应用粒子动态分析仪研究水力旋流器流场

利用粒子动态分析仪(PDA),对水力旋流器内固相颗粒流场做了全面的测定,得出水力旋流器内固相颗粒的流态、浓度及粒度分布,为进一步查清水力旋流器的工作机理提供了重要理论依据。     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

微型无阀泵参数化结构设计及测试

 从理论计算和试验两方面研究了用于微流控化学分析芯片的微型无阀泵流动特性，初步建立了微型无阀泵流道结构的数学模型，重点讨论了结构参数的选取原则及相应的流动阻尼系数的计算方法． 通过试验验证了数值计算的可靠性，为微型无阀泵参数化设计及优化提供了理论依据及经验曲线．     

考虑变质量湍流影响的水平井流入动态分析

在水平井生产过程中,井筒内管流与地层渗流互相制约、互相影响、互为边界条件,从而构成了一个完整的水动力学体系。根据水平井生产时井筒内管流与油藏的相互作用关系,建立了水平井筒存在压力梯度的变质量湍流与地层渗流的耦合计算新方法。关于井筒内流的计算;应用了经典的k_εM湍流模型,关于地层的渗流计算,采用了有限元法。通过耦合模拟获得了井筒内湍流场流速分布及总压能损耗的规律,根据耦合模拟计算结果绘出了较为准确的水平井流入动态曲线。该计算方法为描述水平井流入动态、评价水平井产能、确定合理生产制度提供了可靠的手段.     

对油气运聚研究中一些概念的再思考

非均质地层中烃类的扩散流和达西流可以同时存在，并可相互转换。据Welte等1997年计算，在致密泥岩层中，扩散流和达西流的流速分别为18m／Ma和15m／Ma，说明在致密地层中这两种流动几乎没有差别，同时说明了泥岩中的流动也可以用达西公式来表述。油、气的浮动和渗流虽然都是在地下多孔介质中的流动，但前者是油、气在水中上浮，不呈连续相流动，而后者是油、气呈连续相与水一起流动，因此浮力没有含烃饱和度的相对渗透率的要求，也不能用达西的密度差，浮力流是二交运移最基本的流动式。地下确实存在油、气的幕式运多和幕式以注，但幕式是一个有时间尺度的概念。油、气的运移和聚集是一个带莫式特征的连续过程，不能只强调强度较大的幕式活动而忽视了连续过程的存在，再加上油源的不稳定和通道的非均质性，因此单依据流体包裹体的分析就确定油气藏是由2或3期充注所形成，似乎有些难以置信。     

低速非线性渗流试井分析理论研究

低渗透油气藏存在不符合达西定律的渗流，从大量实验和产生低速非达西渗流的影响因素分析，低渗透油气藏确定存在启动压力。鉴于此，提出了准确描述含启动压力梯度非达西渗流的试井分析数学模型及模型的解，研究制作了非达西渗流的内、外边界条件下的典型样板曲线，该样板曲线对试井分析解释提供了可靠的帮助，为正确认识和研究低渗透油气藏的特殊规律提供了一个好的方法。     

CMF300M355NU型质量流量计在油库汽车装车中的应用

介绍了质量流量计的工作原理有应用效果。这种新型质量流量计精度高，稳定性好，示值计量简便，可直接显示质量、流量、介质温度、密度等，维护量低，但必须正确安装、使用，才能发挥其应有的作用。     

Theoretical analysis of heat transfer in laminar pulsating flow

Pulsation effect on heat transfer in laminar incompressible flow, which led to contradictory results in previous studies, is theoretically investigated in this work starting from basic principles in an attempt to eliminate existing confusion at various levels. First, the analytical solution of the fully developed thermal and hydraulic profiles under constant wall heat flux is obtained. It eliminates the confusion resulting from a previously published erroneous solution. The physical implications of the solution are discussed. Also, a new time average heat transfer coefficient for pulsating flow is carefully defined such as to produce results that are both useful from the engineering point of view, and compliant with the energy balance. This rationally derived average is compared with intuitive averages used in the literature. New results are numerically obtained for the thermally developing region with a fully developed velocity profile. Different types of thermal boundary conditions are considered, including the effect of wall thermal inertia. The effects of Reynold and Prandtl numbers, as well as pulsation amplitude and frequency on heat transfer are investigated. The mechanism by which pulsation affects the developing region, by creating damped oscillations along the tube length of the time average Nusselt number, is explained.     

复式河道漫滩水流计算方法研究

对复式顺直河道和复式游荡型河道中漫滩洪水的计算方法进行了研究.其中，对复式顺直河道，从Shiono-Knight方法出发，将二次流项归并入雷诺切应力项，并将主槽和滩地的流速分布曲线直接相接，推导出一套不需联立求解系数方程组的漫滩水流流速和床面切应力分布的计算公式以及床面平均切应力的解析计算公式；对复式游荡型河道，建立了一种新的上层水流计算方法.文中的计算结果与前人的实验资料基本一致，初步表明文中的方法是合理的.     

适用于微机的核蒸汽发生器热工水力分析程序—SGTH—2

本程序用于计算核蒸汽发生器的热工水力分布参数以及一次侧流动压降、二次侧自然循环和稳态特性,将本程序的计算结果与法国对同型号蒸汽发生器的实测数据以及用 ATHOS 程序的相应计算结果进行比较,表明主要热工水力参数能令人满意地吻合。