降低雷达接收机中噪声的几种方法

噪声是影响雷达接收机灵敏度的重要因素。本文通过讨论雷达接收机噪声的来源，分析并提出了集中降低雷达接收机内部和外部噪声的几种方法，具有一定的实际意义。     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

Wavelet based Denial-of-Service detection

Network Denial-of-Service (DoS) attacks that disable network services by flooding them with spurious packets are on the rise. Criminals with large networks (botnets) of compromised nodes (zombies) use the threat of DoS attacks to extort legitimate companies. To fight these threats and ensure network reliability, early detection of these attacks is critical. Many methods have been developed with limited success to date. This paper presents an approach that identifies change points in the time series of network packet arrival rates. The proposed process has two stages: (i) statistical analysis that finds the rate of increase of network traffic, and (ii) wavelet analysis of the network statistics that quickly detects the sudden increases in packet arrival rates characteristic of botnet attacks.Most intrusion detections are tested using data sets from special security testing configurations, which leads to unacceptable false positive rates being found when they are used in the real world. We test our approach using data from both network simulations and a large operational network. The true and false positive detection rates are determined for both data sets, and receiver operating curves use these rates to find optimal parameters for our approach. Evaluation using operational data proves the effectiveness of our approach.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

Ultrahigh-performance FFTs for the CRAY-2 and CRAY Y-MP supercomputers

In this paper a set of techniques for improving the performance of the fast Fourier transform (FFT) algorithm on modern vector-oriented supercomputers is presented. Single-processor FFT implementations based on these techniques are developed for the CRAY-2 and the CRAY Y-MP, and it is shown that they achieve higher performance than previously measured on these machines. The techniques include (1) using gather/scatter operations to maintain optimum length vectors throughout all stages of small-to medium-sized FFTs, (2) using efficient radix-8 and radix-16 inner loops, which allow a large number of vector loads/stores to be overlapped, and (3) prefetching twiddle factors as vectors so that on the CRAY-2 they can later be fetched from local memory in parallel with common memory accesses. Performance results for Fortran implementations using these techniques demonstrate that they are faster than Cray's library FFT routine CFFT2. The actual speedups obtained, which depend on the size of the FFT being computed and the supercomputer being used, range from about 5 to over 300%.     

红外警戒系统作战环境的计算机仿真

文中论述了红外警戒系统视景仿真研究的主要内容，给出了仿真软件流程。探讨了满足红外警戒系统全方位、多目标视景生成的实时性方法。     

Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.     

DC-DC电荷泵的研究与设计

以Dickson电荷泵的基本原理为出发点，研究了一种将正电压输入转为负电压输出的开关电容电路。由于开关电容的充放电特点，为确定电容时间常数，采用非交叠时钟控制信号避免了由于时钟交叠而造成的当电容充电还未完成即对下一级电容进行放电的现象。同时，参考功率MOS-FET的电容模型通过增大驱动电路的电流减小了开关管的上升延时，提高了开关动作的速度，使转换效率得到明显提高。此电路结构简单，性能优良，易于集成，可广泛应用于输出负电压的电源产品中。     

估计小波系数方差邻域大小的研究

利用小波变换去噪时小波系数方差的估计对去噪结果影响很大。自然图像小波分解后得到的系数在不同的分辨率中差异很大,所以利用邻域估计中心点方差时,不同分辨率应有不同大小的邻域。首先对在邻域中利用极大似然准则估计中心点方差进行分析,再结合自然图像小波分解后的系数在不同分辨率子带中,根据平稳性和重要性选择邻域的大小。最后进行去噪实验,并取得正交小波分解下理想的去噪性能。     

红外半导体激光光镊的实验研究

激光光镊技术是一项在许多科学领域有广阔应用前景的技术。本文详细给出构建一台红外半导体激光光镊的设计思想及实例。由于采用了独特的对大功率多模红外激光选模整形和双透镜陷阱操纵技术等性能价格最优化选择 ,该系统易于构建 ,陷阱操作方便 ,其构建价格仅一般光镊的几十分之一 ,非常适合光镊技术的推广和一般实验室构建