大底盘结构地下车库基坑挖距主楼的安全距离

针对当前工程建设中的大底盘结构先进行主楼施工,再进行裙房或地下车库基坑开挖,对主楼地基安全会产生不利影响这一问题,通过太沙基地基整体剪切破坏模型,对裙房或地下车库基坑开挖距主楼的安全距离进行了探讨,以确定最佳的安全距离,保证主楼地基安全。     

浅析大直径深孔灌注桩施工技术

随着经济的发展和施工技术的进步,国内桥梁越来越多的采用了大跨径桥梁。桥桩基础也相应采用大直径的深孔灌注桩,本文以增从高速公路的增江大桥为背景工程,对大直径深桩钻孔灌注桩施工的技术进行总结。     

节理峰前剪切刚度软化模型及其影响因素分析

节理峰前剪切应力-位移曲线是研究节理剪切行为的重要内容。然而目前对于节理峰前剪切行为大多以线性描述,不能较好的描述非线性的特点。对于非线性的描述也仅仅是唯象描述剪切应力-位移曲线,未能反映影响模型的参数物理意义及影响因素。以峰前节理刚度软化行为为出发点,采用归一化的思想将节理剪切刚度与位移无量纲化,用双曲线函数表示出剪切刚度与位移之间的关系。提出了考虑刚度软化的峰前剪切本构关系,通过与试验结果对比验证了本构关系的合理性。影响该模型最重要的两个因素是初始剪切刚度与峰值剪切位移。以Greenwood和Williamson模型为基础在细观上探讨了初始剪切刚度的影响因素;抓住法向应力与节理粗糙度主要因素,探讨了影响峰值剪切位移的影响因素。对模型参数的研究有助于进一步阐明节理峰前剪切机理。     

谈基础大体积混凝土施工裂缝控制

从养护、振捣方式、外部环境等方面对基础大体积混凝土出现裂缝的原因进行了分析,并对防止基础大体积混凝土裂缝的措施作了研究,主要包括削弱水泥水热化作用、严格施工管理、做好混凝土养护工作等,以期保证工程的施工质量。     

台达20PM运动控制器在包装膜打孔机上的应用

台达20PM运动控制器及伺服驱动系统已被应用于食品包装膜打孔机。应用实例表明，采用基于非周期凸轮控制模式和CAMTABLE表的高速交流伺服驱动来代替快速气缸打孔是一种极佳的解决方案。该文简介了该打孔机控制系统的构成，着重分析了追剪和高速比较与捕捉功能这两个控制要素和部分应用程序。     

Critical Analysis of Fibre‐Reinforced Polymer Near‐Surface Mounted Double‐shear Pull‐out Tests

The study of the bond behaviour between fibre‐reinforced polymer (FRP) systems and concrete is an issue that nowadays attracts many researchers. The scientific community dedicated to the research of FRP reinforcement has been conducting numerous experimental programmes aiming to assess the local bond–slip law of the FRP–adhesive–concrete connection. This paper reports the relevant results obtained by the Structural Composite Research Group of Minho University in the scope of an international Round Robin Test. The suitability of the recommended test setup to derive a local bond constitutive law for modelling the bond behaviour of near‐surface mounted reinforcement systems is discussed based on a deep interpretation of the results.     

浮动式液压剪的结构特点及参数计算

本文结合作者的浮动式液压剪的设计、调试体会,分析了液压剪的结构组成,并对液压剪设计所需的一些重要参数进行确定。     

Highly efficient VLSI architecture for DWT with low-storage implementation

With the gradual increase in image resolution of the spacecraft camera, it is highly required to figure out the problem how to process a huge amount of image data on board at a high speed. As a solution, the CCSDS proposes a space-oriented image-coding standard. For the sake of high image-coding performance, it adopts wavelet transformation as a method of image data transformation. However, wavelet transformation contains multi-level data processing, which causes more computational time consumption and more memory utilization. In order to solve this problem, we propose a highly efficient VLSI architecture for DWT with low-storage. By revising the traditional lifting structure and employing time-multiplex data processing strategy to perform the second and third level of wavelet transformation by the same logic module, the usage of logic resource is reduced with no sacrifice on speed.Using a small amount of on-chip memory instead of off-chip memory to save certain parts of DWT coefficients and sending the coefficients in a specific sequence to entropy coder timely, the off-chip memory for storage of DWT coefficients is no longer required. The proposed VLSI architecture of DWT is already implemented on the Xilinx FPGA XC4VSX55, which can achieve a high performance, in terms of data throughput, reaching 95.91MPixels/s.     

Effects of molding conditions on injection molded direct joining using a metal with nano-structured surface

Injection molded direct joining (IMDJ) is one of the metal-plastic direct joining processes and is based on a combination of a special surface treatment of a metal piece and an insert molding. This study employed a chemical processing as the special surface treatment to form nano-structures on the metal piece. We investigated relationship between joining strengths and molding conditions; we focused on pressure of a mold cavity and injection speed as molding conditions in this work. To evaluate the IMDJ samples processed under various molding conditions, we carried out tensile-shear tests. Then we compared the results of the tests to discuss how much each condition variation affected the joining strength. From the discussion, we found an interesting effect of the injection speed, which is unique to the IMDJ using a metal piece with nano-structures. The findings of this study will promote a better understanding of the IMDJ.     

A star pattern recognition algorithm for cameras with large FOV

In most large field of view (FOV) observations, the distortion problem is inevitably and significantly more serious than in small FOV ones. In the circumstances, many traditional star identification approaches are not able to efficiently identify stars any more. In order to deal with this problem, we put forward a star identification method that is less sensitive to distortion. The method first processes stars in the central area of the image, using traditional identification logic, and then applies the region growing strategy to enlarge the identified regions iteratively until the entire image is covered. The performance of the new scheme is analysed in the presence of both simulated data and real data. The results show that the proposed algorithm has the advantage of speed, and the strategy of regional extension can efficiently identify stars in large FOV images compared with other existing algorithms.