一种蓝色电泳液微胶囊的制备与表征

采用十八胺对酞青蓝BGs进行化学修饰,以Span-80为稳定剂,四氯乙烯为分散介质,制备了分散性和稳定性良好的电泳显示液.用该电泳液作囊芯,以尿素和甲醛进行界面反应形成囊壁,制备了蓝色电子墨水微胶囊,讨论了搅拌速度、酸化时间和固化条件等对微胶囊形貌与物理性质的影响.所制备微胶囊呈规则球形,表面光滑,囊壁结构致密,平均粒径为100 μm,包覆率达89%.采用红外光谱、光学显微镜和电泳实验等方法,研究微胶囊结构及电场响应,蓝色电泳液微胶囊在电场作用下具有明显可逆移动响应.     

电路模拟中非线性方程的周期波形响应

用范数估计方法对非线性高阶微分方程的周期边值问题进行了讨论,通过对非线性二阶微分方程周期边值问题的详细讨论,给出了系统函数对某些变量偏导数的某种范数小于1时,非线性二阶微分方程的波形松弛算法产生的迭代序列收敛到该方程的周期解.用类似的方法给出了非线性高阶微分方程的波形松弛算法产生的迭代序列收敛到该方程周期解的充分性条件.     

数控超声磨削陶瓷叶片型面刀位轨迹计算

介绍了陶瓷超声磨削加工现状,建立了平行直纹面数学模型.分析了用圆柱磨轮四轴数控超声磨削平行直纹面时原理误差,并提出减小误差的措施,计算出磨轮空间轨迹,并进行陶瓷叶片型面超声磨削加工工艺试验.试验结果表明,超声磨削加工陶瓷叶片型面是可行的,所完成的刀位计算可有效减小原理误差.     

水平地震作用下巨-子型有控结构的动力响应研究

针对巨-子型有控结构存在的因子结构加速度过大及位移过大可能会造成主、子结构碰撞的问题,本文设置了一种实际的粘滞阻尼器,分析水平地震作用下其对巨-子型有控结构动力响应的控制效果,通过改变粘滞阻尼器的安装位置,进一步讨论了粘滞阻尼器安装位置对其控制效果的影响,研究表明：粘滞阻尼器的设置不会影响子结构的调频作用,且能改善巨-子型有控结构的控制效果,减小主结构位移、子结构加速度响应,其在结构中的安装位置对控制效果影响显著。     

基于PLC的内壁自动喷涂机控制系统设计

设计了一种适合于圆形内表面喷涂的数控喷涂机的控制系统,采用PLC可编程序控制实现了对喷涂电流、电压、涂层温度等工艺参数实时监测和控制。该控制系统具有结构紧凑、运动灵活、占用空间少、工作可靠、节能、装卸料容易等优点,适用于小型圆形工件内壁喷涂生产。     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

Set methods of left-turn waiting zone at signalized intersection

To maximize the number of vehicles passing by the stop-line in a cycle and improve the operation efficiency of intersection in China,the settlement of left-turn lane waiting-zone is becoming prevailing. Based on conflicting-point method,the internal mechanism of left-turn flow after stopping line was analyzed through taking postposition left-turn lane waiting-zone intersection for instance. The relationship between the first left-turn vehicle and the last vehicle of previous phase passing the conflicting point was expounded. According to the time of successive arriving of two vehicle flows at conflicting-point,the reasonable layout for waiting area of left-turn vehicles was researched when the clearance index was less than 0. The results suggest that the appropriate layout for waiting area of left-turning vehicles can improve the operation efficiency of intersections.     

Influence of surface finish and annealing treatment on oxidation behavior of Ti-48Al-8Cr-2Ag alloy

The effect of surface finish and annealing treatment on the oxidation behavior of Ti-48Al-8Cr-2Ag (molar fraction, %) alloy was investigated at 900 and 1 000 °C, respectively in air. Thermal gravimetric analysis (TGA) was conducted for the characterization of oxidation kinetics. The microstructures of oxide scales were studied by scanning electron microscopy (SEM) and transmission election microscopy (TEM) techniques. Unfavorable effect of the annealing treatment on the oxidation behavior of the coating was also investigated. The results indicate that the oxidation behavior of the alloy is influenced by surface finish and annealing treatment. The oxidation rate of ground sample is lower than that of the polished alloy at 1 000 °C in air. The former forms a scale of merely Al₂O₃, and the latter forms a scale of the mixture of Al₂O₃ and TiO₂. Annealing can improve the formation of TiO₂. Foundation item: Project(2007430028) supported by the Science and Technique Foundation of Henan Educational Committee, China     

Relation between structural evolution of the Longmenshan orogenic zone and sedimentation of its foreland basin

In order to determine the area for oil and gas exploration in China's north Sichuan basin, we have divided the time during which the Longmenshan foreland basin was formed into five periods, based on the sedimentary response relationship of the fore-land basin to structural evolution: 1) a late Triassic Noric period; 2) an early-Middle Jurassic period; 3) a late Jurassic to early Cre-taceous period; 4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well, we analyzed the sedimen-tary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area, making it a major region for future oil and gas exploration in China's northern Sichuan basin.     

响应曲面法优化甘薯饮料配方的研究

以甘薯为实验材料,以甘薯浓缩汁、蔗糖、柠檬酸和甘薯香精为实验因素,利用响应曲面法进行实验设计,对甘薯饮料的最佳配方进行了研究,并对最佳配方进行了感官评价验证、理化指标检测和微生物学检测.通过对实验得到的回归方程和响应曲面分析得出甘薯饮料的最佳组合为100 mL饮料中甘薯浓缩汁1.28 mL,柠檬酸0.1 g,蔗糖5.41 g,甘薯香精2.84mL,感官评分为83.43.