超高分子量聚乙烯衬板在煤仓中的应用

介绍了井底煤仓溜煤斜面采用超高分子量聚乙烯衬板安装及应用情况 ,对井底煤仓棚煤原因及解决办法进行了探讨     

VERIFICATION AND COMPARISON OF FORMULAS FOR BED LOAD TRANSPORT

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｂｅｄｌｏａｄｔｒａｎｓｐｏｒｔｈａｓｂｅｅｎｅｘｔｅｎｓｉｖｅｌｙｓｔｕｄｉｅｄｉｎｔｈｅｐａｓｔｆｅｗｄｅｃａｄｅｓａｎｄｍａｎｙｆｏｒｍｕｌａｓｆｏｒｐｒｅｄｉｃｔｉｎｇｂｅｄｌｏａｄｔｒａｎｓｐｏｒｔｒａｔｅｈａｖｅｂｅｅｎｐｒｅｓｅｎｔｅｄ(Ｅｉｎｓｔｅｉｎ 1950 ;Ｍｅｙｅｒ Ｐｅｔｅｒ 194 8;Ｂａｇｎｏｌｄ 1973;Ｅｎｇｅｌｕｎｄ 1976;Ｙａｌｉｎ 1972 ;Ｓａｍａｇａ 1986;ａｎｄＫａｒｉｍ 1998) .Ｗｈｅｎａｐｐｌｉｅｄｔｏｓｔｒｅａｍｓｗｉｔｈｐａｒｔｉａｌ…     

库车坳陷煤生物标志物组成随成熟度的变化特征

对塔里木盆地库车坳陷三叠系和侏罗系的11个岩心与露头煤样的地球化学分析表明，煤的生物标志物组成随演化程度的增加而有规律的变化：成熟早期（镜质组反射率Ro／1．0％）煤的生物标志物组成反映了沉积环境和生源的特征；成熟晚期（1．10％＜Ro＜1．30％）煤的生物标志物特征受成熟度的控制作用十分明显，生物标志物参数随Ro的增大而增加或减小；高－过成熟阶段（Ro＞1．30％)所有煤样的生物标志物组成已基本趋于一致，而且和湖相泥岩的生物标志物特征相似，该阶段的生物标志物参数不能用来进行油源对比。     

Large-scale cooling towers as part of an efficient and cleaner energy generating technology

The present paper will outline the main aspects of the design and construction of cooling towers in Germany in the last decade. As part of electricity generating power plants, cooling towers play a significant role for the availability of reliable energy supplies, in a manner compatible with environmental requirements. They definitely belong to the largest and thinnest concrete structures at present. Because of the combined action of wind, thermal and moisture effects, special care has to be taken with regard to fatigue, cracking and corrosion to ensure an adequate level of safety and durability. Such a design strategy has been employed for the world’s tallest cooling tower at the Niederaussem power plant in Germany, with an overall height of 200 m and thickness values of 22–24 cm. Special considerations included the realistic non-axisymmetric distribution of soil characteristics, wind action due to interference effects (as determined by wind-tunnel tests), optimisation of the shell shape to improve structural and dynamic behaviour, injection of the cleaned flue-gas into the cooling tower, and the use of high-performance concrete (85 MPa) to improve shell resistance against acid attack by the cleaned flue-gas. The paper will present some results of an actual research project on this problem, which was conducted at the University of Wuppertal, to explore the use of high-performance concrete on design, stability and durability of cooling tower shells.     

码头建筑物对水位影响的模型试验及计算方法

河岸码头建筑物势必导致其上游水位壅高及对码头附近水流流态产生影响。以汉江沙洋河段为对象 ,通过定床概化物理模型试验研究了码头建筑物对河道水位与流速场的影响。并基于能量平衡原理 ,采用河道恒定非均匀流水面曲线基本方程 ,结合物理模型试验资料 ,计算了码头建筑物附近的水位变化值 ,并提出了码头建筑物产生的水位壅高值的计算方法。     

甲烷氧化偶联中钙钛矿催化膜的研究进展

甲烷氧化偶联对充分利用天然气资源具有非常重要的意义 ,以钙钛矿催化膜为核心的催化技术最有希望实现这一过程的工业化。本文介绍了近几年来人们对钙钛矿催化膜的研究成果 ,指出了这一领域今后的发展重点。     

DRYING OF GRANULAR PARTICLES IN A MULTISTAGE INCLINED FLUIDIZED BED WITH MECHANICAL VIBRATION

A mathematical model for the drying rate of granular particles in a multistage inclined fluidized bed(IFB) is presented from the standpoint of simultaneous heat and mass transfer, with taking the effect of mechanical vibration added vertically into consideration.

Steady-state distributions for the temperatures and concentrations of the particles and the heating gas, and for the moisture content of the particles are numerically calculated based on the present model. The calculated results show fairly good agreement with the experimental data, which were obtained from the drying experiments of brick particles in a three-stage IFB using comparatively low temperature air(40-60°C) as the heating gas.

It has been found within the range of the experimental conditions employed that, the mechanical vibration added vertically enhances the over-all drying rate of the particles and its effect can be considered equivalent to an increase in the air velocity.     

采用轴径向技术有效解决固定床反应器阻力降的快速升高

讨论了固定床反应器阻力降快速升高的原因，介绍了用轴径向技术解决这一问题的原理及优点，及其在铁铬系变换催化剂和钴钼系耐硫变换催化剂反应器中的实际应用。     

深孔松动爆破提高瓦斯抽放率的应用研究

本文探讨了深孔松动爆破孔和瓦斯抽放孔的布置参数及工艺等 ,并设计了实施方案。在潘一矿的应用试验表明 ,用深孔松动爆破技术来提高低透气性煤层的瓦斯抽放效果 ,是一条很好的途径。     

活性炭中甲烷水合物的生成动力学

在温度275．75－279．95K和压力5．6－9．6MPa的静置条件下，测定了14组甲烷水合物在活性炭中的生成动力学数据（压力－时间关系），分析了甲烷水合物在活性炭中生成的物理过程，结合边界层理论和结晶学原理，提出了单液膜传质控制机理的生成动力学模型，并求得了解析解,使用Levenberg-Marquardt方法拟合模型参数，模型预测值与实验值符合良好。