抽余C_4烃中异丁烯催化逆流水合制叔丁醇

采用大颗粒离子交换树脂催化剂,在φ100mm×10m的反应器中进行了异丁烯催化逆流水合制叔丁醇的中间试验。考察了反应温度、水油体积比和抽余C4烃的流速等对异丁烯转化率的影响。试验结果表明,异丁烯催化逆流水合制叔丁醇的适宜操作条件为:反应温度80~90℃,水油体积比为4~5,抽余C4烃的流速为0.45~0.55mm/s。在此条件下,异丁烯的转化率可达88.8%。工业装置运转结果表明,异丁烯转化率大于75%。     

NdFeB水磁体表面离子镀Cu-Al-In三元仿金

分析了真空离子镀的基本原理，研究了NbFeB永磁合金表面离子镀Cu－Al-In三元仿金合金的新工艺。合金镀层晶粒较小，均匀美观，光泽柔和；合理的工艺条件为：偏压200V，主弧电流5A±0．25A，间距120mm，加热功率11kW，氩气分压1．33Pa～0．0133Pa，时间30min。     

内热式液态合金离子源

本文介绍了一种实用的液态合金离子源结构，我们利用本结构研制成功了Ａｕ－Ｓｉ和Ａｕ－Ｓｉ－Ｂｅ液态合金离子源，测出了它们的发射特性。     

Macroscopic model for multispecies ion-exchange kinetics

A model for multispecies ion-exchange kinetics based on the Nernst-Planck equation is suggested. It is analyzed in comparison with the “locally-determinate” model described by Hwang and Helfferich [1]. The model makes possible simple computation. The conditions for the occurrence of unusual kinetic curves with a maximum are clarified. The proposed model is developed for different types of kinetic problems and verified by the experimental investigation of a kinetics in ternary systems.     

离子注入硅的线源非相干光瞬时退火温度计算

本文利用高温模型,计算了在我们的实验条件下对离子注入硅进行线源非相干光瞬时退火的退火温度,并与实验结果比较,两者符合得较好。     

A ctivation measurement of neutron distribution in intermediate energy heavy ion target area

The distribution of neutrons produced by the reaction of 50MeV/u ^12C-ion on a thick Cu target are studied.The neutrons are measured with threshold activation detectors.Al.F,C,Al and In activation samples were used to measure neutrons with energy greater than 7,11,20,50MeV and thermal neutrons,respectively,The fluence rate,energy and angular distributions of neutrons,total neutron yield of 12C-ion and the emission rate in the forward direction of neutrons over 11 and 20MeV were obtained.     

等离子体聚合有机膜的离子注入改性

以苯胺为单体在等离子体条件下进行聚合，测量所合成的有机膜经１００ｋｅＶ、５×１０１５ｃｍ￣（－２）Ａｒ￣＋注入后电阻率的变化，并用ＦＴＩＲ、ＸＰＳ和核分析方法对离子注入引起的结构和成分改变进行了探讨。结果表明，在等离子体环境下，聚合膜内仍含有大量环结构。由于Ａｒ￣＋的注入，聚合膜表面损伤而碳化，使注入层内的体电阻率降低１１个数量级。     

As离子注入形成硅化钨的研究

大规模集成电路的发展使集成度不断提高,器件尺寸减小,线条变窄。现常用的多晶硅栅和互连,由于电阻率高,限制了集成电路的速度。近年发展起来的硅化物材料,因其电阻率低、稳定性好、自对准性能好而常被用作大规模集成电路中的欧姆接触,互连和肖特基势垒。     

固氟氯化铵焙烧法从包头稀土矿中回收稀土的动力学

研究了固氟氯化铵焙烧法分解包头混合型稀土精矿回收稀土的动力学.结果表明:固氟焙砂的氯化反应过程符合Bagdasarym提出的区域反应速率模型,氯化反应过程经过了两个串联反应步骤,且反应生成物的核按一个方向长大;反应速率方程遵从Erofeev方程的串联反应步骤模型,反应表观活化能Ea为36.831 KJ·mol-1,过程控制步骤是内扩散控制.     

Ammonium Accumulation Caused by Reduced Tonoplast V-ATPase Activity in Arabidopsis thaliana

Plant vacuoles are unique compartments that play a critical role in plant growth and development. The vacuolar H⁺-ATPase (V-ATPase), together with the vacuolar H⁺-pyrophosphatase (V-PPase), generates the proton motive force that regulates multiple cell functions and impacts all aspects of plant life. We investigated the effect of V-ATPase activity in the vacuole on plant growth and development. We used an Arabidopsis thaliana (L.) Heynh. double mutant, vha-a2 vha-a3, which lacks two tonoplast-localized isoforms of the membrane-integral V-ATPase subunit VHA-a. The mutant is viable but exhibits impaired growth and leaf chlorosis. Nitrate assimilation led to excessive ammonium accumulation in the shoot and lower nitrogen uptake, which exacerbated growth retardation of vha-a2 vha-a3. Ion homeostasis was disturbed in plants with missing VHA-a2 and VHA-a3 genes, which might be related to limited growth. The reduced growth and excessive ammonium accumulation of the double mutant was alleviated by potassium supplementation. Our results demonstrate that plants lacking the two tonoplast-localized subunits of V-ATPase can be viable, although with defective growth caused by multiple factors, which can be alleviated by adding potassium. This study provided a new insight into the relationship between V-ATPase, growth, and ammonium accumulation, and revealed the role of potassium in mitigating ammonium toxicity.