纳米二氧化硅颗粒对PVDF超滤膜凝胶过程和结构的影响

以PDVF(聚偏氟乙烯)超滤膜为研究对象,通过凝胶动力学常数K、产生沉淀的聚合物层厚度的平方x2和凝胶时间t之间的关系、絮凝值的变化来反映SiO2颗粒对膜凝胶速率和膜结构的影响,并用膜凝胶动力学观测装置观察并记录成膜过程.实验结果表明,在铸膜液中添加纳米二氧化硅颗粒可以使聚偏氟乙烯超滤膜的凝胶速率减小,形成的膜更加致密.     

Effect of pH on the Crystallization of Homogeneously Precipitated Nanosized PZT Powder

Nanosized lead zirconate titanate (PZT) powder with Zr:Ti ratio in the morphotropic phase boundary region was synthesized by homogeneous precipitation of metal ions. The powder precipitated at 90°C and at pH 6.7 resulted single-phase perovskite lead zirconate titanate powder when calcined at 550°C and above for 4 hours in air. The solution pH and the precipitation temperature strongly affect the composition of the calcined powder. The results obtained by structural characterization of homogeneously precipitated powder were compared with that obtained from the conventional precipitation method using ammonia in terms of crystallization, homogeneity, and microstructure. The homogeneously precipitated powder showed smaller particle size, minimum agglomeration and uniform shape on calcination and annealing. Powdered samples that precipitated by homogeneous precipitation crystallized directly to perovskite PZT, without any intermediate pyrochlore phase formation. In contrast, the NH₃ precipitated powder converted to perovskite PZT via metastable pyrochlore and it showed phase segregation upon annealing at higher temperatures. The reaction kinetics has been studied by X-ray diffraction, differential thermal analysis, and differential scanning calorimetry.     

Inactivation Kinetics of Tomato Juice Lipoxygenase by Pulsed Electric Fields

ABSTRACT: Pulsed electric field (PEF) inactivation models for tomato juice lipoxygenase (LOX) were studied. Tomato juice was treated by PEF with the combinations of electric field strength (0, 10, 15, 20, 30, 35 kV/cm), PEF treatment time (20, 30, 50, 60, 70 μs), and PEF treatment temperature (10, 20, 30, 40, 50 °C). The first-order inactivation models, Hulsheger's model, Fermi's model, and the 2nd-order polynomial equation adequately described the LOX inactivation. Calculated D values were 161.0, 112.9, 101.0, and 74.8 μs at 15, 20, 30, and 35 kV/cm, respectively, at 30 °C. The activation energy for the inactivation of LOX by PEF was 35.7 kJ/mol. Applied electric field strength was the primary variable for the inactivation of LOX.     

Identification and modelling of aerobic hydrolysis – application of optimal experimental design

Hydrolysis mechanism plays a dominant role in the delicate balance of electron donor/electron acceptor ratios in BNR and EBPR systems as an important carbon source. In this study, the surface‐saturation‐type hydrolysis kinetics was investigated based on respirometric measurements, within the context of the theoretical and the practical identifiability of mathematical models. The identifiable parameters of a selected model were derived from respirograms. In addition, the information from the experiments was evaluated on the basis of Optimal Experimental Design (OED) methodology for different initial conditions of the batch respirometric experiment. © 2003 Society of Chemical Industry     

环己酮肟液相重排反应机理及动力学研究

研究了环己酮肟重排反应生成己内酰胺的机理及反应动力学方程。在建立用分光光度法测定环己酮肟浓度方法的基础上,实验研究了反应温度为20~45℃范围内的液相重排反应动力学。提出了此反应的化学反应动力学速率方程式: -r肟= k0exp (-E/RT)Ca肟Cb硫酸,其中环己酮肟反应级数a为2,硫酸反应级数b为1,活化能为-E/R = -19.86 kJmol-1, 频率因子k0为1.35×1027。通过实验研究证实了作为催化剂的硫酸参与重排反应的机理,认为重排反应过程中游离SO3不参与反应,仅作为水的吸收剂,此结论对环己酮肟液相重排反应的生产技术改造提供了有力依据,并在生产中得到了应用。     

Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

含两种不同共聚组分改性聚酯的结晶速率

添加己二酸、间苯二甲酸,聚乙二醇对PET进行改性,合成样品。用DSC法研究合成共聚物的等温结晶动力学。结果表明,在所选择的温度范围内,共聚物很好的符合Avrami方程。随温度的升高,共聚物的结晶速度常数K和Avrami指数n逐渐减小,结晶速度G逐渐降低。含2种柔性组分的共聚酯随着一种柔性组分含量的增加,结晶速率G上升;含一种刚性一种柔性组分的共聚酯随刚性组分含量的增加,结晶速率G下降。     

The process window for diamond deposition from the vapor phase with sulfur in the C–H–O feed gas mixtures

Theoretical predictions using a modified radical species ternary diagram for C–H–O system indicate that addition of sulfur expands the C–H–O gas phase compositional window for diamond deposition. Sulfur addition to no-growth domain increases the carbon super-saturation by binding the oxygen and the addition of sulfur to the non-diamond domain reduces the heavy carbon super-saturation by decreasing C_nH_m species concentration in the gas phase. The overall effect of sulfur addition to gas phase mixtures is characterized as that of oxygen addition to the C–H system, i.e. expansion of the compositional window over which diamond can be deposited from the gas phase. In addition, the increasing sulfur concentration to diamond domain feed gases beyond 2000 ppm did not affect the steady state gas phase composition but the quality of diamond was reduced.     

双环戊二烯聚合反应热力学和动力学研究

研究了ＤＣＰＤ－ＷＯＣｌ４－ＡｌＥｔ３体系前阶段的反应动力学，采用ＧＣ法分析了不同反应条件下的动力学数据，发现ｌｇ（［ＤＣＰＤ］０／［ＤＣＰＤ］）￣ｔ存在线性关系，说明该体系在前段的聚合反应为一链式反应符合二级反应模型。同时还对该体系聚合反应热力学也进行了研究；对聚合反应的ΔＨｐ、ΔＳｐ、ΔＧｐ进行了讨论。     

高分子材料辐射接枝苯乙烯的研究进展

对各高分子材料辐射接枝苯乙烯的动力学，接枝方法及接枝材料的应用进行了综述，讨论限辐射剂量，剂量率，温度，后效应，溶剂，添加剂和高分子材料厚度及结晶性等方面对接枝反应的影响。