RS高强Al－Zn－Mg－Cu系合金热处理温度与性能的关系

本文系统研究了ＲＳ高强Ａｌ－Ｚｎ－Ｍｇ－Ｃｕ系合金淬火温度、时效温度与性能关系，同时还分析了合金的微观组织。试验得出在４７０℃淬火峰时效（Ｔ６）的拉伸性能达到σ_ｂ＝７４０ＭＰａ，σ_（０．２）＝７０２ＭＰａ，δ_５＝１０％；双级时（Ｔ７３）可获得σ_ｂ＝６３３ＭＰａ，σ_（０．２）＝６０６ＭＰａ，δ_５＝１１．５％。合金的弥散强化相是Ｃｏ_２Ｎ_９、Ａｌ_３Ｚｒ，沉淀强化相为ＧＰ区、η＇和η。     

微量Ag对CP276合金性能和组织的影响

研究添加不同含量的Ａｇ对ＣＰ２７６合金的拉伸性能和时效组织的影响。对拉伸强度、延伸率测试及透射电镜观察表明：０．１１ｗｔ％加入可促进Ｔ１相析出，使合金强度值升高；０．３５ｗｔ％Ａｇ的加入可在时效前期生成富Ａｇ、Ｍｇ的稳定的ＧＰ区，从而降低合金中Ｃｕ的固溶度，阻碍Ｔ１相析出，时效后期，ＧＰ区分解，生成大量Ｔ１相，使合金强度值显著升高。     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

浮基多刚体系统动力分析

引入浮体势流流固耦合理论和多刚体力学的凯恩方法对浮基多刚体系统进行动力分析。考虑入射规则波的影响和上部作业物体进行回转作业、升降作业的影响，建立了浮基多刚体系统的运动方程，讨论了浮基多刚体系统运动方程在三类情况下的求解途径。     

Apple Polyphenol Oxidase Inhibitor(s) from Common Housefly (Musca Domestica L.)

ABSTRACT: A new natural apple polyphenol oxidase (PPO) inhibitor(s) from housefly ( Musca domestica L.) was discovered. Crude inhibitor (s) isolated by buffer extraction, heat treatment, and dialysis from housefly pupae inhibited the activity of apple PPO up to 90% at pH values above 5.0. Inhibition was strictly pH-dependent. The inhibitor(s) was further characterized by employing heat, freezing and thawing, irradiation, pH adjustment, and ultrafiltration studies. The potential PPO inhibitor(s) was stable to heating at 100 °C for 1 h, repeated freezing and thawing, and irradiation. The inhibitor(s) was most stable at pH around 5.0 and least stable at alkaline pH. The PPO inhibition profile of housefly during metamorphosis also was evaluated.     

Biparametric Models for Elastic Wedge Foundation

In this paper, some biparametric models for an elastic foundation are proposed. It is assumed that the foundation has the shape of the wedge. The modeling procedure starts from the linear elasticity equations into which we introduce some simplifying assumptions based on the conceptions of decay functions. The simplified models are described by the ordinary differential equations. Stationary and nonstationary Green’s functions for the foundation considered are obtained by applying the Hankel and Laplace transform methods. An example of the interaction between the rigid plate and the elastic wedge foundation is studied.     

基于RS485总线的面粉厂集散控制系统

概述了面粉厂的基本状况及技术要求，详细介绍了面粉厂控制系统的控制方案及设计方法。给出了基于RS485总线集散控制系统的硬件配置和软件设计。系统实际应用表明，该方法为实现低成本的网络控制系统提供了一个实例。     

低乙烯含量抗冲聚丙烯的结构表征

采用二甲苯为溶剂，将不同乙烯含量（５％￣１５％质量）的抗冲聚丙烯用特定程序进行分级，将各样品分为室温下可溶于甲苯和不可溶于甲苯的两部分。使用＾１３Ｃ－ＮＭＲ方法和ＦＴ－ＩＲ方法对各组分进行表征，明确了乙烯链段在聚丙烯链上的分布，并在此基础上提出了产生这种链结构的聚合工艺的特点。     

液晶基元直接横挂于主链上的液晶共聚物的合成与研究

以含液晶基元的单体２，５－双（４－甲氧基苯甲酰氧基）苯乙与苯乙烯通过自由基共聚合反应，首次合成了一系列含液晶性和非液晶性两种序列结构的共聚物。采用ＤＳＣ、偏光显微镜和Ｘ衍射方法研究了共聚物的液晶行为，发现单体和共聚物（只有ＣＰ－５和ＣＰ－６）有很好的热致液晶性。随共聚物中介晶单体单元含量的增加，共聚物玻璃化转变温度Ｔ和热分解温度Ｔ呈规律变化。     

双环戊二烯聚合反应热力学和动力学研究

研究了ＤＣＰＤ－ＷＯＣｌ４－ＡｌＥｔ３体系前阶段的反应动力学，采用ＧＣ法分析了不同反应条件下的动力学数据，发现ｌｇ（［ＤＣＰＤ］０／［ＤＣＰＤ］）￣ｔ存在线性关系，说明该体系在前段的聚合反应为一链式反应符合二级反应模型。同时还对该体系聚合反应热力学也进行了研究；对聚合反应的ΔＨｐ、ΔＳｐ、ΔＧｐ进行了讨论。