取向硅钢氧化膜结构对渗氮层深度的影响

摘要：低温板坯加热技术生产取向硅钢,其关键点之一在于脱碳退火后要进行渗氮处理。通过控制脱碳气氛,获得不同的氧化膜结构;并进一步分析在近似渗氮量条件下,氧化膜结构对渗氮层深度的影响。结果表明：氧化膜分为外层颗粒状氧化膜和内层层片状氧化膜两部分。随着脱碳气氛露点增加,脱碳板O含量增加,氧化膜厚度增厚、层片状氧化膜占氧化膜总厚度的比例下降,渗氮层深度增加。当层片状氧化膜厚度占比较高时,［N］原子积聚在试样的极表层,形成氮沿厚度方向的单峰分布,渗层较浅。当层片状氧化膜厚度占比较低时,［N］原子会越过该层,而在次表层再次发生积聚;从而除了极表层的氮峰外,在次表层形成一个或多个氮峰,渗层较深。     

电梯用含氮节镍奥氏体不锈钢QN1701的组织和性能

借助Thermo-Calc热力学相图计算软件,开发了用于电梯的含氮节镍奥氏体不锈钢QN1701(12Cr17Mn7Ni2Cu2N),以代替443(019Cr21CuTi)超纯铁素体不锈钢。通过OM、SEM和电化学工作站等方法研究了QN1701和443不锈钢的组织及性能。N原子起着间隙固溶和细晶强化的作用,使QN1701不锈钢的屈服强度提高至400 MPa以上,达到443不锈钢的1.32倍。QN1701不锈钢的点蚀电位为241 mV,低于443不锈钢的289 mV,但其点蚀速率为9.10 g/(m2·h),低于443不锈钢的14.58 g/(m2·h)。在电梯用研磨拉丝表面状态下,QN1701不锈钢在质量分数为10%NaCl中性盐雾和干湿循环盐雾等加速腐蚀试验中的耐蚀性能均优于443不锈钢。分析发现,443不锈钢添加一定量的Nb、Ti稳定化元素所生成的(Nb,Ti)(C,N)析出相经研磨拉丝处理后,暴露于表面或被拖拽后留下微坑,导致其耐蚀能力急剧下降。综上所述,相较443不锈钢,QN1701不锈钢具有强度更高、伸长率更大和在研磨拉丝表面状态下耐蚀性更好等特点,这对于电梯轻量化设计和长寿命具有重要价值。     

Catalytic ozonation of NH4+-N in wastewater over composite metal oxide catalyst

Large amounts of water containing-ammonium nitrogen(NH₄⁺-N)have attracted increasing attention.Catalytic ozonation technology,involving the generation of hydroxyl radical(OH)with strong oxidation ability,was originally utilized to degrade organic-containing wastewater.In this paper,Ce/MnOx composite metal oxide catalysts prepared with different preparation conditions were used to degrade wastewater containing inorganic pollutant(NH₄⁺-N).The as-prepared catalyst features were characterized using X-ray diffraction(XRD),Brunauer-Emmett-Teller method(BET),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and H₂-temperature programmed reduction(H₂-TPR)techniques.The results show that the catalyst,prepared by conditions with precipitant Na₂CO₃ and Ce/Mn molar ratio 1:2 calcined at 400℃for 3 h in pH 11.0,displays the optimal performance,with the removal rate of NH₄⁺-N and selectivity to gaseous nitrogen,88.14 wt%and 53.67 wt%,respectively.The effects of several operating factors including solution pH,initial NH₄⁺-N concentrations and scavengers were evaluated.In addition,XRD patterns of catalyst with the best performance and the comparative study on decontamination of NH₄⁺-N by various processes(O₃,catalyst and catalyst/O₃)show that the primary metal oxides are CeO₂ and MnO₂ in Ce/MnOx composite metal oxide catalysts,which have a synergistic effect on the catalytic ozonation of NH₄⁺-N,and the new phase MnO₂ plays a great role.After 5 consecutive use cycles,the degradation efficiency is declined slightly,and can still achieve better than 70 wt%over 1 h reaction.Additionally,the application of catalytic ozonation for actual wastewater on the removal rate of NH₄⁺-N was investigated.Possible mechanism and degradation pathway of NH₄⁺-N were also proposed.In a word,the application of CeO₂-MnO₂ composite metal oxide catalysts in catalytic ozonation can be regarded as an effective,feasible and promising method for the treatment of NH₄⁺-N.     

