Structural and magnetic properties of Co1+ySnyFe2-2y-xCrxO4 ferrite system

The samples of the series Co_1+ySn_yFe_{2- 2y- x}Cr_xO₄ ferrites with x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5 and y = 0.05, were prepared by the usual double sintering ceramic technique. The single- phase spinel structure of the samples was confirmed by using X- ray diffractometry technique. The lattice parameter ’a’ with an accuracy of ± 0.002 Å were determined using Bragg peaks of XRD pattern. The lattice parameter ’a’ decreases with concentration, x, which is due to the difference in the ionic radii of Cr³⁺ and Fe³⁺ ions. The X- ray intensity calculations were carried out in order to determine the possible cation distribution amongst tetrahedral (A) and octahedral [B] sites. The X- ray intensity calculations show Cr³⁺ ions occupying B site. The saturation magnetization, σ_s, and magneton number, n_B (the saturation magnetization per formula unit), measured at 300 K determined from high field hysteresis loop technique decrease with increase in concentration, x, suggesting a decrease in ferrimagnetic behaviour. Thermal variation of low field a.c. susceptibility measurements from room temperature to about 800 K exhibits almost normal ferrimagnetic behaviour and the Curie temperature, T_C determined from a.c. susceptibility data decreases with increase in x.

     

Asymptotic stress intensity factor density profiles for smeared-tip method for cohesive fracture

The paper presents a computational approach and numerical data which facilitate the use of the smeared-tip method for cohesive fracture in large enough structures. In the recently developed K-version of the smeared tip method, the large-size asymptotic profile of the stress intensity factor density along a cohesive crack is considered as a material characteristic, which is uniquely related to the softening stress-displacement law of the cohesive crack. After reviewing the K-version, an accurate and efficient numerical algorithm for the computation of this asymptotic profile is presented. The algorithm is based on solving a singular Abel's integral equation. The profiles corresponding to various typical softening stress-displacement laws of the cohesive crack model are computed, tabulated and plotted. The profiles for a certain range of other typical softening laws can be approximately obtained by interpolation from the tables. Knowing the profile, one can obtain with the smeared-tip method an analytical expression for the large-size solution to fracture problems, including the first two asymptotic terms of the size effect law. Consequently, numerical solutions of the integral equations of the cohesive crack model as well as finite element simulations of the cohesive crack are made superfluous. However, when the fracture process zone is attached to a notch or to the body surface and the cohesive zone ends with a stress jump, the solution is expected to be accurate only for large-enough structures.     

An adaptive non‐conforming finite‐element method for Reissner–Mindlin plates

Adaptive algorithms are important tools for efficient finite‐element mesh design. In this paper, an error controlled adaptive mesh‐refining algorithm is proposed for a non‐conforming low‐order finite‐element method for the Reissner–Mindlin plate model. The algorithm is controlled by a reliable and efficient residual‐based a posteriori error estimate, which is robust with respect to the plate's thickness. Numerical evidence for this and the efficiency of the new algorithm is provided in the sense that non‐optimal convergence rates are optimally improved in our numerical experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

Norman Joseph Slamecka (1928-2003).

Presents an obituary for Norman J. Slamecka (1928-2003). Slamecka and his wife Jan were killed suddenly in a pedestrian accident on August 2, 2003, in Lewes, Delaware. He was a Marine veteran of the Korean War, and after a few years of practice as a clinical psychologist for the Veterans Administration, he accepted a faculty position at the University of Vermont in Burlington. He then taught at the State University of New York at Buffalo for a short while before coming to the University of Toronto in 1970, where he remained until his retirement in 1994. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

矩形微带串馈线阵的设计和仿真

介绍了矩形微带贴片天线的特点、原理和设计方法,设计了3×1矩形贴片组成的串馈驻波线阵,运用以有限元法为原理的专业软件AnsoftHFSS对该天线进行仿真,并与测量结果进行比较,仿真结果与测量结果吻合。     

灯泡贯流式机组发电机冷却装置技术改造方式的探讨

灯泡贯流式发电机组直径小,转速低,发电机的通风冷却是一个难点。通过对京南、马骝滩、石面坦及南津渡等水电站的发电机运行过程中出现的温升过高,定子线棒绝缘受损等问题的分析,提出了解决的措施与改进方案,并对灯泡贯流式机组冷却系统的设计提出了建议,可供参考和借鉴。     

Implicit integration and consistent tangent modulus of a time‐dependent non‐unified constitutive model

This paper describes the implicit integration and consistent tangent modulus of an inelastic constitutive model with transient and steady strain rates, both of which are time‐ and temperature‐dependent; the transient rate is influenced by the evolution of back stress decomposed into parts, while the steady rate depends only on applied stress and temperature. Such a non‐unified model is useful for high‐temperature structural analysis and is practical owing to the ease in determining material constants. The implicit integration is shown to result in two scalar‐valued coupled equations, and the consistent tangent modulus is derived in a quite versatile form by introducing a set of fourth‐rank constitutive parameters into the discretized evolution rule of back stress. The constitutive model is, then, implemented in a finite element program and applied to a lead‐free solder joint analysis. It is demonstrated that the implicit integration is very accurate if the multilinear kinematic hardening model of Ohno and Wang is employed, and that the consistent tangent modulus certainly affords quadratic convergence to the Newton–Raphson iteration in solving nodal force equilibrium equations. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and structural characterization of new defect pyrochlore type AxLnySb2O6+z antimoniates (0<x, y, z<1; A = Rb, Cs, Tl; Ln = Eu, Gd, and Y) prepared by coprecipitation

New cubic defect pyrochlore type A_xLn_ySb₂O_6+z antimoniates (0<x,y,z<1; A=Rb, Cs, Tl; Ln=Eu, Gd, and Y) (space group Fd3m) were prepared by calcination in air at 650 °C of compositions obtained by a coprecipitation method. Their crystal structures were refined by the Rietveld procedure and further confirmed by X-ray absorption spectroscopy (EXAFS) experiments. Refinements of the X-ray powder diffraction data show a partial and statistical occupation of the 8b site by alkaline or thallous ions and oxygen and lead to values close to 0.33 for the only refinable positional x parameter of the 48f oxygenated site.     

高放废液中^147Pm的测定

建立了高放废液中~(147)Pm的测定方法。用HDEHP萃取稀土,再用HDEHP萃淋树脂柱分离AM和稀土。然后用高效液相色谱法将~(147)Pm从Eu、Ce等其它稀土中分离出来,用液体闪烁法测量~(147)Pm的放射性活度。     

CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

研究了氢化处理对退火α-Ti 板材的组织、结构及性能的影响。α-Ti 在室温出现两种结构的氢化物:有序的fctγ相(TiH)和fccδ相(TiH_2)。分析了用X 射线衍射只查觉到δ相的原因。氢化物的数量及形态影响除氢后基体的晶粒组织。控制氢含量可以改善拉伸性能及疲劳性能。