Automatic generation of IDEF0 models

This paper looks into a new area for knowledge-based system application, that of manufacturing modelling. Manual generation of IDEF0 models of manufacturing systems is time-consuming and inconsistent. However, the process can be automated to improve timeliness and consistency. In this paper, a knowledge-based manufacturing modelling system for the automatic generation of IDEF0 models is proposed. The system will not only greatly reduce the IDEF0 modelling time but will also eliminate the inconsistency problem of conventional IDEF0 modelling systems. The paper explains the knowledge-based approach and identifies the kinds of domain knowledge that are required for the construction of the knowledge-based manufacturing modelling system.     

Ammonia-water absorption machines for refrigeration: theoretical and real performances

In principle, absorption chillers of the ammonia-water type could work at temperatures well below the usual air-conditioning temperatures, arriving at the range 250–260 K, which can be useful for refrigeration applications. This possibility is studied for an air-cooled machine, comparing the results with the experimental data supplied by a manufacturer that recently commercialized such a refrigerator. The prediction is fair, and the study allows an insight into the internal parameters and into the possible behaviour for more severe conditions than those studied.     

Heat transfer enhancement by Marangoni convection in the NH3–H2O absorption process

The objectives of this paper are to quantify the effect of Marangini convection on the absorption performance for the ammonia–water absorption process, and to visualize Marangoni convection that is induced by adding a heat transfer additive, n-octanol. A real-time single-wavelength holographic interferometer is used for the visualization using a He–Ne gas laser. The interface temperature is always the highest due to the absorption heat release near the interface. It was found that the thermal boundary layer (TBL) increased faster than the diffusion boundary layer (DBL), and the DBL thickness increased by adding the heat transfer additive. At 5 s after absorption started, the DBL thickness for 5 mass% NH₃ without and with the heat transfer additive was 3.0 and 4.5 mm, respectively. Marangoni convection was observed near the interface only in the cases with heat transfer additive. The Marangoni convection was very strong just after the absorption started and it weakened as time elapsed. It was concluded that the absorption performance could be improved by increasing the absorption driving potential (x_vb−x_vi) and by increasing the heat transfer additive concentration. The absorption heat transfer was enhanced as high as 3.0–4.6 times by adding the heat transfer additive that generated Marangoni convection.     

Conceptual design of a high-efficiency absorption cooling cycle

The search for high-efficiency, gas-fired cooling cycles has led to the development of dual-loop absorption machines with cooling coefficients of performance (COPs) in the 1.2 to 1.7 range. This increased performance may call for high generator temperatures, new working fluids or new materials of construction. In most cases, two different sets of working fluids are required. The conceptual design presented here is aimed at obtaining high efficiencies with relatively low temperatures, employing only one set of fluids. The concept consists of two loops coupled in a configuration aimed at minimizing the loss of thermodynamic availability incurred when transferring refrigerant between the loops. The working fluid pair is a solution of lithium bromide-water. The calculated COPs are of the order of 1.8. The cycle relies on an elaborate evaporator-absorber combination. The paper presents the conceptual design, the critical assumptions, and the performance calculations for the concept.     

InAs／InP_（0．7）Sb_（0．3）热电子晶体管的f_T及f_（max）

用电荷控制及热电子弹道运动模型计算ＩｎＡｓ／ＩｎＰ０．７Ｓｂ０．３热电子晶体管的截止频率ｆＴ及最高振荡频率ｆｍａｘ。结果表明，ｆＴ、ｆｍａｘ分别达到２８０ＧＨｚ及６００ＧＨｚ。并指出，通过生长ＧａＳｂ中间层，ＩｎＡｓ／ＩｎＰ０．７Ｓｂ０．３ＨＥＴ可在ＧａＡｓ衬底上实现单片集成。     

推广的Kantorovi多项式的L_p保持Lipschitz条件性

本文研究推广的Kantorovi多项式P_n~*(f, x)在L_p[0,1]空间中的保持Lipschitz条件性质。     

Benefits to 0+ fishes of connecting man‐made waterbodies to the lower River Trent,England

Floodplain waterbodies are reputed to enhance recruitment of riverine fish populations via provision of spawning and nursery habitat, refuge from floods, and increased availability of planktonic food resources compared with main river channels. Notwithstanding, there have been few parallel studies of fishes and their food resources at both main river and floodplain sites. Thus, this study investigated the 0+ fishes, zooplankton and phytoplankton (chlorophyll a) at four main river and four (man‐made) floodplain sites on the lower River Trent, England, between May 1999 and October 2004 inclusive. All sites shared the same key fish species, and there were no consistent differences in the densities, growth or condition of 0+ fishes from main river and floodplain sites. Similarly, all sites shared the same key zooplankton taxa. However, zooplankton densities, notably of large‐bodied cladocerans, and chlorophyll a concentrations, were significantly higher at floodplain sites than at main river sites. Thus, connection of man‐made waterbodies has the potential to enhance recruitment of riverine fish populations via provision of important spawning and nursery habitat, and superior feeding opportunities for 0+ fishes compared with main river channels. Copyright © 2007 John Wiley & Sons, Ltd.     

应用ITO膜作电荷收集极的位置灵敏探测器

首次尝试将ITO（Indium Tin Oxide）膜与微通道板（Microchannel Plate）结合用作位置灵敏探测器，并对该探测器的线性、位置分辨及探测效率作了测试，得到了令人满意的结果。     

Performance of compression/absorption hybrid refrigeration cycle with propane/mineral oil combination

This paper discusses the feasibility of a vapor compression/absorption hybrid refrigeration cycle for energy saving and utilization of waste heat. The cycle employs propane as a natural refrigerant and a refrigeration oil as an absorbent. A prototype of the cycle is constructed, in which a compressor and an absorption unit are combined in series. The performance of the cycle is examined both theoretically and experimentally. Although the solubility of the propane with the oil is not enough as a working pair in the absorption unit, the theoretical calculation shows that the hybrid cycle has a potential to achieve a higher performance in comparison with a simple vapor compression cycle by using the waste heat. In the experiment, the prototype cycle is operated successfully and it is found that an improvement of an absorber is necessary to achieve the good performance close to the theoretical one. The application of an AHE (absorber heat exchanger) can reduce the heat input to a generator. Further examinations on some other combinations of refrigerant/refrigeration oil and additives are desirable.     

直接序列扩展频谱中伪码优选研究

本文从最优化理论和工程实际出发，全面分析和完善了直接序列扩展频谱中伪码的数学模型，在此基础上，建立了一种较准确的伪码优选数学模型，并探讨了合适的搜索算法。