Solution of temperature fields in hydrodynamics bearings by the numerical network method

Solution to the 2-D steady-state nonlinear heat conduction equation, involving cylindrical coordinates, applied to a plain bearing by a simple and versatile numerical technique based on network method is presented in this work. These advantages of the technique are necessary for the status evaluation of industrial machines during operation because time and computing resources are limited. The pressure field in the fluid is previously solved from the Reynolds equation by finite element method. The main difficulty is associated with the exponential dependency of the viscosity on temperature. The proposed model is very efficient and requires negligible computing times. Solutions are very close to the experimental and numerical results of other researchers.     

Experimental data and approximate estimation for dissociation time of hydrate plugs

New experimental data coupled with a numerical model and an approximate solution are proposed to predict dissociation time of hydrate plugs in oil sub-sea pipelines. The experimental hydrate plugs are dissociated by the method of symmetric depressurisation, both in a specially designed apparatus and a classical batch reactor. The agreement between the estimation of the model and the experimental data and the simplicity of the approximate equation presents an advantage in estimating the time of hydrate plug dissociation in pipelines.     

Comparative analysis of urban reflectance and surface temperature

Urban environmental conditions are strongly dependent on the biophysical properties and radiant thermal field of the land cover elements in the urban mosaic. Observations of urban reflectance and surface temperature provide valuable constraints on the physical properties that are determinants of mass and energy fluxes in the urban environment. Consistencies in the covariation of surface temperature with reflectance properties can be parameterized to represent characteristics of the surface energy flux associated with different land covers and physical conditions. Linear mixture models can accurately represent Landsat ETM+ reflectances as fractions of generic spectral endmembers that correspond to land surface materials with distinct physical properties. Modeling heterogeneous land cover as mixtures of rock and/or soil Substrate, Vegetation and non-reflective Dark surface (SVD) generic endmembers makes it possible to quantify the dependence of aggregate surface temperature on the relative abundance of each physical component of the land cover, thereby distinguishing the effects of vegetation abundance, soil exposure, albedo and shadowing. Comparing these covariations in a wide variety of urban settings and physical environments provides a more robust indication of the global variability in these parameter spaces than could be inferred from a single study area. A comparative analysis of 24 urban areas and their non-urban peripheries illustrates the variability in the urban thermal fields and its dependence on biophysical land surface components. Contrary to expectation, moderate resolution intra-urban variations in surface temperature are generally as large as regional surface heat island signatures in these urban areas. Many of the non-temperate urban areas did not have surface heat island signatures at all. However, the multivariate distributions of surface temperature and generic endmember fractions reveal consistent patterns of thermal fraction covariation resulting from land cover characteristics. The Thermal-Vegetation (TV) fraction space illustrates the considerable variability in the well-known inverse correlation between surface temperature and vegetation fraction at moderate (< 100 m) spatial resolutions. The Thermal-Substrate (TS) fraction space reveals energetic thresholds where competing effects of albedo, illumination and soil moisture determine the covariation of maximum and minimum temperature with illuminated substrate fraction. The dark surface endmember fraction represents a fundamental ambiguity in the radiance signal because it can correspond to either absorptive (e.g. low albedo asphalt), transmissive (e.g. deep clear water) or shadowed (e.g. tree canopy shadow) surfaces. However, in areas where dark surface composition can be inferred from spatial context, the different responses of these surfaces may still allow them to be distinguished in the thermal fraction space.     

Heat transfer enhancement by Marangoni convection in the NH3–H2O absorption process

The objectives of this paper are to quantify the effect of Marangini convection on the absorption performance for the ammonia–water absorption process, and to visualize Marangoni convection that is induced by adding a heat transfer additive, n-octanol. A real-time single-wavelength holographic interferometer is used for the visualization using a He–Ne gas laser. The interface temperature is always the highest due to the absorption heat release near the interface. It was found that the thermal boundary layer (TBL) increased faster than the diffusion boundary layer (DBL), and the DBL thickness increased by adding the heat transfer additive. At 5 s after absorption started, the DBL thickness for 5 mass% NH₃ without and with the heat transfer additive was 3.0 and 4.5 mm, respectively. Marangoni convection was observed near the interface only in the cases with heat transfer additive. The Marangoni convection was very strong just after the absorption started and it weakened as time elapsed. It was concluded that the absorption performance could be improved by increasing the absorption driving potential (x_vb−x_vi) and by increasing the heat transfer additive concentration. The absorption heat transfer was enhanced as high as 3.0–4.6 times by adding the heat transfer additive that generated Marangoni convection.     

Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

房间空调器高效节能技术分析

本文主要介绍了高效节能型空调器的优化设计，包括选用高效压缩机、增大换热面积，增大风量、管路的合理设计，旨在提高制冷量，降低功耗，提高能效比。     

锌基合金模具的应用及探讨

本文分析了锌基合金模具制造及使用过程中容易出现热裂、翘曲、收缩的问题，并提出了解决这些问题的措施。     

百万吨级乙烯冷箱的设计

分析了百万吨级乙烯冷箱的设计难点和采取的对策，介绍杭氧设计、制造的乙烯冷箱的技术参数和设计方案，与国外公司设计方案的比较，说明杭氧乙烯冷箱的设计、制造技术与世界先进水平的差距大大缩小。     

Improvement in Stress Corrosion Crack Growth Resistance of an Austempered Cast Steel by a Novel Two-Step Austempering Process

An investigation was carried out to examine the influence of microstructure on the stress corrosion cracking (SCC) growth behavior of an austempered high-carbon (1.00%), high-silicon (3.00%), and high-manganese (2.00%) cast steel. Compact tension specimens were prepared from this cast steel as per American Society for Testing Materials standard E-399 and were given four different heat treatments to produce different microstructures. The SCC behavior of these specimens was studied in 3.5% NaCl solution. The test results indicate the K_ISCCvalue of the material increases as the austenite content increases. Significant improvement in SCC resistance was achieved by using a novel two-step austempering process. Intergranular crack growth was observed in all these specimens.