能量"三环节"理论在原油蒸馏装置扩能改造中的应用

中国石化扬子石化股份有限公司炼油厂在第一套常减压蒸馏装置扩能改造中，使用了多项节能技术以实现能量的优化利用。本文以标定数据为基础，运用能量“三环节”理论对该装置的用能状况进行了计算和分析，从能量利用角度对装置的扩能改造效果进行了评价，并为装置的进一步优化能量利用提出了相应措施。     

撞击流管式反应制备超细氧化锆粉体

我国氧化锆粉体产业目前基本上“精进粗出”，迫切需要开发氧化锆粉体备新工艺，特别是具有高附加值的纳米氧化锆粉体制备技术，液相反应沉淀法具有成本低，易于工业化等优点而成为研究的热点。本文采用撞击流管式反应新工艺，撞击流接触反应强化了过程的微观混合。实现了均匀成核，使得成核过程易于控制，而管式反应器的独特设计克服了返混，因而使得反应沉淀过程易于控制，粒子分布窄。用该工艺结合醇热处理表面改性制备的超细氧化锆粉体。平均粒径约为14nm，粒度分布窄并无硬团聚发生。该方法过程简单，易于工业化大生产。     

掺杂聚苯胺的表面接枝共聚改性

化学氧化法制备的聚苯胺表面的亲水性差，本文在本征态和不同酸掺杂志聚苯胺的表面上接枝共聚丙烯丙烯酸和丙烯酰胺，明显地改善了聚苯胺的表面亲水性。结果显示，聚苯胺表面经过等离子体处理后，有利于丙烯酸和丙烯酰胺在聚苯胺表面上的接枝共聚，随着接枝量增多，导电率则随之有所下降，此外，利用ＳＥＭ和反射ＩＲ表征了改性反聚苯胺表面的形态和结构。     

新型电潜螺杆泵减速器齿轮干涉问题的研究

为保证齿轮设计的正确性，介绍了新型电潜螺杆泵减速器齿轮传动中存在的各种干涉现象及产生的原因和避免的条件，通过分析计算给出了避免各种干涉的变位系数的取值范围和措施。     

桥用高性能混凝土的徐变与应用

基于2座桥梁混凝土徐变的试验结果，论述了高性能混凝土的长期变形特征，指出对提高混凝土弹性模量、减少徐变收缩的水泥、外加剂和骨料的三要素中，骨料的作用最明显．提出了徐变的湿度、尺寸修正方法与计算式，探讨了掺筋混凝土的徐变修正、徐变行为的温度效应及长期徐变等．     

Hydrothermal synthesis and in situ surface modification of boehmite nanoparticles in supercritical water

In situ surface modification of boehmite (AlOOH) nanoparticles during hydrothermal synthesis in supercritical water was examined by adding CH₃(CH₂)₄CHO and CH₃(CH₂)₅NH₂ as modifier reagents to the reactants. Changes in surface properties of the nanoparticles by surface modification was observed by FTIR, dispersion in solvents and TEM analyses, which demonstrated that reagents chemically binded onto the surface of the AlOOH nanoparticles. The results of SEM and TEM pictures show that the surface modification affects crystal growth and reduces the particle size and changes the morphology of the particles.     

测定地下水流向的多计数管探头的研制

多计数管流向探头;;单孔;;总流向;;局部流向;;滤水管 掌握地下水的流动方向,有助于研究地下水的运动规律。利用放射性单孔法可以测定地下水流某一点流动方向。 应用放射性指示剂在单孔中测定地下水流向的方法由奥地利的梅尔霍费于1963年首先提出,1964年波兰的鲍劳斯齐克等把这种方法用于现场测量。放射性单孔流向测量方法有若干种,其原理基本相同,仅测量装置结构有区别,早期有单管旋转式探头。我们从1983年7月     

New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.     

国有企业党风廉政建设中的问题及治理研究

剖析国有企业党风廉政建设中的突出问题。提出“推进国有企业党风廉政建设运用市场经济原则经营运作是重要途径;加强对企业经营管理者的监督管理是关键;完善法人治理结构、建立企业内部权力制衡机制是重要基础”的观点。