化工生产中的“界面”现象对工艺设备的影响

分析了化工生产过程设备、管道中存在的各种“界面”现象及其影响，并提出相应对策。     

串行接口LED数码管及键盘管理器件ZLG7289A的原理与应用

介绍了LED数码管及键盘管理器ZLG7289A的原理与应用。该芯片具有SPI串行接口，可同时驱动8位共阴式数码管(或64只独立LED)，还可连接多达64键的键盘矩阵，单块芯片即可完成LED显示、键盘接口等全部功能。文章给出了ZLG7289A的特点、引脚功能、指令说明和经典电路．并以单片机AT89C51为例，给出了其接口电路及相应源程序。     

NiCuZn铁氧体和银内电极的共烧行为

NiCuZn铁氧体正作为磁介质广泛地应用于低烧多层片式电感，因此有必要对其与银内电极的共烧行为进行研究。该文主要介绍NiCuZn铁氧体／银内电极多层复合体共烧过程中的烧结收缩、界面反应、扩散对介质性能的影响。尖晶石结构中存在相当数量的空位，这为银离子提供了一定的溶解度，因此在共烧过程中银对铁氧体的相组成影响较小。银对铁氧体性能的影响体现在两个方面。一方面是由于银具有相对低的烧结温度，从而在烧结过程中起到助烧剂的作用，促进致密化过程，提高烧结体的密度和磁导率；另一方面，银促使铁氧体中的铜在晶界处析出，导致晶界处应力，使磁导率降低，晶粒生长也被一定程度地抑制。     

复合微粒高性能混凝土的二级界面显微结构及耐久性研究

将天然纳米纤维材料及活性球形掺合料复合应用于高性能混凝土中,用以改善高性能混凝土的二级界面,探讨胶凝材料的颗粒紧密堆积及显微结构。对混凝土力学性能的研究表明:改善混凝土的二级界面,可以大幅度提高其抗弯强度和弹性模量;对耐久性的研究表明,由于加入了纳米纤维材料,改善了体系颗粒级配及二级界面显微结构,增加了体系密实度,是提高混凝土抗冻性、抗渗性的有效途径。因而,研究高性能混凝土的二级界面显微结构,对于提高高性能混凝土的宏观物理力学性能及耐久性存在巨大潜能。     

TMS320F240串口通信特征及其应用

主要论述了TMS320F240串行外设接口模块的特点，并通过与MCS5l单片机通信，实现液晶显示。     

通用USB接口设备控制器的研究

简要介绍了USB技术的发展与现状；详细论述了USB系统的硬件结构；深入研究了USB系统的特点；探讨了USB系统目前仍在的问题。     

NCFW专家系统的汉语接口

NCFW系统是适合于花岗岩与变质岩地区的勘探地下水专家系统，系统的人机交互既可用菜单（亦称项目单）方式，亦可用汉语对话方式。这两种方式既可混合使用亦能灵活切换。本文着重描述了汉语接口的设计思想、实现中采用关键技术以及系统运行实例。     

Oscillatory crack tip triangular elements for finite element analysis of interface cracks

In this paper a special crack tip element has been developed in which displacements and stresses have the same behaviour as those of bi‐material interface cracks with open tips. The element degenerates into a traditional triangular quarter point element in cases of homogeneous cracks. An isoparametric co‐ordinate system (ρ, t) is defined in this study, and numerical techniques using these co‐ordinates to evaluate Jacobian matrices, shape function derivatives, and element stiffness matrices are developed. Also, equations calculating the complex stress intensity factor using displacements are obtained in this study. Numerical results are in good agreement with known analytical solutions in two examples. Copyright © 2003 John Wiley & Sons, Ltd.     

A new curvature technique calculation for surface tension contribution in PLIC-VOF method

The volume of fluid (VOF) methods have been used for numerous numerical simulations. Among these techniques used to define the moving interface, the piecewise linear interface reconstruction (PLIC-VOF) is one of the most accurate. A study of the superficial tension impact on two-phase flow with free surface is presented. A new method based on direct staggered grid is developped to include surface tension in PLIC-VOF. The new numerical curvature calculation method doesn't need smoothed colour function and leads to less “spurious current”. This technique is applied to the calculus of surface tension force in the case of the rise of air bubble in viscous liquid and the fall of liquid drop in the same liquid on free surface. Droplets, thin layer and capillarity waves are observed after the free surface rupture for different Bond number. The influence of surface tension calculus is then obvioused and when the drop hit the free surface, wavelets propagate toward the virtual boundaries imposed.     

Diffusion Behaviour of Fe-Cu Interface of Copper Brazed Double-wall Steel Tubes

By means of electron probe(EPMA),scanning electron microscope(SEM),and optical microscope(QM),the diffusion behaviour on the Fe-Cu interface of copper brazed double-wall steel tubes andthe microstructure of the diffusion layer have been investigated.There are three kinds of metallurgicalbonds between copper plating layer and steel substrate: (1)the Cu diffusing into steel substratealong grain boundary of ferrite;(2)the Cu diffusion into grain bulk of ferrite: (3)the Fe diffusing intoCu layer.The copper brazed double-wall steel tubes are formed by the combination of the diffusionsmentioned above and this is the reason for excellent mechanical and technological properties of thecopper brazed double-wall steel tubes.