多周期多原料的供应链网络成本优化及其混合遗传算法

建立并求解一个基于成本最小的供应链网络模型.与以往研究不同,在该模型中生产一种产品需要至少两种原料,每种原料都可以由备选供应商提供.根据模型的特点,用0、1代表对原材料供应商、工厂和分销中心的选择情况,以MATLAB 7.6为平台,运用Sheffield大学的遗传算法工具箱,将遗传算法与线性规划算法相结合,实现了模型的求解.算例结果表明,给出的染色体编码方案正确,混合遗传算法有效,能解决多周期、多原料的供应链网络成本优化问题.还探讨了需求和距离变化,以及需求随机时对最优成本和最优个体的影响.研究表明,需求变化的影响大于距离变化的影响,需求随机对最优成本和最优个体的影响不大.     

基于条件风险价值的零售商创新投资决策研究

研究了由风险中性制造商和风险规避零售商构成的供应链创新投资问题。通过运用条件风险价值（CVaR）对企业的风险偏好进行测度,构建了分散供应链和集中供应链两种情况下的企业决策模型,并根据数值实验对模型作了进一步的分析。研究结果表明：零售商越担心风险,其对创新的投入越少,并会减少销售量以应对市场风险,从而使得供应链的整体收益下降;分散供应链下的创新投入、销售量和供应链的期望收益低于集中供应链下的创新投入、销售量和供应链的期望收益。施行收益共享契约后,分散供应链下的创新投入和销售量达到了集中供应链下的决策水平,制造商和零售商的期望收益均得到提高。     

A STUDY OF SILICONE OIL-IN-WATER EMULSIONS

Emulsions of silicone oil-in water were formed using a Brinkmann Polytron homogenizer with Igepal CO-530 as an emulsifier. Silicone viscosities ranged from 10 to 33,000 mPa.s at 25°C. Rheological characteristics and particle size analyses of silicone oil-in-water emulsions were studied. At high volume fraction of the dispersed phase (70%-75%), silicone oil-in-water emulsions were stable. At lower volume fractions (50%-60%), emulsions formed were less stable and the two phases easily separated in a few days. The emulsions formed with high volume fraction silicone oil show highly non-Newtonian behavior (shear thinning). Emulsions made with low viscosity oils had lower viscosities than those made from high viscosity oils. Relative viscosity-concentration data could be correlated by the Frankel and Acrivos Equation. Increasing the emulsifier concentration of 70% oil-in-water emulsions resulted in a decrease in mean droplet size and an increase in emulsion viscosity. Increasing the intensity of agitation also resulted in higher viscosity and smaller droplet size until a critical energy input above which droplet size increased. Emulsification with low shear mixing provides more control in decreasing mean droplet size with time.     

耐温抗盐型丙烯酰胺共聚物的研究进展

根据分子设计原理,耐温抗盐型丙烯酰胺共聚物分耐温、耐盐单体共聚物、两性共聚物、疏水缔合共聚物、多元组合共聚物和梳形聚合物。综述了丙烯酰胺共聚物的耐温、抗盐的机理,介绍了驱油用耐温、抗盐型丙烯酰胺共聚物的研究现状及发展趋势,指出了丙烯酰胺共聚物在耐温、抗盐性能方面改进的关键是引入某些特殊结构。     

粗TiCl4除钒工艺探讨

研究了粗TiCl4除钒的工艺过程，通过试验比较了各种有机物除钒的效果，结果表明矿物油除钒性能优异。1t粗TiCl4加矿物油2～4kg，反应温度135～138℃，反应时间60min，收率大于95％，质量达到企业产品标准要求。     

A comparative study on the effect of promoter content of hydrodesulfurization catalysts at different evaluation scales

CoMo and NiMo supported Al₂O₃ catalysts have been investigated for hydrotreating of model molecule as well as industrial feedstock. Activity studies were carried out for thiophene and SRGO hydrodesulfurization (HDS) in an atmospheric pressure and batch reactor respectively. These activities on sulfided catalysts were evaluated as a function of promoter content [M/(M + Mo) = 0.30, 0.34, 0.39; M = Co or Ni] using fixed (ca. 8 wt.%) molybdenum content. The promoted catalysts were characterized by textural properties, XRD, and temperature programmed reduction (TPR). TPR spectra of the Co and Ni promoter catalysts showed that Ni promotes the easy reduction of Mo species compared with Co. With the variation of promoter content NiMo catalyst was found to be superior to CoMo catalyst for gas oil HDS, while at low-promoter content the opposite trend was observed for HDS of thiophene. The behavior was attributed to the several reaction mechanisms involved for gas oil HDS. A nice relationship was obtained for hydrodesulfurized gas oil refractive index (RI) and aromatic content, which corresponds to the Ni hydrogenation property.     

利用俄罗斯石油和天然气资源的有关问题探讨

针对我国石油、天然气资源短缺的实际状况，分析了俄罗斯远东地区石油、天然气资源在数量、品质和地理环境等方面存在的优势，对我国利用俄罗斯远东地区原油、天然气资源，拓展石油，天然气资源供应来源，提高国家石油战略安全的可能性和必要性进行了初步的探讨。     

提高轻苯产率和降低洗油消耗的措施

通过对粗苯装置设备的改造和优化操作,既解决了设备能力与生产负荷不匹配的问题,又提高了轻苯收率和降低了洗油消耗。     

Formulations for an inventory routing problem

In this paper, we present and compare formulations for the inventory routing problem (IRP) where the demand of customers has to be served, over a discrete time horizon, by capacitated vehicles starting and ending their routes at a depot. The objective of the IRP is the minimization of the sum of inventory and transportation costs. The formulations include known and new mathematical programming formulations. Valid inequalities are also presented. The formulations are tested on a large set of benchmark instances. One of the most significant conclusions is that the formulations that use vehicle‐indexed variables are superior to the more compact, aggregate formulations.     

Coordination between strategic forest management and tactical logistic and production planning in the forestry supply chain

In this paper, we study the coordination mechanism in the forestry supply chain between strategic forest management and tactical production planning. We first formulate an integrated model to establish a theoretical benchmark for performance of the entire supply chain. It is a mixed integer programming model that involves harvesting, bucking, transportation, production, and sales decisions for both tactical and strategic planning levels. We then present two sequential approaches S‐A and S‐B where the coordination is done through internal pricing. S‐A is the approach currently used in practice where harvesting in the forest is the main driver of the supply chain activities and internal pricing is introduced to control bucking decision in a separate stage. In contrast, S‐B takes downstream demand information into consideration and internal pricing directly influences harvesting decision in the first stage. In order to find the appropriate setting of internal pricing that leads to the system optimum, we suggest two heuristics H‐I and H‐II. The internal pricing in H‐I is based on dual values and in H‐II, it is derived from a Lagrangian decomposition. A real‐life case study in the Chilean forestry industry is used to compare the results of different approaches. It is shown that the new sequential approach S‐B generates as good feasible solution as that obtained from the integrated approach but in much less time. Both heuristics H‐I and H‐II bring about near‐optimal feasible solutions. H‐II also provides optimistic bound of the optimal objective function value, which can be used as a measure of the solution quality.