Optimization of downhole pump setting depths in liquid-dominated geothermal systems: A case study on the Balcova-Narlidere field,Turkey

Downhole pumps are being used increasingly more often in low-enthalpy geothermal wells. The depth at which these pumps are installed depends on the physical and chemical characteristics of the geothermal fluid, the production flow rate, and the reservoir pressure and permeability. In this study we have investigated the factors affecting pump setting depths in low-temperature, liquid-dominated geothermal systems and defined the relationship between flow rate and pressure drawdown based on multi-rate test results. The methodology proposed was applied to the Balcova-Narlidere geothermal field, Turkey. It was found that the most important parameters for determining the capacity and setting depth of a downhole pump were flow performance, non-condensable gas concentration, and temperature. The implementation of the methodology is illustrated.     

A Review of Dynamic Fracture Studies in Functionally Graded Materials

Abstract:  This article presents a review of dynamic fracture studies on functionally graded materials. A brief literature review on the fracture mechanics of graded materials is presented first. This is followed by a discussion on the higher-order asymptotic analysis of the transient elastic field surrounding the tip of a dynamically growing crack in a functionally graded material. A comprehensive experimental study of dynamic crack growth in model functionally graded material using the optical method of reflection photoelasticity and high-speed photography is then presented. The results are analysed to establish a generalised relationship between the crack velocity and the dynamic mode-I stress intensity factor (SIF). This relationship is found to be unique and is distinctly different from that previously established for the matrix material (polyester). Finally, an innovative experimental procedure is used to demonstrate the necessity of employing a fully transient stress-field representation in the analysis of optical data for an accurate prediction of the dynamic SIF history.     

基于视觉效果的雷达目标动态回波序列特征提取方法

特征提取在雷达目标识别中具有重要地位,提取有效、可靠的目标特征,是建立目标识别系统的基础和关键。在常规低分辨雷达目标识别系统中,难以根据电磁散射理论进行有效建模。本文在观察和分析大量实测数据的基础上,根据雷达操作员进行目标判性的思维过程和描述方法,以雷达目标动态回波序列的视觉效果为切入点,建立了一整套雷达目标特征提取方法。在多个雷达目标识别项目中的实际应用,证明了该方法的有效性、稳健性和可推广性。     

稀疏气泡流动的粒子跟踪测速技术研究

采用动态阈值技术实现了对气泡图像的正确分割，利用灰度加权方法提高了气泡颗粒的定位精度。根据稀疏气泡流动图像的特点，提出了一种新的基于相关的粒子跟踪测速算法（2-HPTV）。通过进行两时刻中围绕待研究气泡所取的两个小的诊断窗口的相关运算，成功实现了气泡颗粒的轨迹追踪。实验表明本文算法较传统的PIV技术在测速精度上有很大程度的提高，与4帧粒子跟踪测速算法相比，降低了对摄像机帧频的要求，具有较强的实用性。     

A pattern recognition-based approach for phylogenetic network construction with constrained recombination

The tree representation of evolutionary relationship oversimplifies the view of the process of evolution as it cannot take into account the events such as horizontal gene transfer, hybridization, homoplasy and genetic recombination. Several algorithms exist for constructing phylogenetic networks which result from events such as horizontal gene transfer, hybridization and homoplasy. Very little work has been published on the algorithmic detail of phylogenetic networks with constrained recombination. The problem of minimizing the number of recombinations in a phylogenetic network, constructed using binary DNA sequences, is NP-hard. In this paper, we propose a pattern recognition-based O(n²) time approach for constructing the phylogenetic network, where n is the number of nodes or sequences in the input data. The network is constructed with the restriction that no two cycles in the network share a common node.     

Development and simulation studies of an unsteady state biofilter model for the treatment of cyclic air emissions of an α‐pinene gas stream

This paper describes the development and simulation of an unsteady state biofilter model used to predict dynamic behaviour of cyclically‐operated biofilters and compares it with experimental results obtained from three, parallel, bench‐scale biofilters treating both periodically fluctuating concentrations and constant concentrations of an α‐pinene‐laden gas stream. The dynamic model, using kinetic parameters estimated from the constant concentration biofilter, was able to predict the performance of cyclic biofilters operating at short cycle periods (ie, in the order of minutes and hours). Steady state kinetic data from a constant concentration biofilter can be used to predict unsteady state biofilter operation. At a 24 h cycle period, the dynamic model compared well with experimental results. For long cycle periods (ie, hours and days), removal efficiency decreased after periods of non‐loading: the longer the period of non‐loading, the poorer the biofilter's performance at the re‐commencement of pollutant loading. At longer time scales the model did not effectively predict transient behaviour, as adsorption and changes in kinetic parameters were not accounted for. Modelling results showed that similar biofiltration performance for the cyclic and constant concentration biofiltration of α‐pinene is expected for biofilters operating solely in the first order kinetics regime. Poorer performance for cyclic biofilters following Monod kinetics spanning the entire kinetics range is expected as the cycle amplitude increases. The most important parameters affecting the performance of a cyclically‐operated biofilter with short cycle periods are: amplitude of cyclic fluctuations, C_{g, max}/C_g, relative value of the half‐saturation constant in the Monod expression, K_s, and effective diffusivity of α‐pinene in the biofilm, D_e. Copyright © 2005 Society of Chemical Industry     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

Fast dynamic casting

We describe a scheme for implementing dynamic casts suitable for systems where the performance and predictability of performance is essential. A dynamic cast from a base class to a derived class in an object‐oriented language can be performed quickly by having the linker assign an integer type ID to each class. A simple integer arithmetic operation verifies whether the cast is legal at run time. The type ID scheme presented uses the modulo function to check that one class derives from another. A 64‐bit type ID is sufficient to handle class hierarchies of large size at least nine levels of derivation deep. We also discuss the pointer adjustments required for a C++ dynamic_cast. All examples will be drawn from the C++ language. Copyright © 2005 John Wiley & Sons, Ltd.     

Experimental Study of Concrete Subjected to Explosive Loading

The main subject of this paper is to demonstrate the response of structural concrete to different imposed strain rates. Attention is focused on the strain rate about 10^-2 s ^-1>, where some technical difficulties are experienced when an exact determination of mechanical properties for quasi-brittle materials is attempted. The design of a measurement system, which realizes computer acquisition, analysis, and graphic representation of data, is also presented.     

Molecular Dynamic Simulation of Lattice Distortion Region Produced by Rounded Grain Boundary in Nanocrystalline Materials

The distortion structure in nanocrystalline NiAl is studied using molecular dynamics simulation.The rounded grain boundaries in these nanograins are a direct source for the observed lattice distortion.The change of grain size affects directly the volume fraction of the distorted lattice in the nanograin.