利用罗果夫斯基线圈测量静电放电电流

分析了测量静电放电电流时Rogowski Coil的工作原理，并给出了其结构和电气参数的估算方法。通过试验验证了Rogowski Coil测量静电放电电流的可行性。同时还提出了利用屏蔽盒来避免外磁场对测量线圈干扰的方法，并对屏蔽盒设计的关键问题作了进一步的探讨。     

利用自身成型模进行汽轮发电机定子线圈引线封焊的设计

本文介绍了空冷135MW汽轮发电机定子线圈的成型及封焊模具的设计。通过对线圈自身成型模的改进,可以同时在成型模上进行引线封焊。     

谐振接地电力网自动调谐的新方法

采用新的测量原理，提出了可同时对谐振接地电力网脱谐度和电容电流进行实时测量的新方法。测量过程在线进行，不启动消弧线圈的调谐机构，不干扰电网的正常运行，适宜用于电网的实时监测系统。在准确测量脱谐度和电容电流的基础上，可实现对消弧线圈的精确调谐。该方法适用于任何类型的消弧线圈。     

应用于GIS保护及监测的罗氏线圈电子式电流互感器

论述罗氏线圈电子式电流互感器研发工作中各环节的误差、干扰及处理措施，提出温度变化时骨架、线圈的变化差异及复合影响的分析方法．采用线圈的温度老练方法使其尽快达到稳定状态。采用罗氏线圈新型回绕线技术和严格的线圈绕制工艺，保证了罗氏线圈的抗外界磁场干扰性能。对于样机进行了大量的实验检验．证明回绕线是一个非常有效的抗干扰措施．按照本文方法制作的罗氏电流互感器满足0.5级准确度要求，完全可用于电力系统的保护和监控.     

TBM-160-2型汽轮发电机定子绕组击穿原因分析与处理

分析TBM-160-2型发电机定子绕组击穿的原因，介绍定子绕组击穿后的处理方法和过程，对定子油冷发电机的处理具有指导作用，为我国将来制造和引进大容量定子油冷发电机积累检修经验。     

发电厂厂用电系统中性点接地的新方法

针对发电厂厂用电系统的特点，分析了以往常用的几种中性点接地方式所存在的问题，提出了一种基于现代先进技术的新型接地方式——快速消X弧线圈接地加快速选线(跳闸)，介绍了可实现该接地方式的产品——KD—XH型智能化快速消弧系统和DDS型接地故障智能选线装置，并论述了该接地方式的优点和发展前景。     

偏磁式消弧线圈的新型调谐原理

偏磁式消弧线圈的现有调谐方法，在电网极度平衡地区，电容电流检测精度受到限制。本文提出采用注入法的偏磁式消弧线圈的新型调谐方法，并进行系统设计，研发出基于双机通讯式的采用注入法的偏磁式消弧线圈控制器样机。试验结果表明，新型原理正确，满足现场应用要求。     

一种新的谐振接地系统的研制

提出了一种应用可控硅技术并采用全新的高短路阻抗变压器式可控消弧线圈的新的谐振接地消弧系统。消弧线圈由一个一次线圈及两个二次线圈构成，通过两组SCR控制消弧线圈二次电流，结合电流调节算法能有效抑制谐波，系统电抗具有优良的伏安特性，采用拟合曲线法确定可控硅的导通角与消弧线圈补偿电流的关系。模拟实验与现场运行验征了设计的有效性。     

Low-frequency quadrature mode birdcage resonator

The birdcage resonator is frequently used in conventional MRI because of its excellent attributes. Its use in low-field MRI is restricted to field strengths higher than, for example, 0.1 T, dependent on the size of the coil. This is because of the intrinsically low inductance value of the birdcage coils. Furthermore, the sensitivity of the birdcage at low field strengths is significantly lower when compared to, for example, the solenoid. Both problems can be overcome with the multiturn technique and a novel wound birdcage coil. The quadrature mode wound birdcage coil presented in this paper can be used at frequencies as low as 100 kHz. Its sensitivity is also increased when compared to the conventional strip-ring birdcage. Homogeneity effective volume, and methods to increase the resonator bandwidth to match the signal bandwidth are left intact. The latter is a typical low-field problem.     

Optimal packing of transformer coil via dynamic programming

One of the transformer major design elements is its core design. The good performance of the transformer requires its coil core to be laminated and composed of different - widths stepped layers of specific steel packed together. For optimum design, the cross sectional shape of the core must be as circular as possible. So, an optimal packing can be attained by maximizing the steel core coverage. The number of different widths of steel plates n is selected to compose the packed core for a coil of diameter d. Then, an optimum sequence of decisions, for the n widths as well as the number of thin plates of each, is required. Dynamic programming (dp) is concerned with this optimum sequential decisions. An adequate forward recursive equation is formulated , because there isn't a standard dp model for all sequential decision making problems. To implement the recursive computations, a FORTRAN program is developed. Assuming that d is given the values 150, 200, 250, 300, 400 and 500 mm. while giving n the values from 2 to 15, the program is run at different combinations of n and d. It is found that maximum core coverage is sensitive to changing of n but it is slightly affected by changing of d.