纳米陶瓷的制备

纳米陶瓷材料可显著降低材料的烧结致密化程度,节约能源;并可改善陶瓷材料的性能,提高其使用可靠性。主要介绍了纳米陶瓷的制备方法,包括纳米陶瓷粉体的制备、成型和烧结。     

微波功率管壳用焊料浇铸模的设计与制造

介绍一种微波功率管壳用焊料的模具的设计、制造工艺、表面处理和测量方法。     

铝合金结构件液固复合挤压模具的设计

挤压铸造和固态挤压的有效结合，能够得到组织致密的结构件。通过增加补偿板和垫板，能够较方便的实现挤压铸造后的固态挤压工序。本文介绍了针对圆柱形制件的液固复合挤压模具的模具结构和工作过程，这种一模两工序的设计思想也可应用于其他结构件的成形。     

Green and self-lubricating polyoxymethylene composites filled with low-density polyethylene and rice husk flour

Polyoxymethylene (POM) composites filled with low-density polyethylene (LDPE) and rice husk flour (RHF) were prepared by injection molding. The POM/5 wt % LDPE/7.5 wt % RHF composite exhibited the lowest wear rate, whereas the coefficient of friction remained low, and the POM/5 wt % LDPE/5 wt % RHF composite had the best mechanical properties. X-ray diffraction analysis was carried out, and the worn surfaces were examined with scanning electron microscopy. The results showed that the addition of the filler reduced the crystallinity degree of the POM composites. The main wear mechanism for unfilled POM was adhesion, whereas for the POM composites, wear seemed to occur mainly by fatigue and abrasion. It was experimentally confirmed that the POM composite filled with LDPE and RHF, which is well-performing, low-cost, and environmentally friendly, could be a potential material for tribological applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Finding feasible mold parting directions using graphics hardware

We present new programmable graphics hardware accelerated algorithms to test the 2-moldability of geometric parts and assist with part redesign. These algorithms efficiently identify and graphically display undercuts as well as minimum and insufficient draft angles. Their running times grow only linearly with respect to the number of facets in the solid model, making them efficient subroutines for our algorithms that test whether a tessellated CAD model can be manufactured in a two-part mold. We have developed and implemented two such algorithms to choose candidate directions to test for 2-moldability using accessibility analysis and Gauss maps. The efficiency of these algorithms lies in the fact that they identify groups of candidate directions such that if any one direction in the group is undercut-free, all are, or if any one is not undercut-free, none are. We examine trade-offs between the algorithms' speed, accuracy, and whether they guarantee that an undercut-free direction will be found for a part if one exists.     

改进工装设计提高轴承座的铸造质量

文章通过对轴承座铸件的工艺分析，提出了采用双面型板脱箱的造型工艺，通过实践证明该工艺提高了该铸件的生产效率和制造质量。     

压力铸造的现状与发展

概述了压力铸造技术的特点，总结了目前中国压铸与国外的差距，分析了我国压铸业面临的机遇和挑战，论述了压力铸造技术的新工艺，以及今后压力铸造的研发方向。     

4F0.06AC树脂吹塑薄膜技术的探讨

在加工应用试验的基础上。探讨了加工温度、吹胀比、超想线高度及设备对４Ｆ０．０６ＡＣ薄膜适宜的加工条件。     

Influence of the temperature profile in the interface on the bond strength of polyamide–polyurethane two‐component tensile bars

Two‐component tensile bars with polyamide 6 (PA) and thermoplastic polyurethane (TPU) unmodified and modified with 4,4′‐diphenylmethane diisocyanate (MDI) have been investigated. It is known that the bond strength of PA/TPU tensile bars can increase by about 50% if MDI‐modified polyurethane is applied. The subject of these studies is the analysis of the influence of the mass temperatures on the bond strength. The mass temperatures of the first and second injection process and the delay time between the first and second injection processes determine the temperature gradient in the interface at the moment of the second injection. There is an increase in the bond strength when there is an increasing temperature gradient; therefore, the mass temperature of the first component at the delay time has to be lower than the mass temperature of the second component. The temperature gradient can be used as a measure of the thermal annealing of the first component near the interface during the heat transfer from the second component. It can be concluded that effective thermal annealing causes an increase in the bond strength. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4297–4305, 2006