端面密封条件下钢管静水压试验压力的确定

着重从力学性能和材料方面分析了螺旋埋弧焊管在端面密封条件下进行水压试验时发生变形的主要原因,提出了高钢级钢管在高压力下采用端面密封水压试验时水压值确定的原则.指出静水压试验压力应按照API SPEC 5L<管线钢管规范>4.3.3附录K计算值确定.     

饮水沟堆积体抢险加固工程监测成果及预警分析

根据饮水沟堆积体边坡变形特征,采用数学模型对边坡稳定性进行了综合预测分析,及时提出边坡异常变形的预警;结合开挖、降雨、排水以及加固处理等因素,对监测成果进行分析,论证边坡变形机理,实时分析抢险加固效果,为制定抢险方案以及调整加固参数、优化施工组织和加快工程进度等提供了科学依据,是成功预警并高效治理大规模变形体边坡的典型工程案例,可供类似工程参考。     

无线监测示功仪的研制与应用

针对常规示功仪资料储存的容量有限和对油井不能长时间连续监测的不足,研制了无线监测示功仪。该示功仪将载荷和位移传感器、无线传输以及太阳能供电等多种技术集于一体(1)采用加速度传感器,实现了光杆无线位移检测,解决了常规位移传感器寿命短、可靠性差的问题;(2)应用CC1000无线模块,实现了油井示功图短距离数据无线交换,屏弃了常规仪器电缆通讯的方式;(3)通过增加仪器储存容量和移植USB接口,解决了常规示功仪储存数据量少的问题,极大地方便了数据交换;(4)将太阳能电池与充电电池有机结合,圆满解决了仪器供电问题。     

A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

A Revised Methodology for Research on Metamemory: Pre-judgment Recall And Monitoring (PRAM).

A revised methodology is described for research on metacognitive monitoring, especially judgments of learning (JOLs), to investigate psychological processing that previously has been only hypothetical and unobservable. During data collection a new stage of recall occurs just prior to the JOL, so that during data analysis the items can be partitioned into subcategories to measure the degree of JOL accuracy in ways that are more analytic than was previously possible. A weighted-average combinatorial rule allows the component measures of JOL accuracy to be combined into the usual overall measure of metacognitive accuracy. An example using the revised methodology offers a new explanation for the delayed-JOL effect, in which delayed JOLs are more accurate than immediate JOLs for predicting recall. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

多孔板体结构足尺性能分析及材料基本要求

本文就利用诸如蛋白石这样的疏松多孔矿料同灰土构成的混合料，在路面结构中表现出的独特有效的抗冻作用机理作了深入分析，并结合足尺试验数据加以验证。阐述了所谓多孔板体结构的概念、机制和材料组成要求。     

Process monitoring using auto-associative,feed-forward artificial neural networks

The potential of using artificially simulated neural networks as intelligent, adaptive process-monitoring devices is discussed. The investigation is considered as a method for automatic, intelligent exception reporting for quality control applications. The technique is also compared with the conventional statistical approaches of principal component analysis and Kohonen's feature map. The applications of the technique in aerospace and manufacturing environments are presented and a possible extension of the method to incorporate a diagnostic function is discussed.Seconded from Cheltenham and Gloucester College of Higher Education as a Royal Society/SERC Research Fellow at Smith's Industries Aerospace and Defence Systems, Bishop's Cleeve, Cheltenham, UK.     

新一代厂站计算机监控系统软件的研制

本介绍一种新的基于开放系统环境的计算机监控系统软件的开发研究及其设计目标、实现方法及应用情况。     

粗粒土渗透变形机制浅析

对砂卵砾石的渗透变形的形成条件进行了简要分析，在此基础上对渗透变形的形式进行了简要评价，并提出了渗透变形临界坡降的计算方法。     

A new monitoring system for piping systems in fossil fired power plants

A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:

1. 1. the inclusion of creep relaxation

2. 2. the inclusion of external loads on components

3. 3. a more accurate method of calculating thermal stresses due to temperature transients

4. 4. the inclusion of high cycle fatigue terms.

The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.

The site testing provided good practical experience and showed up problems which would not otherwise have been detected.