Effects of Electromagnetic Waves with LTE and 5G Bandwidth on the Skin Pigmentation In Vitro

With the rapid growth of wireless communication devices, the influences of electromagnetic fields (EMF) on human health are gathering increasing attention. Since the skin is the largest organ of the body and is located at the outermost layer, it is considered a major target for the health effects of EMF. Skin pigmentation represents one of the most frequent symptoms caused by various non-ionizing radiations, including ultraviolet radiation, blue light, infrared, and extremely low frequency (ELF). Here, we investigated the effects of EMFs with long-term evolution (LTE, 1.762 GHz) and 5G (28 GHz) bandwidth on skin pigmentation in vitro. Murine and Human melanoma cells (B16F10 and MNT-1) were exposed to either LTE or 5G for 4 h per day, which is considered the upper bound of average smartphone use time. It was shown that neither LTE nor 5G exposure induced significant effects on cell viability or pigmentation. The dendrites of MNT-1 were neither lengthened nor regressed after EMF exposure. Skin pigmentation effects of EMFs were further examined in the human keratinocyte cell line (MNT-1-HaCaT) co-culture system, which confirmed the absence of significant hyper-pigmentation effects of LTE and 5G EMFs. Lastly, MelanoDerm™, a 3D pigmented human epidermis model, was irradiated with LTE (1.762 GHz) or 5G (28 GHz), and image analysis and special staining were performed. No changes in the brightness of MelanoDerm™ tissues were observed in LTE- or 5G-exposed tissues, except for only minimal changes in the size of melanocytes. Collectively, these results imply that exposure to LTE and 5G EMFs may not affect melanin synthesis or skin pigmentation under normal smartphone use condition.     

Toxoplasma gondii GRA9 Regulates the Activation of NLRP3 Inflammasome to Exert Anti-Septic Effects in Mice

Dense granule proteins (GRAs) are essential components in Toxoplasma gondii, which are suggested to be promising serodiagnostic markers in toxoplasmosis. In this study, we investigated the function of GRA9 in host response and the associated regulatory mechanism, which were unknown. We found that GRA9 interacts with NLR family pyrin domain containing 3 (NLRP3) involved in inflammation by forming the NLRP3 inflammasome. The C-terminal of GRA9 (GRA9C) is essential for GRA9–NLRP3 interaction by disrupting the NLRP3 inflammasome through blocking the binding of apoptotic speck-containing (ASC)-NLRP3. Notably, Q200 of GRA9C is essential for the interaction of NLRP3 and blocking the conjugation of ASC. Recombinant GRA9C (rGRA9C) showed an anti-inflammatory effect and the elimination of bacteria by converting M1 to M2 macrophages. In vivo, rGRA9C increased the anti-inflammatory and bactericidal effects and subsequent anti-septic activity in CLP- and E. coli- or P. aeruginosa-induced sepsis model mice by increasing M2 polarization. Taken together, our findings defined a role of T. gondii GRA9 associated with NLRP3 in host macrophages, suggesting its potential as a new candidate therapeutic agent for sepsis.     

A multi-material part design framework in additive manufacturing

Additive manufacturing (AM) technologies provide more freedom to functional part design in various industries. One of the unique capabilities of AM is that multi-material parts can be produced with material compositional and geometric complexity. Multi-material parts have the advantage of achieving multiple performance requirements. In the research, we propose a framework for designing multi-material parts using AM processes. The proposed framework is composed of four interacting modules, including design requirement identification, primary material selection, AM process selection, material composition, and part geometry determination. Rules and guidelines for AM are integrated into the proposed framework with AM processes’ capabilities and constraints compiled in databases. We also introduce databases to assist in decision-making and ensure manufacturability of the designed multi-material part in various product design phases. The proposed framework is applied to a case study involving a conceptual design of a multi-material battery pack cooling plate.     

Highly Bendable and Rotational Textile Structure with Prestrained Conductive Sewing Pattern for Human Joint Monitoring

Human joints have respective ranges of motion and joint forces corresponding to each kind of joint; this necessitates considerations of the characteristics of human joints to fabricate wearable strain sensors conformable to the human body, and capable of precisely monitoring complex motions of the human body. In the present study, the “all textile‐based highly stretchable structure” that is capable of precisely sensing motions (folding and rotation) of the human joints (finger, wrist, elbow, spine, and knee) is fabricated by optimizing patterns (straight, blind, and zigzag) of conductive yarns employed as the conductive part of the strain sensor, and several textile substrates (braided elastic fabric, knit fabric, and woven fabric), having preferable elasticity and conformability employed for the fabrication of strain sensors suitable for human joints. In particular, the technology, enabling the prestraining of textile substrate, is exploited to fabricate a strain sensor that is capable of outputting selective signals corresponding to the folding motion of the spinal joint over a predetermined angle of motion, and the gait pattern of the wearer of the sensor, attached to his or her knee joint doing folding and rotational motions, is analyzed.     

