Investigation of the Anti-Methicillin-Resistant Staphylococcus aureus Activity of (+)-Tanikolide- and (+)-Malyngolide-Based Analogues Prepared by Asymmetric Synthesis

Herein, we report antibacterial and antifungal evaluation of a series of previously prepared (+)-tanikolide analogues. One analogue, (4S,6S)-4-methyltanikolide, displayed promising anti-methicillin-resistant Staphylococcus aureus activity with a MIC of 12.5 µg/mL. Based on the antimicrobial properties of the structurally related (−)-malyngolide, two further analogues (4S,6S)-4-methylmalyngolide and (4R,6S)-4-methylmalyngolide bearing a shortened n-nonyl alkyl side chain were prepared in the present study using a ZrCl₄-catalysed deprotection/cyclisation as the key step in their asymmetric synthesis. When these were tested for activity against anti-methicillin-resistant Staphylococcus aureus, the MIC increased to 50 µg/mL.     

Photocatalytic performance of Fe-substituted ZnAl2O4 powders under sunlight irradiation on degradation of industrial dyes

Using the sol–gel auto combustion method with diethanolamine (DEA) as fuel, a sequence of iron-substituted zinc aluminates, ZnFe_xAl_2-xO₄ powders, including variable Fe³⁺ ion concentrations (0 ≤ x ≤ 2) were effectively prepared. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), the Brunauer–Emmett–Teller (BET) method, UV–visible diffuse reflectance spectroscopy (UV-DRS), and vibrating sample magnetometer (VSM) were employed to examine the structures, chemical bonds, morphologies, composition, surface area, and optical properties as well as the magnetic behavior of the obtained samples. A single-phase spinel structure was obtained for the calcined aluminate powders with different interplanar spacing and crystallite sizes, as revealed by the classification results. The bandgap energy (E_g) of adapted aluminates was in the range of 2.04-3.14 eV, identified as being much lower compared to the pure sample (5.60 eV). Thus, Fe³⁺-substituted ZnAl₂O₄ samples could be successfully photoexcited using both ultraviolet and visible light, as suggested by the results. Examination of how the four main pollutant types decay when irradiated by sunlight was carried out to assess the samples and establish photocatalytic activity. These contaminants included rhodamine B (RhB), methylene blue (MB), methyl orange (MO), and methyl red (MR). The performance of photocatalytic degradation reached 98% after 150 min for all optimal samples of organic dyes. Besides, each of the altered photocatalysts could be recycled and displayed high stability. The S-shaped curve of ferrimagnetism can result in those samples as found by the magnetic measurements, though pure ZnAl₂O₄ displays diamagnetic characteristics. The adapted samples show intense improvement in the remanent magnetization (M_r) when compared to pure ZnAl₂O₄, signifying that magnetic photocatalyst recovery by applying an external magnetic field is easy. Thus, these results offer a convincing sign that ZnAl₂O₄ powders replaced by Fe³⁺ could provide the ability to aid in the ecologically friendly collection of solar energy.     

磁性金属有机框架材料制备及吸附性能研究

利用简单的溶剂热法合成了MIL-101（Fe）/CoFe₂O₄和MIL-101（Fe）/NiFe₂O₄磁性金属有机框架纳米复合材料。通过X射线衍射仪（XRD）、扫描电子显微镜（SEM）、振动磁强计（VSM）、热重分析仪（TGA）和紫外可见分光光度计（UV）等对复合材料的相结构、形貌、磁性能和吸附性能进行了研究。将磁性金属有机框架材料用于吸附污水中罗丹明B（RhB）,研究了罗丹明B初始质量浓度对复合材料吸附能力的影响。结果表明,制备的磁性金属有机框架复合材料的形貌均匀、结晶度高,具有高的饱和磁化强度。复合物具有金属有机框架材料和磁性材料的双重优点。MIL-101（Fe）/CoFe₂O₄对罗丹明B有较高的吸附能力（97.3 mg/g）。热力学研究发现吸附等温方程符合Langmuir模型,吸附动力学研究表明吸附机制与吸附质和吸附剂有关。磁性金属有机框架纳米复合材料作为污水处理剂将具有广阔的应用前景。     

工频磁场干扰识别及母线保护防误技术

分析工频磁场干扰对母线差动保护的影响,将各条支路上工频磁场干扰电流幅值和相位相似的特征与母线保护装置备用支路多的特点进行结合,通过母线保护装置的备用间隔的电流采样值特征识别工频磁场干扰并得到干扰值.计算补偿干扰电流后的差动电流,并在母线差动保护判据中增加补偿后差动电流相关的判据,有效防止发生工频磁场干扰时母线差动保护误动,提高了保护可靠性.仿真结果表明,所提算法能够准确有效地补偿工频磁场干扰,防止工频磁场干扰下母线差动保护误动,且不会影响区内故障下母线差动保护的性能.     

