高熵氧化物的制备及应用研究进展

高熵氧化物作为近几年发展起来的新型氧化物体系，打破了传统掺杂氧化物的设计理念，由五种及以上氧化物以等摩尔或近等摩尔构成，因其具有简单的结构和优异的性能等受到国内外研究人员的广泛关注。高熵氧化物由于多主元且主元之间混乱排列，易形成岩盐型、氟化钙型、尖晶石型或钙钛矿等固溶体结构，从而表现出优异的性能，尤其在能源存储材料和磁性材料方面有十分广阔的应用前景，但目前对高熵氧化物应用研究较少。本工作介绍了国内外高熵氧化物的制备方法，主要包括固相法、热解法、共沉淀法、水热合成法和液相燃烧合成法等，比较了各方法的优缺点和发展前景；归纳了高熵氧化物作为锂离子电极材料、巨介电材料、磁性材料和催化材料等方面的应用；指出了高熵氧化物目前研究存在的问题，讨论了解决措施，展望了高熵氧化物未来的发展趋势。     

Broadband bowtie belt nanoantennas

In this article, we study a linear array of bowtie nanoantennas placed between two metallic strips that can work from 800 to 1420 nm (600 nm linewidth), with an electric field enhancement factor close to 20. We study the dynamical change of the position of the electric field enhancement amongst different elements in the array and, at the same time, the effects of dispersion on the scalability of the array elements. A systematic analysis and methodology to produce an array that can operate over a large bandwidth whilst maintaining the electric field enhancement without significant variation is provided.     

Behaviour of Surface Defects in Wire Rod Rolling

Defects are often present in rolled products, such as wire rod. The market demand for wire rod without any defects has increased. In the final wire rod products, defects originating from steel making, casting, pre‐rolling of billets and during wire rod rolling can appear. In this work, artificial V‐shaped longitudinal surface cracks have been analysed experimentally and by means of FEM. The results indicate that the experiments and FEM calculations show the same tendency except in two cases, where instability due to fairly “round” false round bars disturbed the experiment. FE studies in combination with practical experiments are necessary in order to understand the behaviour of the material flows in the groove and to explain whether the crack will open up as a V‐shape or if it will be closed as an I‐shape.     

Optoelectronic Method of Noncontacting Reconstruction of the Profile of a Surface of Three Dimensional Objects of Large Dimensions

An optoelectronic method is considered for noncontacting reconstruction of the surface profile of three-dimensional objects of large dimensions. The optimal conditions for performing measurements are identified. It is shown that the proposed method, in contrast to the already known methods, does not require fine tuning of the equipment. A numerical method is given for compensating distortions caused by aberrations. A method is described for reconstructing the surface profile cell by cell which increases the accuracy of measurements.     

DFIT测试在长庆气田开发中的应用

与常规的小型测试压裂不同，流体注入诊断测试（DFIT）是通过关井阶段出现的拟线性流或拟径向流阶段求取储层压力，采用改进的梅耶霍夫方法（M-method）解释储层渗透率。以长庆榆林气田一口开发井为例，依据DFIT的技术原理和测试步骤，对该井测试压降数据进行解释分析，结果可信度较高，证明了该项工艺在长庆低压低渗油气田的可行性。     

对理想弯曲街道进行场强预测的方法

提出了一种新的射线跟踪接收判断技术,它是已有的两类射线跟踪技术的结合,能够解决曲面反射的问题。这种新技术能够在任意形状建筑物组成的复杂环境中进行场强预测。而且此种方法可以自由的改变接收球的半径,以满足精度的需要。     

基于对比折射法的三维静校正技术及其应用

在地形起伏剧烈、速度和厚度横向变化大的地区，折射静校正技术的应用受到诸多限制，主要表现在不能准确地识别和拾取来自于地下连续地质界面的折射波，使得精确求取的长波长静校正量困难。为此，提出了一种基于对比折射法的三维静校正技术。介绍了这种静校正技术的方法原理和特点，基于对比折射法的折射波至拾取实质上是一个折射层的对比分析解释过程，因此能准确地拾取折射波至，精确地求解低速带的绝对延迟时；然后利用延迟时和近地表速度模型（等效，时深，空变）反演表层模型，最终一次性完成基准面静校正（包含低速带校正和高程校正）。在黄土塬、沙漠以及沙漠和山地的接合部等地区，利用基于对比折射法的三维静校正技术进行静校正处理，使资料的品质得到了明显改善，反射同相轴连续性好，信噪比和分辨率高，构造形态清晰可靠，提高了勘探精度。     

咪唑啉型缓蚀剂的合成及其缓蚀性能研究

以棕榈酸、二乙烯三胺为原料合成咪唑啉，并对其进行水溶性改性制备了咪唑啉型缓蚀剂YG-1，与助剂硫脲复配得到复配缓蚀体系YG-2。应用静态挂片失重法、电化学法评价了该复配缓蚀体系YG-2的缓蚀性能，研究了缓蚀机理，并用扫描电镜分析了腐蚀前后及加入复配缓蚀体系YG-2后A3钢的表面形貌。研究结果表明，在30℃下加入复配缓蚀体系YG-2能有效地抑制饱和CO2的高矿化度盐水对A3钢的腐蚀，其使用浓度为20mg／L时，缓蚀率达到98．5％，腐蚀速率仅为0．009mm／a，远好于我国石油天然气行业标准规定的指标。     

BaTiO3基Au纳米颗粒复合薄膜的制备及其光学性质研究

采用溶胶-凝胶（sol-gel）方法，成功的将高体积面分比的Au纳米颗粒复合到BaTiO3的非晶薄膜中，并对其光学性质进行了研究。用XRD、TEM、椭偏仪、吸收光谱、光克尔效应OKE（Optical Kerr Effcet）方法对薄膜进行了表征和测试。从吸收光谱观察到表面等离子体共振SPR（Surface Plasma Resonance)峰随热处理温度升高而红移的现象。光学非线性测试表明薄膜具有高的三阶非线性极化率Χ^(3)和超快的响应时间。     

Effect of Strain Rate on Discontinuous Flow and Mechanical Characteristics of High-Nitrogenous Steel

Experimental study on the effect of strain rate on discontinuous flow and mechanical characteristics of the high-nitrogenous steel Kh23AG19F has been performed. Within the range of strain rates from 4.62 · 10^-5 to 1.85 · 10 ^-4 s^-1, discontinuous flow, reflected by serration on the tensile diagram, is chiefly determined by intergranular deformation mechanisms. Under strain rates over 1.85 · 10^-2 s^-1, combined deformation modes prevail, which cause a change in the character of discontinuous flow and transform a serrated tensile diagram into a wavy graph, with the yield stress of steel increased significantly.