Correlations between histopathologic and dermoscopic findings in Korean actinic keratosis

Skin biopsy for AK diagnosis is usually performed on only a limited part of the whole lesion. Therefore, a clinical diagnosis is important. According to a study, there is no significant correlation between histopathological and clinical classification system. We examined the correlation between microscopic information and dermoscopic findings to deduce if dermoscopic information reflects histopathologic grade severity. Forty seven patients with histologically confirmed AK were enrolled and positive ratio of red pseudonetwork, rosette, red background and targetoid signs, white‐to‐yellow scale, white structureless area, and pigmentation from dermoscopic findings were investigated. Furthermore, viable epidermal thickness, vessel lumen dimensions, existence and thickness of ortho‐ and parakeratosis, degree of sola elastosis, flag sign existence, and Roewert‐Huber classification were measured as histologic findings. Red background did not show a significant correlation with vascular dimension or viable epidermal thickness. When targetoid sign was present, vascular dimension was significantly larger but showed no correlation with viable epidermal thickness, parakeratosis or orthokeratosis. Solar elastosis level was significantly higher when white‐to‐yellow scale was present. According to Spearman's correlation analysis, ortho/parakeratotic thickness showed correlations with each other. The negative correlation between viable epidermal thickness and vascular dimension was also shown. Roewert‐Huber histologic AK classification showed no correlation with any factors we checked. Factors considered to be characteristic features of AK in dermoscopy seemed unassociated with histologic AK classification and additional research is needed to determine degree of dysplasia of AK lesions using dermoscopy.     

How do Virtual Badges Incentivize Voluntary Contributions to Online Communities?

Online communities rely heavily on badges to incentivize users to participate in voluntary activities. We examine the relationship between earned badges/pursued badges and contributions in the Stack Overflow question and answer community. Our main results reveal that different levels of earned and pursued badges increase the amount of subsequent answering activity. In addition, earned gold badges are the most influential in the motivation of users while earned bronze badges are the least impactful. Furthermore, the effect of badges involves positive spillovers from higher levels of earned badges to lower ones. Our findings offer important theoretical and managerial implications for online communities.     

Phenotypic Discovery of SB1501, an Anti-obesity Agent,through Modulating Mitochondrial Activity

Obesity has become a pandemic that threatens the quality of life and discovering novel therapeutic agents that can reverse obesity and obesity-related metabolic disorders are necessary. Here, we aimed to identify new anti-obesity agents using a phenotype-based approach. We performed image-based high-content screening with a fluorogenic bioprobe (SF44), which visualizes cellular lipid droplets (LDs), to identify initial hit compounds. A structure-activity relationship study led us to yield a bioactive compound SB1501, which reduces cellular LDs in 3T3-L1 adipocytes without cytotoxicity. SB1501 induced the expression of gene products that regulate mitochondrial biogenesis and fatty acid oxidation in 3T3-L1 adipocytes. Daily treatment with SB1501 improved the metabolic states of db/db mice by reducing body fat mass, adipose tissue mass, food intake, and increasing glucose tolerance. The anti-obesity effect of SB1501 may result from perturbation of the PGC-1α–UCP1 regulatory axis in inguinal white adipose tissue and brown adipose tissue. These data suggest the therapeutic potential of SB1501 as an anti-obesity agent via modulating mitochondrial activities.     

Luminescent and magnetic properties of cerium-doped yttrium aluminum garnet and yttrium iron garnet composites

Functional materials exhibiting magnetic and luminescent properties have been recognized as an emerging class of materials with great potential in advanced applications. Herein, properties of multifunctional ceramic composites consisting of two garnets, luminescent cerium-doped Y₃Al₅O₁₂ (Ce:YAG) and magnetic Y₃Fe₅O₁₂ (YIG), are reported. On increasing the sintering temperature, both the photoluminescence and saturation magnetization of the Ce:YAG-YIG composites decreased gradually because of the interdiffusion of trivalent ions such as Al³⁺ and Fe³⁺. At a constant sintering temperature of 1100?°C, the YIG contents in the composites increased, thereby causing their luminescent properties to degrade and the saturation magnetizations to increase. For application to electronics, Ce:YAG-YIG composite thin films were integrated on quartz substrates by sputtering the ceramic target. The composite thin films exhibited both magnetic and luminescent properties after annealing. These techniques facilitate the incorporation of multifunctional nanocomposites into various devices.