State of the Art Treatment of Non-Ferrous Castings 3-in-1 Heat Treatment Systems Combine Foundry Processes

The interior of a high-pressure die-casting is of an unsatisfactory quality. Engine blocks made with this die casting process show lower specific engine performance. Pressure die-casting can hardly be heat treated for obvious reasons PSM (Precision Sand Molds) process uses sand and organic binder to generate a mold and even allows the manufacturing of complex diesel engine blocks in aluminum alloys. Combined technologies are available for semi-permanent mold castings with cores and castings made in Precision Sand Molds with organic binders. Castings are placed into the special heat treatment furnace immediately after pouting without the operations in stand alone machinery. This patented Sand Lion^R 3-in-1 technology processes hot castings and carries out three (3) foundry processes simultaneously in one (1) automated machine: 1) De-coring and sand removal; 2) Thermal sand reclamation; 3) Solution heat treatment of castings. The combination of several main casting processes is reflected in significant reductions of energy consumption, of production costs, and improving the quality of the castings. Audits in foundries using the 3-in-1 process showed an average reduction in production costs of more than 30%.     

凸轮轴激冷面气孔成因及防止方法的探讨

详细分析了神龙富康轿车冷硬铸铁凸轮轴激冷面气孔产生的部位和原因，从控制原材料、加强型腔排气、改进浇注系统、加强冷铁质量管理等方面采取措施，使激冷面气孔明显减少。     

中国铸造新技术发展趋势

在评介工业发达国家铸造技术发展现状和中国大陆铸造技术发展现状的基础上,从铸造合金材料、铸造原辅材料、铸造合金熔炼、砂型铸造、特种铸造、铸件质量保障和铸造信息化七个方面概括描述了近期可以看到的中国大陆铸造技术的发展趋势.     

铸造用高强度改性酚醛树脂的研究

叙述了改性酚醛树脂的性能、覆膜砂制备配方及其性能测定.改性后的酚醛树脂韧性增强,覆膜砂抗拉强度和抗弯强度明显提高,型砂的溃散性得到了改善.     

自动造型线型砂性能要求及其控制

在自动造型生产线生产过程中,型砂性能对铸件质量具有决定性的影响,型砂性能控制是保证铸件质量的重要工艺手段。合理选择原砂、膨润土、煤粉等原辅材料,控制好型砂的水分、紧实率、透气性、湿压强度、含泥量及有效膨润土含量、挥发份、灼减量和旧砂温度、旧砂水分等是自动造型生产线型砂性能控制的关键。应确定合适的型砂各项性能指标、控制参数和控制方法,严格型砂混制的工艺过程,保证自动造型生产线正常运行,充分发挥自动造型生产线的优越性。稳定了型砂性能,就为获得良好的铸件成品率提供了保障。     

铁型覆砂铸造球墨铸铁曲轴

介绍了铁型覆砂铸造球墨铸铁曲轴的工艺,并就推广应用中发现的铸造缺陷提出了防止措施.     

一种新型湿型砂质量综合评定系统的研究

为了同时快速获得表征湿型砂质量的主要性能和组分参数，研制了一种多工位湿型砂质晕测试系统，该系统主要由自动制样与测试机构、气动控制回路、单片机测控单元及PC机等四大部分构成幽测试的型砂质基参数包括紧实率、透气性、温度、综合强度、含水量及有效粘土含量。文中主要介绍了系统机械结构设计。单片机测控单元软硬件设计及PC机管理软件设计方法，并给出了应用该系统的实测结果。     

带包类后桥壳的铸造技术

介绍带包类球墨铸铁后桥壳铸件的生产工艺.通过合理熔炼、造型、制芯及铸造工艺参数,采用冲天炉熔炼,手工造型制芯,实现批量生产优质带包类桥壳球铁件.     

树脂砂造型生产线的改造

从现今树脂砂技术及设备的状况出发,紧密结合生产实际状况,进行整体改造方案的设计、设备的选型、调试及相关工艺的改进等工作.从目前的使用状况来看,改造基本达到了预期的目的.     

Discussion on compact mechanism of air-stream and synchro-formed clamp plate impact molding

1 .Introduction Due to many advantages such as simple molding machine structure high compact compaction of sand mold, speed and well-distributed the air-stream impact molding method However, has been extensively used in production.when this molding method is applied to mold complicated pattern with wider top surface and deep