吸附精制提高催化裂化柴油的安定性

用卸出的催化裂化平衡催化剂对催化裂化柴油进行吸附精制，取得了很好的效果。精制油收率99％以上，其安定性达到了优级轻柴油的标准（沉渣＜2．0mg／100mL，色号≤16）。精制后柴油的胶质下降约1个百分点，对吸附物的组成分析表明，其氮含量是柴油的17倍以上。对精制油的分析表明，吸附精制可明显降低柴油的酸度和碱性氮化物的含量。     

变结构变参数设计方法及其在机械CAD中的应用

提出了一种新颖的机械结构设计思想－变结构变参数设计方法，并结合实例，阐述了变结构变参数设计的概念、原则、实施措施和意义。由此对Ｉ－ｄｅａｓ软件包进行了二次开发，编制了发动机曲轴专用ＣＡＤ软件程序，并用某型号发动机曲轴进行了验证。     

超径大块石二次爆破简便引爆装置的研究与应用

岩石爆破工程中,不可避免的会产生一些超径大块石,这些大块石一般质量都非常好,能满足砼对骨料质量的要求,但一般情况下都要进行二次爆破才能满足粒径要求。本文介绍了白石水库工程超径大块石二次爆破过程中工程技术人员经过技术研究和实验,利用废弃的导爆管与价格低廉的火雷管组合制成了技术上可行,操作上简单的新的引爆装置的成功经验。     

基于MATLAB的远程电机调速系统设计

详细介绍了利用MATLAB语言实现串行通信的原理和步骤,并给出了在MATLAB环境下实现远程电机调速的具体应用,实验结果表明该方案具有简单、实用、实时性能好,控制精度高等特点.     

可拓市场的类型与实现方式研究

根据可拓市场的概念，探讨了在不同可拓变换下可拓市场的类型及实现可拓市场的方式。这些研究为企业开拓市场提供了有效的形式化方法。     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

Microwave Demulsification in Removing Naphthenic Acids from Diesel Oil

Emulsification is an undesired phenomenon in the refining of highly acidic oil by alkali-washing electro-refining. In this article, a novel microwave method is applied for demulsification in the removing of naphthenic acid from diesel oil. The internal heating is attributed to molecular rotation and ionic conduction. The decrease of interface zeta-potential and the viscosity of diesel oil are responsible for the demulsification with microwave irradiation. The results exhibited that the demulsification rate is maximized when the optimum microwave irradiation power, exposure time, and irradiation pressure for Anshan and Liaohe diesel oil are deemed to be 375 W, 5/6 min and 0.05 MPa, respectively.     

Effect of the Treatment Temperature on the Surface Drying Set of Sugi Boxed-Heart Square Timber

High-temperature and controlled humidity treatment before drying has proven to be highly effective in preventing surface checks by forming drying sets in the surface layer of boxed-heart square timber in Japan. In this study, we examined the differences of the surface drying sets on sugi timber under different treatment temperatures. As a result, the width of a surface check after drying was much smaller at a treatment temperature of 120°C than at 80°C, and this indicates that the drying set with 120°C treatment would be larger than that with 80°C treatment. Also we observed that treatment temperature had a greater effect on the drying set as the drying advanced.     

状态监测与分析系统在大型机组中的应用

介绍了S8000大型旋转机械状态监测与分析系统在催化大机组中的应用及故障诊断。     

自复中调速器在高水头高转速机组上的应用

简要介绍了自复中电/机调速器的机械和电气原理，并就使用该调速器的机组在生产运行中容易出现的停机后导叶开度漂移、停机时导叶不能完全关闭和显示开度与实际开度不一致等主要问题，通过修改可编程逻辑控制器（PLC）程序、调节调零杆位置、修改PLC程序参数等方法进行解决，这些方法对同类水电厂处理类似问题有借鉴作用。