基于带缓冲的双通道开关技术的网络隔离器设计

在对网络隔离技术进行分析的基础上,研究利用网络隔离技术来解决网络安全问题。目前的网络隔离产品大多是采用基于硬件的开关控制,受限于现有硬件技术条件,并且厂家要根据不同用户要求而开发生产针对特定应用的网闸,不能方便地同时支持多种应用。提出了一种改进的安全隔离网闸实现方案。重点是模块化和软件方式实现开关技术,采用独立的软件开关控制和模块化设计,解决了现有物理隔离网闸产品在硬件开关控制和所支持应用上的限制,这种采用软件实现开关功能的方式避免基于现有硬件技术的可用性和寿命时间的限制。     

不同原料生产的CPE对PVC改性的影响

选取三种不同PE原料,采用相同的氯化工艺及配方生产CPE,通过对经CPE改性后的PVC流变性能测试和型材加工应用实验,研究了不同原料生产的CPE对PVC改性的影响。     

Crosslinking of cotton cellulose in the presence of alkyl diallyl ammonium salts. I. Physical properties and agent distribution

We used three kinds of alkyl diallyl ammonium salts (methyl, ethyl, and propyl) in combination with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents. The nitrogen content, dry crease recovery angle (DCRA), moisture regain, and wicking height for the DMDHEU/alkyl diallyl ammonium salts were in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇, but the wet crease recovery angle (WCRA) and tensile strength retention (TSR) were in the opposite order at the same resin concentration. For the same DCRA and TSR, the WCRA values for only DMDHEU were lower than those for DMDHEU/alkyl diallyl ammonium salts, and the WCRA values for DMDHEU/alkyl diallyl ammonium salts were in the order of ? C₃H₇ > ? C₂H₅ > ? CH₃. Both the ? OH group of the cellulose and DMDHEU could react with the vinyl or epoxy groups of the alkyl diallyl ammonium salts during the pad–dry–cure process. The surface migration for DMDHEU/alkyl diallyl ammonium salts was in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇. Fabrics treated with DMDHEU/alkyl diallyl ammonium salts showed good antibacterial properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1662–1669, 2003     

化肥渣油性质变化分析

对2006年全年化肥渣油数据进行汇总,找出了渣油性质大幅度变化的主要原因,对其中关键数据进行分析评价,并提出改进与预防措施,为化肥装置的平稳操作提供了参考.     

平行梁式电容传感器力学性能的仿真与分析

针对S型平行梁式电容称重传感器参数结构设计问题,运用有限元软件ANSYS Workbench对平行梁式弹性体结构进行参数化模拟仿真,基于二次多项式曲面拟合建立其结构力学性能与主要结构参数的函数关系,并通过算例分析验证了拟合公式的有效性。研究表明,拟合公式对复杂仿真计算后的结果有很好的近似,能更好的反应实际情况,公式结构更加简洁,具有较快的收敛速度、较高的精度和较好的推广能力,有利于准确实现平行梁式电容称重传感器结构参数设计。     

稀土顺丁橡胶／SBR体系的力学性能

稀土顺丁橡胶与丁苯橡胶（ＳＢＲ）共混，可以改善ＳＢＲ的耐低温性能。当稀土顺丁橡胶／ＳＢＲ（质量比）这２０／８０时，－３０℃的ｔａｎδ仅小于ＳＢＲ，６０℃的ｔａｎδ最小。其共混胶的应力－应变性能、湿滑指数、磨耗及生热性能均优于镍系顺丁橡胶／ＳＢＲ共混体系。     

煤的荧光特性与其工艺性能的关系研究

简述了煤中镜质组荧光产生的机理及荧光参数的测量方法,通过测定一系列煤的粘结性和10kg小焦炉结焦性试验,探讨了煤的荧光特性与其工艺性能的关系。煤的荧光参数与其反射率呈正的线性相关关系,与其挥发分含量呈负的线性相关关系;煤的粘结性、结焦性均与其荧光参数有关;当煤化程度相同、煤岩组成基本相同时,煤的荧光强度愈强,其结焦性能愈好。     

CaSO4晶须/聚氨酯弹性体复合材料性能的研究

笔者主要研究了CaSO4晶须对聚氨酯弹性体复合材料热性能和摩擦性能的影响。随Ca-SO4晶须含量的增加，复合材料的起始分解温度被提高，加入CaSO4晶须并未改变聚氨酯弹性体的化学结构，只是减慢了聚氨酯弹性体的热失重速率；随着CaSO4晶须含量的增加，聚氨酯弹性体复合材料的磨耗量降低。分析认为，加入CaSO4晶须后。阻止了聚氨酯弹性体结构的大面积破坏，改变了磨屑的形成机理，使其由纯聚氨酯的大的片状磨屑变为复合材料的小磨屑，从而降低了聚氨酯复合材料的磨损。     

二硼化锆基超高温陶瓷的制备及性能

用碳化硅(SiC)颗粒增韧二硼化锆(ZrB2)陶瓷,在氩气流中热压烧结温度为1 950℃、保温1 h,20 MPa压力下成功制备出了致密的ZrB2/SiCp复合材料.ZrB2/SiCp复合材料的致密度随着SiC颗粒添加量的增加而增加.当SiC颗粒的体积分数(下同)为15%时,相对致密度达到100%.ZrB2/SiCp复合材料的抗弯强度和断裂韧性都随着SiC添加量的增加成上升趋势,当SiC颗粒的添加量在15%时同时达得最大值,分别为646 MPa和8.52 MPam·m1/2.SiCp的添加还提高了ZrB2/SiCp复合材料的耐氧化烧蚀性能.     

Synthesis and elastomer behavior of a novel polymer electrolyte of acrylic ester–salt copolymer

This paper studied the synthesis of a novel elastomeric copolymer electrolyte in an aqueous phase. The monomer, sodium allyl sulfonate (SAS), was dissolved in continuous aqueous phase and the second monomer, methyl acrylate (MA), was supplied from MA micelles as dispersed phase. The copolymerization of the two monomers took place in continuous aqueous phase. Confirmed by FTIR and ¹H‐NMR, a binary copolymer electrolyte of MA and SAS, poly(MA‐co‐SAS), was obtained. The glass transition temperature of the copolymer was indicated as 20.4°C by DSC thermogram, thus, it behaves an elastomer in normal ambient temperature. The mechanical properties of the composite films consisting of both poly(MA‐co‐SAS) and Cu²⁺ ions or reduced copper were affected by the content of ions and reduced copper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2796–2802, 2006