尾矿堆场对地下水及其水质影响的联合模拟研究

矿产资源开发利用后的废弃物堆场常处水文地质条件复杂、区域内外边界不规整的地带。为了客观评价堆场渗漏对地下水及其水质的影响,本文提出了适宜于复杂水文地质条件、复杂内外边界条件的地下水与地下水中污染物分布规律联合模拟分析的非构造网格FVM数值模型,通过在某化工行业尾矿堆场渗漏评价的具体应用,取得了很满意的结果。     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

川东北板东地区长兴组生物礁型储层研究

四川盆地东北部板东地区长兴组地层主要由含生物(屑)灰岩-生物(屑)灰岩、礁灰岩、泥-粉晶白云岩和细-中晶白云岩构成,其中以细-中晶白云岩的储集性能最好。以礁顶部测井曲线变化特征为依据,认为该礁至少是由3个旋回叠加而成。成岩作用中对储层影响最大主要是胶结充填作用、白云石化作用、溶蚀作用。经镜下观察认为胶结充填作用分3期,充填了大部分的原生孔隙;混合水云化作用使生物屑灰岩演变成具或不具生物(屑)残余结构的细—中晶白云岩;溶蚀作用形成的晶间溶孔、不规则溶孔、溶洞构成了生物礁主要储集空间。     

小型密闭压力容器测试系统重复性的研究

小型密闭压力容器测试（MCPVT）法是安全工程领域中近几年发展起来的、评价有机过氧化物及自反应物质受热分解反应激烈程度的新方法。pmax是MCPVT方法中用来表征自反应物质受热分解反应激烈程度的物理量之一。文中通过大量实验，研究了样品容器容积V、升温速率R及样品质量M对pmax重复性误差的影响，研究了一系列典型的有机过氧化物和自反应物质在标准实验条件下pmax重复性误差。结果表明，小型密闭压力容器测试系统重复性好，测试结果可靠，从而为MCPVT法最终成为国际上评价自反应物质受热分解反应激烈程度标准方法奠定了基础。     

用于铜的化学机械抛光液的研究

文中介绍了一种以碱性抛光液对铜进行全局平面化的方法 ,讨论了以 Si O2 水溶胶为磨料的抛光液在Cu-CMP过程中的化学 (络合 )作用及反应机理 ,并给出了抛光液的配比及上机实验结果。结果表明 :该抛光液用于对带有阻挡层和介质层的铜抛光 ,达到了对铜层的高去除速率和高选择比 ,取得了较好的全局平面化效果     

Hysys软件在分析精丙烯硫化物来源中的应用

气体分馏装置原料液化石油气 (LPG)中有机硫化物形态复杂 ,考察分析工业装置精丙烯硫化物含量变化难度大。利用Hysys模拟 ,分析判断LPG中小分子有机硫化物在气体分馏产品的分布并提出了控制措施。考虑操作条件对精丙烯硫含量的影响 ,并对工业装置精丙烯总硫超标原因进行了分析。     

迅速发展的有机电致发光(OEL)显示器件

有机电致发光显示器件以其全固体、自发光、宽视角、高对比、快响应、低功耗、更轻薄等比液晶显示器件更为优越的特性 ,在小尺寸平板显示市场上正开始向 LCD挑战     

值得关注的有机光伏电池材料

评述了近十年来有机光电池材料研究的最新进展，强调了材料复合对设计有机光伏电池的重要性，指出了有机半导体材料的分子聚集态结构与材料凝聚态结构的调控在改善器件性能上发挥的决定性作用，揭示了激发态过程与激发态性质的研究在提高光电转换效率上的意义，分析了有机光电池材料的发展前景。     

低压宽温高频铝电解电容器工作电解液

在传统的己二酸铵/乙二醇加水体系中,通过增加水的含量实现高电导率,同时在电解液中添加多种有机高分子物质形成复合添加剂,改善工作电解液的高温稳定性,使电容器上限工作温度扩展到105℃,形成高频宽温低阻抗工作电解液。     

Facile optical resolution of amino acid esters via hydrolysis by an industrial enzyme in organic solvents

Racemic amino acid esters were optically resolved via hydrolysis in organic solvents by the catalysis of an industrial alkaline protease, “Alcalase”. The products which were composed mainly of L-amino acids were insoluble and easily separated by filtration. The activity of the enzyme and enantiomeric excess of the products were significantly dependent on the nature of solvent and the water content in the reaction media. Generally, high values of enantiomeric excess were obtained at low water contents. Many natural and unnatural amino acids were resolved by this method.