葫芦岛市钢屯镇赵家屯西山铜钼多金属矿成矿远景及找矿标志

赵家屯西山铜钼多金属矿位于葫芦岛市北西的钢屯镇南部,行政隶属于葫芦岛市连山区钢屯镇境内,位于杨家杖子—八家子构造岩浆的活动带内。区内燕山期花岗岩浆多次侵入,对成矿物质的活化集中起到重要的作用,是主要的物质来源及热动力条件;受区域性构造活动的影响,断裂构造发育,为成矿提供了重要的赋矿空间。地层、构造、岩浆岩三位一体的空间有利于多金属矿床的产出,具备形成热液充填交代型矿床的条件。     

铜冶炼炉渣回收选铁创效生产实践

金通公司采用炉渣缓冷、浮选回收铜,再磁选回收选铁工艺。经过生产组织及关键工艺控制指标优化,并加以技术攻关,在保障炉渣有效回收选铜各项指标后,产出了 50% 以上的铁精矿,熔炼渣与吹炼渣混合磁选铁精矿较原矿产率达到 35%,大幅度实现了尾矿减量化,更为公司增创了大额效益。     

铜冶炼渣尾矿综合利用现状及研究

铜冶炼炉渣含有大量的有价金属元素,经过选矿工艺处理后,大部分铜被回收,选出的渣精矿返回熔炼炉,渣尾矿外售至水泥厂,尾矿中有价金属仍存在较大利用价值,在现有工艺流程后增加磁选工艺,磁选后的铁精粉用作炼钢配料,尾矿外售。主要介绍了熔炼渣及尾矿成分,现有工艺尾矿处理方式,新工艺的应用及实践。     

一种消除小直径管道焊接应力技术的数值分析

小直径管道的应力腐蚀问题一直是工程界较难解决的问题，作者针对这一难题，提出了一种新型的消除应力方法——温差形变处理技术。利用MSC．Marc大型通用非线性有限元分析软件，对小直径管道环缝焊接接头的原始残余应力及温差形变法消除残余应力进行了有限元模拟，得到了一系列关于加热位置、加热宽度和加热持续时间的数据和规律。结果表明，采用温差形变处理技术，在内外表面的焊缝处都可以得到零值左右的残余应力，从而为进一步的试验分析工作和工程应用奠定了基础。     

矿床技术经济评价

简要介绍了矿床技术经济评价中的评价阶段及条件。论述了评价的原则、方法和要素。指出在技术经济评价中 ,地勘费是否计入投资 ,对评价的结果影响甚大     

解析参数对活性焦再生过程及再生效果的影响

 活性焦的热解析参数对再生活性焦的脱硫脱硝性能和机械强度至关重要。为了明确解析参数对活性焦再生过程和再生效果的影响规律,通过热解析试验探究活性焦硫残余比例、CO₂和CO生成量及再生活性焦脱硫脱硝性能随解析温度和解析时间的变化规律,继而明确适宜的活性焦热解析参数。结果表明,活性焦升温解析过程中,脱硫产物在317 ℃左右迅速分解,随后分解速率下降;在进入恒温解析阶段后脱硫产物分解速率先快速下降,而后进入缓慢解析状态。硫残余比例随恒温解析温度的升高而下降,在530 ℃下解析3 h可使脱硫产物完全解析;解析温度高于430 ℃后,活性焦表面的酚基、醌基、内酯基等含氧官能团分解量明显增加,并随恒温解析温度的升高而持续增加,分解所生成的CO和CO₂也随之大幅增加,这将使活性焦的孔隙结构进一步发展,继而不利于活性焦机械强度的保持;解析温度低于530 ℃时,硫残余比例随解析温度的升高而持续降低,使再生活性焦的脱硫脱硝性能持续提高;解析温度高于530 ℃后,含氧官能团分解量随解析温度的升高而持续增加,这将有利于提高活性焦表面SO₂氧化反应速率,继而使再生活性焦的脱硫性能持续升高,但酚基、内酯基等酸性含氧官能团的分解使再生活性焦对NH₃的吸附性能降低,进而使其脱硝性能降低。在兼顾再生活性焦脱硫脱硝性能、机械强度和生产效率等多方面因素时,430 ℃恒温解析3 h是相对较优的解析参数。在此解析条件下,再生活性焦的硫残余比例仅为1.8%,含氧官能团尚未发生大量分解,脱硫脱硝性能相对较为优良。