高效乙烯聚合催化剂的制备——I．催化剂的制备规律

研究了新型含镁络合物的结构、性质及其用于制备高效乙烯聚合催化剂的制备规律。结果表明：将镁、有机醇以及不与镁发生“格式反应”的卤代烷相互作用可迅速发生反应形成新型含镁络合物溶液。该络合物在溶液中可析出结晶。具有特定的化学结构．可以均匀承载于多孔硅胶的孔隙中，负载TiCl4后制备出形态良好的球形高效乙烯集合催化剂。     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

硅胶负载磷钨酸催化合成丁酸戊酯的研究

以硅胶负载磷钨酸为催化剂研究丁酸戊酯的合成反应,确定了最佳反应条件：催化剂用量2.0/0.2 mol丁酸,醇酸摩尔比为2：1,反应时间为2 h.研究结果表明该催化剂催化效果好,反应条件温和,方法简便,酯化率可达96%,而且催化剂可重复使用.     

Synthesis and electrochemical characterization of a new Se-doped spinel material for lithium secondary batteries

A new Se-doped spinel material, LiAl_0.18Se_0.02Mn_1.8O₄ powder with a phase-pure polycrystalline was synthesized by a sol–gel method. The material in the 3 V region (2.4 3.5 V) and both the 3 and 4 V region (2.4 4.4 V) initially deliver a discharge capacity of 81 and 178 mA h g^–1 which increase with cycling to reach 110 and 204 after 50 cycles, respectively. The material shows excellent cycleability in the 4 V region (3.0 4.4 V) with almost no capacity loss. The structural integrity of the Se-doped spinel was characterized by charge–discharge cycling tests and X-;ray diffraction.     

脂质体及其应用

综述了脂质体在医药制剂、化妆品中的应用状况和前景及其典型的制备方法。     

Mn2+在Zn2SiO4中的发光

利用Sol-gel法制备掺Mn^2 的Zn2SiO4的前驱体，并将前躯体在弱氧化气氛下在1000℃煅烧2h，得到掺Mn^2 的Zn2SiO4试样。X射线衍射分析确定试样为α-Zn2SiO4晶相。荧光分析测定试样的激发光谱和发射光谱。结果显示Mn^2 掺杂的α-Zn2SiO4可发蓝色和绿色荧光，这一结果显然不同于以前的文献报道。同时，我们讨论了Mn^2 在Zn2SiO4中产生这一新型发光性质的机理。     

过氧化物交联聚乙烯的力学性能研究

采用过氧化物交联方法研究了交联聚乙烯的工艺、配方和性能，探讨了过氧化物用量对材料力学性能及凝胶含量的影响，以及炭黑、氧化锌、抗氧剂对材料性能的影响。结果表明，过氧化物交联聚乙烯的力学性能有一定的提高，随着DCP含量的增加，交联PE的凝胶含量提高，而随着凝胶含量的提高，交联PE的拉伸强度提高，断裂伸长率下降；炭黑对材料有一定的补强作用，氧化锌的加入有助于交联反应和拉伸强度的提高。     

Studies on polyacrylates containing pendant ligand with carbonyl and hydroxyl functions and their divalent metal complexes

A series of monomers were prepared by reacting (meth)acryloyl chloride with 2,4‐dihydroxybenzophenone, 2,4‐dihydroxybenzaldehyde, and 2,4‐dihydroxyacetophenone, respectively. The monomers were polymerized in dimethylformamide (DMF) at 70°C using benzoyl peroxide as an initiator. Polymer–metal complexes were obtained from DMF solutions of polymers with an aqueous solution of metal ions. The polymers and polymer–metal complexes were characterized by elemental analysis and spectral studies. The IR spectra of these complexes suggest that the metals are coordinated through the oxygen of the carbonyl group and the oxygen of the phenolic–OH group. The electronic spectra, electron paramagnetic resonance (EPR) spectra, and magnetic moments of polychelates showed an octahedral and square planar structure for Ni(II) and Cu(II) complexes, respectively. X‐ray diffraction studies revealed that polychelates are highly crystalline. The thermal and electrical properties, catalytic activity, and structure–property relationships are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2083–2090, 2003     

UHMWPE／Epoxy冻胶体系的流变行为研究

研究了环氧树脂(Epoxy)加入后对超高分子质量聚乙烯(UHMWPE)稳态表观粘度、粘流活化能以及复数模量和粘度的影响。结果表明,环氧树脂添加量低于1ω,UHMWPE／Epoxy冻胶体系的表观粘度和粘流活化能都低于空白 UHMWPE冻胶体系;当环氧树脂添加量增加至3 ω以后,冻胶体系的表观粘度和粘流活化能均比空白UHMWPE冻胶体系高。