磨时间的增加先增加然后减少，与加乙醇球磨Fe64-Ni36的情形相同．当Ni的含量(原子分数)大于50％时，有fcc相、顺磁相和FeNi3形成，当Ni的含量低于50％时，bcc相的数量随着Ni含量减少而增加．Moessbauer谱的结果表明，因球磨时间或Fe、Ni比例的不同，Fe—Ni球磨粉末固溶体具有不同结构的原子配比。     

CLBO晶体化学机械抛光技术的研究

介绍了硼酸锂铯(CLBO)晶体的应用前景及在化学机械抛光过程中存在的问题,简要分析了晶体在常温下开裂的机理,选用无水溶剂对晶体进行化学机械抛光以防止加工过程中晶体的潮解开裂。分析了抛光液、压力、温度、pH值参数对抛光过程的影响,通过合适配比使速率可达1.5～2μm/min,且表面质量较好。     

Requirements engineering in health care: the example of chemotherapy planning in paediatric oncology

Health care is characterized by highly complex processes of patient care that require unusual amount of communication between different health care professionals of different institutions. Sub-optimal processes can significantly impact on the patient’s health, increase the consumption of services and resources and in severe cases can lead to the patient death. For these reasons, requirements engineering for the development of information technology in health care is a complex process as well: without constant and rigorous evaluation, the impact of new systems on the quality of care is unknown and it is possible that badly designed systems significantly harm patients. To overcome these limitations, we present and discuss an approach to requirements engineering that we applied for the development of applications for chemotherapy planning in paediatric oncology. Chemotherapy planning in paediatric oncology is complex and time-consuming and errors must be avoided by all means. In the multi-hospital/multi-trial-centre environment of paediatric oncology, it is especially difficult and time-consuming to analyse requirements. Our approach combines a grounded theory approach with evolutionary prototyping based on the constant development and refinement of a generic domain model, in this case a domain model for chemotherapy planning in paediatric oncology. The prototypes were introduced in medical centres and final results show that the developed generic domain model is adequate.     

多臂井径成像测井技术

多臂井径成像测井技术同以往的40臂、X—Y井径等非成像工程测井相比具有较为明显的优势，不但可以做定量解释提供最大、最小、平均井径值，而且可以提供更为直观的18条或36务独立的测井曲线、磁井径，磁重量、井温、井壁立体图、井壁成像图、井壁截面图，为检测井下套管的完好性及修复提供了更为可靠直观的资料，满足了地质学家及时监测套管状况的要求，也为油井作业、大修提供全面、准确的套管全貌。文章介绍了18臂、36臂两种井径成像测井技术。并通过对测试资料实例的解释、分析、研究，总结了多臂井径成像测井技术的特点及应用效果。     

A stochastic model for localized disturbances and its applications

A stochastic model for local disturbances, particularly for a temporal harmonic with random modulations in amplitude and/or phase, is proposed in this paper. Results for the second moment responses of a linear single-degree-of-freedom system to this type of stochastic loading demonstrate a significant change in response characteristics due to a small uncertainty. A local phenomenon may last much longer and resonance may be smeared to a broad range. Integrated with wavelet transform, the proposed approach may be used to model a random process with non-stationary frequency content. Especially, it can be effectively used for Monte Carlo simulation to generate large size of samples that have similar characteristics in time and frequency domains as a pre-selected mother sample has. The technique has a great potential for the case where uncertainty study is warranted but the available samples are limited.