茂金属催化剂气相法聚乙烯中试研究

我国自行开发的茂金属催化剂在气相法聚乙烯中试装置上进行了运行试验和性能试验。考察了茂金属催化剂ＡＰＥ－１的运行稳定性和适应性以及聚合反应条件与催化剂活性、产品熔融流动性能和产品密度的关联性。经过测定，试验所得产品的相对分子质量分布特性与国外同类产品相近。     

DSS research and practice in perspective

The aim of this paper is to assess the state-of-the-art in the Decision Support Systems (DSS) field from both a research and a practice perspective. Three main dimensions of DSS research and practice are addressed: 1) supporting human decision-making processes, 2) integrating DSS into the organizational context, and 3) identifying new application domains. The related analysis and discussion provides a better understanding of past developments in the DSS field and insights into future evolution patterns.     

钠冷快堆中喷雾钠火的计算分析

根据钠冷快堆中喷雾钠火的特点建立了理论模型，编制了SSPRAY程序。该程序模拟钠喷雾燃料过程中钠滴的运动、钠和氧气的燃烧反应、热量传递和质量传递等瞬态过程。用该程序计算了气体和墙壁温度、气体压力、氧气摩尔份额、喷雾流燃烧速率和热量热递速率等主要参数。利用AI实验数据和美国SPRAY－3A的计算结果对程序进行了验证，结果符合较好。     

中国先进研究堆导流箱流场的数值模拟

采用目前国内普遍使用的计算流体力学 (CFD)软件PHOENICS 3 2对中国先进研究堆不同结构的导流箱的三维流场进行数值模拟计算。结果表明 :导流箱入口导流板和导流筒能显著改善导流箱入口冷却剂的流动状况 ,获得入口冷却剂沿周向均匀分流的效果 ,达到显著减缓入口冷却剂对垂直辐照孔道导管及安全棒导管直接的横向水力冲刷的设计目的     

Solar assisted cooling with sorption systems: status of the research in Mexico and Latin America

Solar refrigeration projects both national and international with sorption and other refrigeration systems have been developed in Mexico and other Latin American countries in the last 15 years. A review of the main projects, both for solar cooling and refrigeration and the results obtained are presented in this paper. A methodology where 19 solar technologies for cooling were identified is also presented. Although solar cooling is still not an economically viable technology, the advances made and the experience gained in the projects described and the improved systems envisaged, will make solar refrigeration systems play an important role in the future.     

Information systems effectiveness: research designs for causal inference

Abstract. This paper examines the capacity of the research designs of 37 empirical studies of information systems (IS) effectiveness to provide a basis for the development of theories about behaviour related to IS effectiveness. The power of each study to support causal inference was evaluated in terms of (a) its handling of the time dimension, (b) its ability to weigh differences and (c) its resistance to internal validity threats that pose alternative explanations for its reported findings. Of the reviewed studies, 29.7% could account for the time dimension, 32.4% employed a comparison group and 16.2% were not susceptible to any internal validity threats. Only 13.5% of the studies combined an accounting for the time dimension with the use of a comparison group. Of these, however, only 5.4% were also invulnerable to internal validity threats. The research designs of nearly 95% of these published studies were deficient in supporting causal inference. In those studies, suggestions that one variable was causally related to another variable could not be substantiated. Encouragement for the future capacity of IS effectiveness research to support causal inference was found in a trend towards the use of quasiexperimental designs. Recommendations are made regarding ways to increase the inferential capacity of research designs employed in the study of IS effectiveness.     

水泥膨胀珍珠岩砂浆的保温试验研究与应用

荆江分洪北闸加固工程２号护坦（斜面）混凝土的保温层采用了水泥膨胀珍珠岩砂浆，并对这种材料的保温效果进行了试验研究。试验表明：水泥膨胀珍珠岩砂浆降低最高温差，减小内表温差，缩小表温变幅和防止混凝土表面裂缝效果显著。在北闸２号护坦混凝土表面铺设１万平方米保温层，获得良好效果。     

信集闭系统进路数学模型及进路连锁表生成判据的研究

本文对信集闻系统中的长进路，进路及进路间的敌对关系等重要概念作了精确定义，并提出了进路的数学模型以及进路连锁表的生成判据。     

齿轮磨前滚刀的齿形研究

本文介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。为更加直观起见,还建立了模拟滚齿的数学模型。并在实验的基础上提出了参考标准。     

多级脉冲深穿透射孔技术

目前国内较先进的射孔工艺是增效射孔和三相流射孔,这2种射孔工艺均存在射孔深度和造缝深度浅的问题,尤其是对低渗油藏和纵向渗透率远大于横向渗透率的油藏,此造缝深度并不能满足油田生产的需要.介绍了一种新型的射孔技术,它是一种能进行深度射孔造缝的多级射孔技术,利用三级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲,多次冲击射孔孔眼前沿的裂缝,使其有效延伸至地层深处,从而较单独的射孔更能有效地增加油气产量.通过地面水泥靶的试验,证明了该射孔器的延缝功能和安全性;通过塘32等井的现场试验,证明该射孔技术对污染地层解堵有显著效果,可明显地降低地层破裂压力.