电机系统综合应用实验教学的研究

分析了目前电机实验教学的现状，指出电机实验教学存在的问题，针对自动化类专业学生掌握电机及其综合应用实验的教学内容，提高应用电机的能力和基本素质等方面进行了研究。     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

三相异步电动机可靠性和经济分析

根据三相异步电动机的主要失效模型,利用概率分析和补充变量方法,求得了三相异步电动机的可靠性指标和运行的经济指标。     

同步电动机改型设计

对同步电动机从400V改为6000V过程中的几个问题通过实例进行分析说明,可供同步电机的改型设计参考。     

The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

偏振混合对双波长外差干涉仪精度的影响分析

本文分析了偏振混合在双波长外差干涉仪中所产生的误差，指出其是干涉仪相位抖动的主要原因．     

电机拆线固定装置的制作

针对传统拆线方法劳动强度大及不安全性,制作电机拆线固定装置,为车间的生产提 供安全保障。     

新型环氧树脂绝缘浸渍胶（WSK）在微特电机上的应用

介绍了新型环氧树脂少溶剂快干绝缘浸渍胶的性能试验数据及基在微特电机上的应用及注意事项。     

电流模精密整流电路

由电压型运算放大器组成的精密整流电路要严格地匹配电阻才能获得精密全波整流波形．本文给出一种具有CCⅡ电路特性由运算放大器AD844所构成的电流模精密整流电路．无需匹配电阻就可输出良好的精密全波整流波形．且具有输入电压范围大，频带宽等特点．     

变速铣削的试验研究

通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度，试验结果表明，变速铣削同样具有明显的减振效果。机床电机电流虽有波动，但波动幅度不大，不会影响电机的正常使用，变速铣削具有良好的应用前景。