CLBO晶体化学机械抛光技术的研究

介绍了硼酸锂铯(CLBO)晶体的应用前景及在化学机械抛光过程中存在的问题,简要分析了晶体在常温下开裂的机理,选用无水溶剂对晶体进行化学机械抛光以防止加工过程中晶体的潮解开裂。分析了抛光液、压力、温度、pH值参数对抛光过程的影响,通过合适配比使速率可达1.5～2μm/min,且表面质量较好。     

高密度互连印制板

本文阐述了RCC材料与化学蚀刻法制作高密度互连印制板的工序和详细方法,意在探寻最为经济、简单而又行 之有效的工艺。     

流量比对等离子体基团分布和薄膜结构的影响

使用光强标定的发射光谱(AOES)测量了CHF3／C6H6混合气体的微波电子回旋共振(ECR)放电等离子体中基团的分布状态。实验发现随着CHF3流量的增加，成膜基团CF、CF2、CH等的相对密度增大，而刻蚀基团F的密度也会增加，从而使得a—C：F薄膜的沉积速率降低。同时红外吸收谱(IR)分析表明，在高CHF3流量下沉积的a—C：F薄膜中含有更高的C—F键成分。可见在a—C：F薄膜的制备中CHF3／(CHF3 C6H6)流量比是重要的控制参量。     

铝薄膜CMP影响因素分析

提出了在碱性抛光液中铝薄膜化学机械抛光的机理模型,对抛光液的pH值、磨料、氧化剂浓度对过程参数的影响做了一些试验分析。试验结果表面粗糙度的铝薄膜所需的最优化CMP过程参数:硅溶胶粒径为15～20nm,pH值为10.8～11.2,氧化剂浓度为2.5%～3%。     

井下注剂用小直径管起下装置的研制

针对目前国内小直径管井下注剂设备配套工具不完整,不能满足现场使用要求的情况,研制了井下注剂用小直径管起下装置。该装置采用可正反向旋转的液马达驱动主轴的方案,通过同步齿轮带动链条,夹紧机构使链条上的夹块夹住小直径管,由液压系统实现整个操作与控制,从而使装置上下运动。井场模拟试验表明,井下注剂用小直径管起下装置可完全满足小直径管起下作业的要求,且可避免小直径管管体的变形和损坏。     

A General Role for Early Onset Cues and Intra-Event Learning; Comment on McDonald and Siegel (2004).

Research on classical conditioning with drug unconditional stimuli has had a profound effect on the understanding of general conditioning processes. The experiment reported by R. V. McDonald and S. Siegel (see record 2004-10475-001) demonstrates that cues coincident with the onset of an event can become associated with the rest of the event. This sort of learning is probably ubiquitous and has been proposed as a mechanism behind the development of panic disorder, in which interoceptive cues coincident with the start of a panic attack can be associated with the rest of the attack and can eventually come to elicit full-blown panic on their own. Evidence that extinction exposure to early onset cues can reduce their power is especially important. Drug conditioning research continues to provide a powerful testing ground for important general principles of learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mixed oxide supported hydrodesulfurization catalysts—a review

Support effects form important aspect of hydrodesulfurization (HDS) studies and mixed oxide supports received maximum attention in the last two decades. This review will focus attention on studies on mixed oxide supported Mo and W catalysts. For convenience of discussion, these are divided into Al₂O₃ containing mixed oxide supports, TiO₂ containing mixed oxide supports, ZrO₂ containing mixed oxide supports and other mixed oxide supports containing all the rest. TiO₂ containing mixed oxides received maximum attention, especially TiO₂–Al₂O₃ supported catalysts. A brief discussion about their prospects for application to ultradeep desulfurization is also included. An overview of the available literature with emphasis on research carried out in our laboratory form the contents of this publication.     

Preparation and properties of nano-sized SnO2 powder

1　INTRODUCTIONSnO2isoneofthemainmaterialsusedingassensor.Becauseofthehumidityandgassensingfunction,itattractsmoreandmoreattentions.Butthepresentproblemishowtoimprovethestabilityandsensibilityofgassensor.Researchershavetakenmanymeasurestoresolvethisproble…     

采用纯化学物质校准仪器测定钛合金中碳量

采用纯化学物质对高频加热－红外检测碳硫仪校准，对钛合金中的碳量进行测定。     

碳纳米管(CNT)场发射显示器的关键技术的研究

对碳纳米管阴极的制备以及场发射显示器的真空封装技术进行了研究.利用一种新的碳纳米管生长工艺制备出了具有优良场发射性能的碳纳米管阴极.并将这种直接生长的碳纳米管薄膜作为阴极,结合一种弹性封装工艺,开发了一种具有简单字符显示功能的场发射显示器.该显示器在较低的工作电压下就可获得高亮度的显示效果,并且器件的亮度与驱动电压成较好的线性关系,这将有利于未来的碳纳米管场发射显示器实现高亮度和多级灰度显示.器件的持续工作寿命测试已经超过5500小时,充分验证了碳纳米管作为场发射阴极的应用潜力.