中压汽包法兰断裂失效原因分析及改进措施

本文针对中压汽包法兰断裂失效原因进行分析，指出汽包上两个法兰同时断裂的原因在于安全阀排汽管路设计上的失误，并提出对安全阀排汽系统的改进措施。     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

考虑边界反射的河流离岸排放污染混合区计算方法

在等强度点源离岸排放条件下,从简化二维移流扩散方程的解析解出发,探讨了考虑两岸反射作用的中宽河流污染混合区的计算方法。给出了污染混合区边界形状曲线与量纲一方程的形式;采用迭代计算和试算比较法,给出了靠岸与离岸两种类型混合区各几何特征参数(坐标)、面积及面积系数与相对离岸距离的关系曲线,提出了以相对离岸距离a'作为判据的排放类型分区条件。给出了河流岸边、离岸与中心排放的分类判别准则:(1)当0≤a'≤a'1时,简化为岸边(近岸)排放类型;(2)当a'1a'a'2时,称为离岸排放类型;(3)当a'2≤a'≤0.5时,简化为中心排放类型,并给出了岸边排放类型与离岸排放类型的临界相对离岸距离a'1和中心排放类型与离岸排放类型的临界相对离岸距离a'2的表达式。通过回归分析,给出了中宽河流离岸排放类型混合区主要特征参数的实用计算公式,可作为中宽河流污染混合区范围计算和排污口位置优化设计的依据。     

基于泄洪移民区域分汊河道泄流相互影响的模型试验研究

基于政府的组织行为、政府的协调行为和政府的监督行为与行洪移民区域后期扶持的具体工作的研究,治淮工程移民安置方案产生31.2亿元的投资。移民区域的大小与安全行洪区范围直接相关,分汊河道行洪的最佳分流比决定了行洪的安全与否。为了探讨复杂并联泄洪河道中不同的闸门控制对泄流的影响,论文结合淮河入江水道归江控制段模型试验,对复杂分汊并联河道的分流比及其流态对河道的稳定等进行了分析研究。通过对所采集的水位流量资料进行理论分析,按照不同的闸门开度组合,结合水面流态,系统分析入江水道中下段分汊并联河道在不同的流量下最优闸门开度组合及支汊分流比。单闸控制,主汊河道闸门开度一定时,分流比随着总泄流量增加而减小,两支汊河道分流比基本相同,且随总泄流量增加而增加。双闸控制,主汊河道和支汊河道闸门组合调节时,主汊分流比同单闸控制,支汊分流比变化量来自主汊,不影响其他支汊河道分流比。最优闸门开度为主汊单闸控制2/3开度,最优分流比为76%、12%、12%,在此分流比下行洪,将保持移民后期区域不扩大或缩小。     

三峡水库下游荆江河段推移质输沙率计算方法分析

根据荆江沙市水文站与监利水文站共380组次推移质输沙率与断面水力要素的实测资料,分析了推移质泥沙的输移特性,建立了推移质输沙率与流量之间的关系式,并利用实测资料对Engelund-Hansen和Einstein推移质输沙率公式进行了检验与修正。研究结果表明:荆江河段沙市站与监利站的实测推移质泥沙年输移量位于137~388万t之间,主要发生在汛期的5-10月,约占全年的75%,而且沙市站断面的年均输沙量小于监利站;推移质输沙率与流量的1.3511次方成正比,呈显著相关。Engelund-Hansen与Einstein公式直接用于计算荆江河段推移质输沙率均存在系统偏差,修正后的公式与实测资料吻合较好,呈高度相关,其中Einstein的修正公式相关度更高。研究成果可用于荆江河段推移质输沙量的计算与河床演变分析。     

Immobilization of biologically active species on PA‐6 foils treated by a dielectric barrier discharge

In the field of biomaterials and biomedical devices, surface activation has been focused on creating functional groups capable of preferential adsorption of biologically active species (proteins, enzymes, cells, drugs, etc.). In this way an interface can be created between the synthetic material and the biological medium, with the aim of increasing the compatibility of the implant with the human organism. In our experiments a dielectric barrier discharge (DBD), in helium at atmospheric pressure, was used as the source of energy capable of creating active centers that render the functionalized surface favorable to immobilization of biological molecules. Retention of immunoglobulin (IgG) and heparin biomolecules on polyamide‐6 (PA‐6) surfaces after treatment by the DBD was analyzed by atomic force microscopy, adhesion evaluation, and measurement of the contact angle titration in order to assess this incorporation on the treated surfaces. The marked adsorption of the biomolecules on the active sites created by DBD on the exposed surfaces also was related to a complex set of processes, such as enhanced roughness, increased surface wettability, and modified distribution of cationic and anionic groups on the treated surfaces. All these factors could promote interfacial interactions between the specific groups of the biomolecules existing in the biological medium and the type of cationic and/or anionic groups present on the surface. The efficiency of the DBD treatment showed that the DBD technique is useful for preactivation of the polymer surface for immobilization of other biologically active species (such as drugs and enzymes). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1985–1990, 2003     

水文监测创新在2016年长江洪水测报中的作用

2016年,长江中下游发生了区域性大洪水。为保证洪水预报的水文资料需求,长江委水文局通过建立的由水文监测管理体系、水文监测服务体系、水文监测技术支撑体系、水文监测质量保障体系等四大部分组成的水文监测体系创新与关键技术,以“巡测优先、驻巡结合、测报自动、应急补充”的新型水文监测模式,大大提升了防洪监测的能力和水平。与往次防洪监测比较,在应对2016年的大洪水的过程中,长江水文测验的新型模式带来了测洪能力、技术水平、准确度、时效性的系统性提升,其中,流量测验时间缩短了73%~83%,水情信息到报率和准确率达到99.95%,远远高于国家标准。     

氯乙烯生产先进工艺简介

针对国内氯乙烯生产工艺存在的主要问题，分析了与国外先进工艺的主要差距，介绍了引进的国外先进工艺的基本情况。     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.