季铵盐在羊毛抗菌整理中的应用

由于能够减少微生物滋生引起的织物异味和质量恶化等,纺织品的抗菌处理越来越受到研发人员和市场的重视。目前,抗菌织物的研究主要集中在棉和化纤上,对羊毛的研究仍然比较缺乏。文章使用一种具有杀菌作用的阳离子季铵盐苯扎氯铵对羊毛织物进行抗菌整理。实验结果表明,经过硫酸氢钾/亚硫酸钠预处理的羊毛织物能够在浸渍整理过程中吸附10%(owf)以上的苯扎氯铵,而未经预处理的羊毛织物只能吸附约1%(owf)的苯扎氯铵。预处理过的羊毛织物对苯扎氯铵的吸附率在20～60℃范围内没有明显变化,但在酸性条件下轻微下降。当羊毛表面苯扎氯铵的用量高于6%(owf)时,抗菌整理过的羊毛织物能够杀灭95.5%～99.9%的大肠杆菌,显示出很强的抗菌性。     

In-situ synthesis of zirconium oxycarbide by electroreduction of ZrO2/C in molten salt

Homogenous ZrC_xO_y powders have been successfully synthesized by in-situ electro-reduction of solid ZrO₂–C composite precursors in molten CaCl₂. The effect of applied cell voltage and molar ratio of ZrO₂ to C on preparation of ZrC_xO_y were investigated. The reduction pathway of the composite electrode was studied based on the analysis of intermediate products using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that ZrO₂ is firstly converted to CaZrO₃. The resulting CaZrO₃ is then reduced to ZrC_xO_y. The ZrC_xO_y formation is dramatically influenced by electrolysis voltage and molar ratio of ZrO₂ to C: a higher cell voltage and lower molar ratio of the ZrO₂ to C are more preferable for the formation of ZrC_xO_y powder. Homogenous ZrC_xO_y powders with particle size of ~100 nm are synthesized by ZrO₂/C starting elemental powders in CaCl₂ molten salt at 1123 K for more than 3 h, when the cell voltage is 3.0 V and the molar ratio of the ZrO₂ to carbon starting materials is 1:1.0.     

Identification,Phylogeny, and Comparative Expression of the Lipoxygenase Gene Family of the Aquatic Duckweed,Spirodela polyrhiza,during Growth and in Response to Methyl Jasmonate and Salt

Lipoxygenases (LOXs) (EC 1.13.11.12) catalyze the oxygenation of fatty acids and produce oxylipins, including the plant hormone jasmonic acid (JA) and its methyl ester, methyl jasmonate (MeJA). Little information is available about the LOX gene family in aquatic plants. We identified a novel LOX gene family comprising nine LOX genes in the aquatic plant Spirodela polyrhiza (greater duckweed). The reduced anatomy of S. polyrhiza did not lead to a reduction in LOX family genes. The 13-LOX subfamily, with seven genes, predominates, while the 9-LOX subfamily is reduced to two genes, an opposite trend from known LOX families of other plant species. As the 13-LOX subfamily is associated with the synthesis of JA/MeJA, its predominance in the Spirodela genome raises the possibility of a higher requirement for the hormone in the aquatic plant. JA-/MeJA-based feedback regulation during culture aging as well as the induction of LOX gene family members within 6 h of salt exposure are demonstrated.     

Synthesis and spectroscopic studies of some new azobenzenesulfonamide

Abstract

Diazotized sulfadiazine derivative (1) was coupled with some nitrogen heterocyclic namely (thiazolone derivatives 2a–c, thiazole derivatives 4a–c and barbituric acid derivatives 6a,b) to give the corresponding azo compounds 3a–c, 5a–c and 7a,b in good yields. The newly synthesized azo benzene sulfonamide dyes were recorded their UV visible spectra in the region 200–600?nm in four different solvents and discussed the effect of solvents, substituent and effect of acid and base on the absorption values of these dyes.     

Seismic life-cycle cost analysis of ageing highway bridges under chloride exposure conditions: modelling and recommendations

Chloride-induced corrosion of highway bridges constitutes a critical form of environmental deterioration and may result in significant escalation of seismic life-cycle costs due to increased fragility during earthquake events. Most of existing literature tends to adopt simplistic uniform area loss assumptions in lieu of potentially complex, yet realistic and more detrimental, pitting corrosion models for seismic vulnerability analysis. Since the degree of deterioration depends on the severity and duration of exposure, there exists a need to investigate the influence of uniform vs. pitting corrosion assumption on seismic life-cycle costs for varied chloride exposure conditions. A case-study example of a highway bridge in Central and Southeastern US reveals consideration of pitting corrosion as critical for extreme exposures compared to relatively minor settings. Subsequently this study provides recommendations to aid bridge engineers and stakeholders to balance between computational cost and accuracy of results to aid prompt decisions on rehabilitation of ageing bridges in different exposure conditions. A framework is also included to compute seismic life-cycle costs from generic measures of corrosion, independent of assumed exposure scenario. This framework is particularly helpful for seismic loss assessment of highway bridges in chloride exposure zones with periodic field measurements to estimate the extent of structural deterioration.     

