Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

结构性黄土湿陷性指标室内测定方法的探讨

对黄土湿陷性指标的室内测定，国内外都借助标准压密仪，采用单线法或双线法进行。由于多种原因，我国各部委编制的试验规程，对采用何种方法，意见尚未统一。本文首先从人工制备结构性黄土的试验成果出发，讨论了黄土的湿陷线问题，认为非饱和结构性黄土存在湿陷线，且该线与饱和结构性黄土的压密曲线重合。从而说明在此简单应力路径下，单线法和双线法是等价的。接着，从日本大阪海成粘土不同室内压密方法得出的试验结果出发，就天然结构黄土，探讨了常规标准压密试验方法的不足，提议采用等应变压密双线法，来测定结构性黄土的湿陷性指标，从而有利于实际工程应用。     

晶须取向对SiCw／Al复合材料切削表面质量的影响

切削与晶须取向方向间的夹角对ＳｉＣｗ／Ａｌ复合材料切削表面质量有很大影响。当切削角为４５°时，晶须拔出和转动现象均较少，复合材料切削表面粗糙度最低。当切削角为１３５度时，晶段转动造成的撕裂破坏程度很大，复合材料切削表面粗糙度最大。     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

可压缩体的滑移线场理论

从理论上建立了可压缩体的滑移线场理论，并给出了解析实例。研究表明：在平面应变条件下，可压缩体内的两族滑移线不仅不正交，而且随着平均正应力的不同而变化；可压缩体的平面应变问题可以直接采用现有的致密体的滑移线场来求出。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

矩形件排样的一种优化算法

排样问题是一种总体资源分配问题，这里根据矩形件排样的工艺要求，提出了矩形件排样的一种近似算法，将一块板材分成三部分，每部分排一种零件，使得减料方便，提高了劳动生产率。     

Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

一种考虑不同期合闸的行波合闸保护新方法

当线路末端故障时，行波在线路末端的反射情况比较复杂，反向电流行波的极性有可能与正向电流行波的极性相反，而此时测距结果又与线路无故障时相同。因此，会造成行波测距式与行波极性比较式合闸保护的不正确动作。根据行波的折、反射理论，分析出当线路无故障时正向电流行波仅在线路末端发生反射，且电流行波的反射系数为-1，而当线路存在故障时，正向电流行波将在故障点发生反射，无论故障是否在线路末端，电流行波的反射系数都不会是-1。根据这一特征，提出了一种新的行波合闸保护方法。从原理上保证了在各种情况下保护都可以正确动作，大量的电磁暂态仿真结果也证明了这一点。     

200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。