SJ-721A型调速器导叶行程变送器安装位置的改进

针对调速系统传统方法安装的导叶行程变送器存在的弊端及其对水轮发电机组调节产生的严重影响，对导叶行程变送器的安装位置及安装方法进行了改进，以提高水轮发电机组安全生产和稳定运行的可靠性。     

高速供送螺杆动态性能评价体系的建构

随着设备高速化的日益发展，传统的螺杆设计方法及相应的供送特性评价体系已显落后。参照蜗型凸轮动力学性能的评价方法，建立了高速供送螺杆的动态性能评价体系，为高速化供送螺杆的设计提供了性能参照指标。     

Does anticipation training affect drivers' risk taking?

Skill and risk taking are argued to be independent and to require different remedial programs. However, it is possible to contend that skill-based training could be associated with an increase, a decrease, or no change in risk-taking behavior. In 3 experiments, the authors examined the influence of a skill-based training program (hazard perception) on the risk-taking behavior of car drivers (using video-based driving simulations). Experiment 1 demonstrated a decrease in risk taking for novice drivers. In Experiment 2, the authors examined the possibilities that the skills training might operate through either a nonspecific reduction in risk taking or a specific improvement in hazard perception. Evidence supported the latter. These findings were replicated in a more ecological context in Experiment 3, which compared advanced and nonadvanced police drivers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

变频调速技术在污水处理厂的应用

概述污水处理厂的一般工艺，简单介绍了风机、水泵等的节能特点，介绍了变频调速装置在污水处理厂各处理工段的应用。     

变频调速技术在济钢焦化厂高压氨水泵上的应用

济钢焦化厂高压氨水泵变频调速系统采用变频器和PLC相结合的方式 ,具有调速精度高、节能等多种功能 ,保证氨水泵正常工作。全年可增加经济效益 77.3万元。     

采用注视控制器实现复杂运动的仿真

注视控制器是3DS MAX软件的众多控件之一，它能使多个物体彼此间产生运动约束。通过使用注视控制器功能，笔者成功制作出八足爬壁式仿生机械昆虫的运动场景动画，并使该仿生机械昆虫各足的行走动作符合机械零件作平面复杂运动时所应遵守的正确运动规律。由此证明，3DS MAX软件注视控制器对正确模拟特殊机械装置的复杂运动可产生极大作用。     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.     

Working Memory Capacity and the Antisaccade Task: Individual Differences in Voluntary Saccade Control.

Performance on antisaccade trials requires the inhibition of a prepotent response (i.e., don't look at the flashing cue) and the generation and execution of a correct saccade in the opposite direction. The authors attempted to further specify the role of working memory (WM) span differences in the antisaccade task. They tested high- and low-span individuals on variants of prosaccade and antisaccade trials in which an eye movement is the sole requirement. In 3 experiments, they demonstrated the importance of WM span differences in both suppression of a reflexive saccade and generation of a volitional eye movement. The results support the contention that individual differences in WM span are not exclusively due to differences in inhibition but also reflect differences in directing the focus of attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

东海盆地西南部地质特征与油气分布探讨

本文根据近3×10~4km地震和13口探井及其它地球物理、地质等方面资料,综合分析认为:东海盆地西南部与盆地其它部分在发育演化、构造运动、沉积环境等方面差异甚大。 盆地西南部(杭州湾—冲绳岛断裂以南地区)发育演化经历了断陷—坳陷—隆起—铺盖四个阶段。始新世末期的隆起在研究区演化史上有15～20Ma的沉积间断、剥蚀。这段历程,盆地其它部分未曾经历。其次是区内始新世末期抬升运动,致使始新统及以下老地层受剥蚀,仅始新统最大剥蚀量达1000m,这是盆地内绝无仅有的。第三是第三纪以海相沉积环境为主,特别在始新世,为海侵高潮,海城宽阔达8000km~2,这时盆地东北部正接受陆相沉积。研究区中部(北东向)可能存在超压泥岩及多套生油岩系,应为有利生油气区。研究区可能是盆地最有油气远景地区之一。     

厚度控制技术在中厚板轧制生产中的应用

本文探讨了影响中厚板厚度波动的因素，结合安钢中板厂2800mm轧机按合同轧制一批交货重量不大于理论重量船板的生产实践，总结了实际生产中实现高精度厚度控制的有效方法。