Synthesis of high-entropy diboride nanopowders via molten salt-mediated magnesiothermic reduction

Powder synthesis is critical for implementing the wide applications of high-entropy diborides (HEBs). However, the low-temperature synthesis of HEB powders was rarely reported. Herein, the low-temperature synthesis of the single-phase HEB nanopowders via molten salt-mediated magnesiothermic reduction (MMR) method was reported for the first time. The results showed that the as-synthesized nanopowders consisted of the single-phase HEBs and their average particle sizes are in the range of 28-56 nm. Meanwhile, they possessed the good compositional homogeneity and the low-content oxygen impurity in the range of 4.13-6.12 at%. In addition, their formation mechanism could be well interpreted by a classical MMR growth process.     

In situ synthesis of Al2O3–SiC powders via molten-salt-assisted aluminum/carbothermal reduction method

Al₂O₃–SiC composite powder (ASCP) was successfully synthesized using a novel molten-salt-assisted aluminum/carbothermal reduction (MS-ACTR) method with silica fume, aluminum powder, and carbon black as raw materials; NaCl–KCl was used as the molten salt medium. The effects of the synthesis temperature and salt-reactant ratio on the phase composition and microstructure were investigated. The results showed that the Al₂O₃–SiC content increased with an increase in molten salt temperature, and the salt–reactant ratio in the range of 1.5:1–2.5:1 had an impact on the fabrication of ASCP. The optimum condition for synthesizing ASCP from NaCl–KCl molten salt consisted of maintaining the temperature at 1573 K for 4 h. The chemical reaction thermodynamics and growth mechanism indicate that the molten salt plays an important role in the formation of SiC whiskers by following the vapor-solid growth mode in the MS-ACTR treatment. This study demonstrates that the addition of molten salt as a reaction medium is a promising approach for synthesizing high-melting-point composite powders at low temperatures.     

First principles computational studies of spontaneous reduction reaction of Eu(III) in eutectic LiCl‐KCl molten salt

Using first principles calculations, we study fundamental mechanism of spontaneous reduction reaction of Eu³⁺ to Eu²⁺ in eutectic LiCl‐KCl molten salt. We decouple the reaction Gibbs free energy into enthalpy and entropy contributions by using rigorous thermodynamic formalism. Key structural features of the solvation shell are characterized by the radial distribution function and the coordination number. Compared with Eu²⁺, the Eu³⁺ ion has a more rigid framework of the solvation shells, corroborating its stronger electrostatic interaction with neighboring ligands of Cl^? ions and a more favorable state on the aspect of enthalpy. Computations on vibrational frequency, however, pose significant contribution of vibrational entropy to the reaction Gibbs free energy for the reduction. Vibration frequency of Eu²⁺ is smaller than that of Eu³⁺, driving a more positive change of the entropy in the reduction reaction. Furthermore, an Eu²⁺ diffuses more quickly than an Eu³⁺ in the LiCl‐KCl molten salt with switching mechanism of ligand Cl^? ions in the solvation shell. Our results propose that the spontaneity of the reduction reaction is driven by the entropic contribution by overcoming the penalty of the reaction enthalpy.     

不同盐沼湿地类型脱氮除磷效能及影响因素分析

采用沉水植物表面流湿地(沉水组)、挺水植物表面流湿地(挺水组)和浮床湿地(浮床组)3种盐沼湿地对长江口近岸低污染水体进行脱氮除磷效能的研究。结果表明,HRT为3 d时,水组、挺水组、浮床组对NO3^--N的去除率在高温时段分别为79.9%±13.2%、71.8%±15.2%、77.2%±13.2%,中温时段分别为39.4%±13.7%、31.5%±8.5%、18.4%±16.6%,低温时段分别为15.6%±14.6%、19.7%±8.6%、2.%5±8.6%。沉水组和挺水组对TP的去除率受温度影响较小,分别为66.4%±32.4%、55.5%±29.4%;而浮床组除磷效果受温度影响较大。当HRT缩短为1.5 d时,3组湿地系统在高温时段仍可达到相近的脱氮除磷效果,在中低温时段脱氮除磷效果都有不同程度的下降。     

Green preparation of in situ Cr3C2 nano-coatings on graphite surface and their water-wettability and rheological properties

Cr₃C₂ coatings were successfully prepared on the surface of graphite flakes via a molten salt route by mixing Cr powders with natural graphite flakes in a binary LiCl-KCl salt at 450–950?°C for 4–12?h. The phases and microstructures of the coatings were verified by its XRD/XPS spectra and SEM/AFM observations, respectively. Together with the dissolution/dispersion evidence of chromium powders after interaction with the salt, and the slightly increased particle sizes due to the formation of Cr₃C₂ coatings on graphite flakes, a ‘template-growth’ kinetic process was therefore proposed on the formation of such coatings in the molten salt. The resultant coatings decreased the contact angle between water and graphite from 101° to ~ 75° and lowered the apparent viscosities of graphite water slurry by two orders of magnitude accordingly, suggesting that the coatings will afford graphite with good processing abilities for carbon-water based materials.