Investigation of electrode and hydrogen induced crack in welded joint of dissimilar steel

The welded joint of dissimilar heat-resisting steels 20Crl2MoV(F12)and 12 Cr2MoWVTiB(102)generally works around 600°C.In this paperthree kinds of ferritic electrodes are used for testing.They are R817 high-strength electrode(CrllMoVNi),R347 low-strength electrode(Cr2MoVWB)and newly-developed R507MoNb medium-strength electrode.The study on theinfluence of those three different electrodes on carbon migration,HIC and hy-drogen diffusion shows that medium-strength electrodes can well control thecarbon migration,and that the tendency to HIC in the joint formed by R817 issmaller than that by R347 instead.Considering the effect of weld metal transfor-mation on the restraint stress and hydrogen concentration of a joint,the hydro-gen distribution in the heat-affected zone(HAZ)is calculated by using finite ele-ment method(FEM)with stress and strain changing,and so the effect of thetransformation behaviour on HIC is revealed.In addition,newly-developedR507MoNb electrodes,tested the elevated-temperature property,oxidation re-sistance and creep rupture strength,have fulfilled the technical standards con-cerned and passed the examination of on-the-spot operation.     

相变存储器曝光工艺研究

介绍了在相变材料上的曝光工艺研究,得出了相应的工艺条件,研究了邻近效应的影响以及利用邻近效应制作nm量级间隔大电极对的方法。     

Effects of thermal oxidation conditions of silicon electrodes on cathodic electrochemiluminescence of Ru(bpy)3 chelate

Hot electrons emitted from thin oxide film-coated heavily doped silicon electrodes by cathodic pulse polarization can induce electrochemiluminescence from luminophores. The intensity of electrochemiluminescence produced at the electrode surface is dependent on the features of thin oxide films formed by thermal oxidation. As a preliminary study, we investigated the effect of thermal oxide growth conditions on the intensity of electrochemiluminescence produced at these electrodes, such as oxidation atmospheres, oxidation temperature, oxidation time and pre-treatment of wafers, using ruthenium(II) tris-(2,2′-bipyridine) chelate as a model luminophore. Optimal oxidation conditions of heavily doped silicon electrodes were obtained for the generation of intense electrochemiluminescence at this kind of silicon electrodes.     

石墨电极高温抗氧化技术研究现状

概述石墨电极抗氧化技术的研究现状，重点介绍选择抗氧化涂层体系的要求及涂层制备方法，包括包埋浸渗法、化学气相沉积法、等离子喷涂法及溶胶--凝胶法．展望了石墨电极材料高温抗氧化涂层研究的方向．     

Electrochemical determination of estradiol using a poly(l-serine) film-modified electrode

A thin film of poly(l-serine) was prepared via electropolymerization for the determination of trace levels of estradiol. In pH 5.0 phosphate buffer, l-serine was oxidized during the cyclic potential sweeps between −0.60 and 2.0 V, forming a thin film at the electrode surface. The electrochemical behavior of estradiol was investigated. The oxidation peak potential of estradiol shifts negatively at the poly(l-serine) film-coated glassy carbon electrode (GCE) compared with that at the bare GCE. Otherwise, the oxidation peak current greatly increases at the poly(l-serine) film-modified GCE. These phenomena suggest that the poly(l-serine) film exhibits catalytic activity towards the electrochemical oxidation of estradiol. Based on this, a sensitive, rapid and simple electrochemical method was proposed for the determination of estradiol. The limit of detection is evaluated to be 2.0 × 10⁻⁸ mol L⁻¹. Finally, this method was successfully used to determine estradiol in blood serum.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

A disposable sensor based on immobilization of acetylcholinesterase to multiwall carbon nanotube modified screen-printed electrode for determination of carbaryl

A simple method has been devised for immobilization of acetylcholinesterase (AChE) covalent bonding to a multiwall carbon nanotube (MWNT)-cross-linked cellulose acetate composite on a screen-printed carbon electrode (SPCE) and a sensitive and disposable amperometric sensor for rapid determination of carbaryl pesticide is proposed. The immobilized enzyme was preserved on this film because of the excellent biocompatibility and non-toxicity of cellulose acetate. Based on the inherent conductive properties of the MWNT, the immobilized AChE had greater affinity for ATCl and excellent catalytic effect in the hydrolysis of ATCl. MWNT improved the interface enzymatic hydrolysis reaction and increased the amperometric response of the sensor. Under optimum conditions, the inhibition of carbaryl on AChE increased linearly with the increasing concentration of carbaryl in two ranges, from 0.01 to 0.5 μg mL⁻¹ and from 2 to 20 μg mL⁻¹, with the correlation coefficients of 0.9985 and 0.9977, respectively. The detection limit was 0.004 μg mL⁻¹ taken as the concentration equivalent to 10% decrease in signal. The sensor showed acceptable stability, accuracy and could be fabricated in batches, thus it is economic and portable. This type of disposable enzyme-based amperometric sensor has extensive application potential in environmental monitoring of pesticides.     

Oxidation of some aliphatic polyols on anodically deposited MnO2

Galvanostatic steady state current potential measurements were carried out for oxidation of a series of aliphatic alcohols having varying number of hydroxyl groups. The anodically deposited layer of MnO₂ on platinum was used as the electrode material. The deposit was characterised by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrode potential measurements. The catalytic role of MnO₂ in the electro-oxidation of alcohols was indicated by the chronopotentiograms and the cyclic voltammograms. An analysis of the electrochemical data indicated a catalytic EC mechanism in which Mn (V) is generated electrochemically and consumed chemically in succession. Based on this and the hydrogen bonding interaction between alcoholic hydroxyl groups and MnO₂ layer, a mechanism was proposed which accounts for the variation in the observed electrochemical reaction orders. Tafel behaviour was found to be followed only approximately. Current efficiency of the electrochemical oxidation of polyols was studied. Replacement of platinum by carbon as current collector was found to leave the electrocatalytic activity of the MnO₂ deposit practically unaltered.     

Electrochemical behaviour of phenylethanolamine at gold in aqueous solution

The electrooxidation of phenylethanolamine (2-amino-1-phenylethanol) at a gold electrode in alkaline electrolyte has been studied. Measurement of the differential capacitance of the electric double layer versus the electrode potential has shown that the adsorption of phenylethanolamine at the gold-solution interface plays a significant role in the oxidation mechanism. The effect of amine concentration, electrolyte pH and potential scan rate on the electrooxidation is analysed.     

ΝΗ<Subscript>3</Subscript> decomposition in a proton conducting solid electrolyte cell

The reaction of NH₃ decomposition was studied on Ag in a proton conducting double chamber cell-reactor. The proton conductor was a strontia-ceria-ytterbia (SCY) perovskite of the form SrCe_0.95Yb_0.05O_3−α. The reaction was studied at 350–700 °C and atmospheric total pressure. The proton transference number (PTN) was calculated by simultaneous measurement of the imposed current and the proton flux and it was found to vary between 0.5 and 0.7. The effects of imposed current, temperature and inlet gas composition on the reaction rate and the PTN, were examined. Although the faradaic efficiency (Λ) remained near unity in all experiments, reaction rate enhancements (ρ) as high as 57 were achieved. An up to 90% decrease in the activation energy of the reaction was observed when protons were electrochemically “pumped” away from the catalyst.