二厘米微波衰减标准装置不确定度的验证

采用传递比较法对二厘米微波衰减标准装置不确定度进行了验证。测量标准装置的重复性以组内实验标准偏差sn(A)定量表征，测量标准装置的稳定性用组间实验标准偏差sm定量表征。     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

2.6～2.8GHz 100W硅微波脉冲功率晶体管

研究并制造了2.6～2.8GHz输出功率100W、脉宽1μs、占空比25%、增益7dB、效率35%的硅微波脉冲功率晶体管。本文介绍了该器件的设计考虑和采用的工艺技术,给出了研制结果。     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry     

微波消解-ICP-AES法测定菜油中P、S

采用微波加热,在高温高压下酸消解样品,运用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定菜油中P、S。本法选用紫外区谱线P178.221nm、S180.669nm,避免了基体中存在的Fe、Zn、Al、Cu、Mn、Ca等元素的光谱干扰。实验通过用纯氮吹扫光谱仪光路的方法消减空气中氧对紫外线的吸收,获得了足够的灵敏度。该方法简便、快速,稳定可靠,P、S检出限分别为0.067、0.078μg/ml,RSD为1.35%～5.05%,回收率为89.0%～100.9%。     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

非接触式半导体少子寿命测试方法——微波反射法

介绍了一种非接触式用于测量少子寿命的微波反射法，并与通常的光电导衰退法进行了比较。     

Ba（Mg1／3Ta2／3）O3微波陶瓷的损耗研究

本工作用ＸＲＤ，ＥＰＭＡ，ＳＥＭ等测试技术计算和示出了用不同活性粉料制备的Ｂａ（Ｍｇ１／３Ｔａ２／３）Ｏ３微波陶瓷晶格中Ｂ位离子有序度和元素的面分布情况，对它们在Ｘ面下的电行为作了探讨。实验结果表明，ＢＭＴ陶瓷的微波损耗主要与其密度有序度和微观结构的均一度有关。     

Fluorine analysis of nuclear waste glasses

A method for analyzing the fluorine content of glass using a microwave oven to digest the glass is presented. Analysis time and secondary waste generation are reduced using this method, without sacrificing accuracy.     

无源微波遥感用于地震预报的实验研究

对无源微波遥感用于地震预报在理论研究的基础上对不同岩性不同结构的岩石试件进行了加载实验，测量了岩石试件的微波辐射随载荷的变化．实验得出：岩石试件的微波辐射能量随岩石应力状态变化而显著变化；而且，不同的波段变化的幅度不同；同一波段不同极化方式的波随应力变化的变化量也不同；微波辐射能量的变化能够被卫星微波遥感探测器探测到．实验还发现，岩石试件临破裂前出现明显的微波辐射异常．