The internal nitriding behavior of Co-3Cr,Co-3Al,and Co-3Ti (a/o) over the range of 700–1100°C

Internal nitridation of Co containing 3 a/o of either Cr, Al, or Ti was studied over the range of 700–1100° C in NH₃/H₂ (694 ratio). The kinetics of thickening of the reaction zone followed the parabolic rate law, suggesting that solidstate diffusion was rate controlling. Activation energies obtained were 51.2 Kcal/molfor Co-3Cr, 46.6 Kcal/mol for Co-3Ti, and 27.9 Kcal/mol for Co-3Al. XRD showed only CrN, AlN, and TiN. Deep etching revealed that AlN formed hexagonal plates near the surface when formed at high temperature, the precipitates becoming more massive (blocky morphology) near the reaction front. TiN formed elongated dendritic precipitates, whereas CrN tended to form spheroids. The precipitate size varied with temperature, decreasing with decreasing temperature. In some cases, nitriding formed a case but no visible precipitates even at very high magnifications in the SEM. The solubility of nitrogen in cobalt was determined by long-time equilibration and subsequent chemical analyses. The diffusivity of nitrogen in cobalt was determined from measured permeabilities and the experimentally determined solubilities. Mechanisms are discussed, and the behavior of internal nitridation is compared with internal carburization and oxidation in cobalt alloys.     

Advances in the research of nitrogen containing stainless steels

The current status of nitrogen containing stainless steels at home and aboard has been introduced. The function and existing forms of nitrogen in the stainless steels, influence of nitrogen on mechanical properties and anti-corrosion properties as well as the application of nitrogen containing cast stainless steels were discussed in this paper. It is clear that nitrogen will be a potential and important alloying element in stainless steels. And Argon Oxygen Decarbonization (AOD) refining can provide an advanced manufacture process for nitrogen containing stainless steels with ultra-low- carbon and high cleanliness.     

Grinding-hardening with liquid nitrogen: Mechanisms and technology

This paper studies an innovative development of a steel grinding–hardening technology using an inert cryogen—liquid nitrogen. It was found that phase transformations took place during grinding with the application of liquid nitrogen and resulted in hardened surface layer in a ground component. The layer had a fine laths martensite structure which gave rise to a remarkably high hardness. It was also shown that the treatment can produce superior surface integrity, with compressive surface residual stresses and without surface oxidation. Due to the inert nature of the liquid nitrogen, the grinding process becomes environmentally conscious.     

水洗钽粉中氮的测定

针对水洗钽粉中杂质元素的干扰,采用EMGA-620W氧氮分析仪,测定了水洗钽粉中的氮,并与脉冲气相色谱法测氧氮(联测)进行了比较,认为该法快速、准确、可靠。     

Evaluation of two unusual high analysis compounds as fertilizers,including possible slow release features

The fertilizer potential of two unusual N-P compounds with cage structures was evaluated in pot experiments where plants were repetitively cut over 400 days. One of the compounds, hexamethyl-hexaaza-tetraphosphaadamantane (APA), having 41.6% P and 28.2% N, showed high fertilizer capability. After more than 400 days, dry matter yield of Rhodes grass given APA was 83–102% of that given conventional N-P sources, and yield of Townsville stylo 60–70%. Curves for N and P uptakes over time were of sigmoidal form, with the steepest parts between days 40 and 120, suggesting a slow-release feature. However growth was depressed up to day 40, presumably by some toxic factor associated with the decomposition of the APA. This toxicity was avoided if some conventional fertilizer was applied with the APA.The other compound, the tetrasulphide of APA (APAS) had only limited fertilizer potential. Plants did absorb P and S at least from this compound, but Townsville stylo yield was only 32–38% of that with conventional fertilizers, and Rhodes grass yield not much greater than from control pots. The possible slow-release feature, and the toxic effect, did not occur with APAS.     

天然沸石在水处理中的应用

对天然沸石的概况和性质作了简单的概括,并对国内外在利用天然沸石处理污水中的有机物、氨氮、重金属,饮用水中除氟以及沸石在滤池中的净水作用作了归纳和总结。同时,对天然沸石在水处理中的应用前景作了初步的展望。     

论新型氮肥——长效碳酸氢铵

介绍了碳酸氢铵产品的诞生、沿革及现状;论述了长效碳铵的改性机理、供肥能力、生产工艺、农用效果;揭示了长效碳铵对CO2的减排和固定效应;阐明了开发生产新型氮肥——长效碳酸氢铵对改善生态环境和服务农业的重要意义。