Selective area epitaxy of CdTe

We have performed selective area epitaxy (SAE) of CdTe layers grown by molecular beam epitaxy using a shadow mask technique. This technique was chosen over other SAE techniques due to its simplicity and its compatibility with multiple SAE patterning steps. Features as small as 50 microns × 50 microns were obtained with sharp, abrupt side walls and flat mesa tops. Separations between mesas as small as 20 microns were also obtained. Shadowing effects due to the finite thickness of the mask were reduced by placing the CdTe source in a near normal incidence position. Intimate contact between the mask and the substrate was essential in order to achieve good pattern definition.     

微型电磁继电器的制作和仿真分析

介绍了一种基于MEMS技术的微型电磁继电器的制作过程和仿真分析.这种微继电器的大小约是4mm×4mm×0.5mm,主要采用普通的微加工技术来完成全部制作工艺.与传统继电器相比,这种继电器采用平面线圈来代替螺线管线圈,有利于MEMS工艺,并且提出了一种双支撑的悬臂梁结构做为活动电极,具有较高的灵敏性和稳定性.另外,还进行了一些有关线圈通过激励电流后对活动电极产生电磁力的理论计算和仿真分析,利用这些结果可以对这种电磁继电器的结构和参数进一步优化.     

Application of Galerkin Method to Dynamical Behavior of Viscoelastic Timoshenko Beam with Finite Deformation

The motion equations governing the dynamical behavior of a viscoelasticTimoshenko beam with finite deformation are derived and simplified byGalerkin method. The viscoelastic material is assumed to obey thethree-dimensional fractional derivative constitutive relation. Thedynamical behaviors of the simplified systems with order 1 and order 2are numerically computed and compared by using the computational methodpresented by the authors. The dynamical behaviors of the systems areuniform qualitatively, but there is a little deviation quantitatively.And the truncated system with order 1 is safer than the one of order 2.It is also shown that the lower order system is reasonable. Theinfluences of the load parameter and the fractional derivative parameter(material parameter) on the deflection of the beam are consideredrespectively. The numerical methods in nonlinear dynamics, such as phasediagram, and Poincaré section, are applied to reveal dynamical behaviorsof the nonlinear viscoelastic Timoshenko beam. There are plenty ofdynamical behaviors, such as periodicity, bifurcation, quasi-periodicityand chaos in the dynamical system.     

Suitable test structures for submicron ion beam analysis

For the precise determination of the sizes of submicron beam spots test structures with an excellent edge definition are required. For this purpose a semiconductor heterostructure consisting of an 1.62 μm GaInP epi-layer grown on (0 0 1) GaAs has been made, which provides atomically sharp edges for beam spot size measurements. Since the sample has been thinned down by standard transmission electron microscope (TEM) preparation techniques, it can be used for both PIXE and STIM. The sample has been investigated with a TEM and the ion nanoprobe LIPSION. A one-dimensional beam profile in the low current mode was determined by a STIM measurement using 2 MeV protons and yielded a FWHM of (41±4) nm, which is the smallest value reported so far for high energy nuclear micro- and nanoprobes. Furthermore we present nickel nanowhiskers produced at the GSI Darmstadt by electrochemical preparation of etched ion track membranes that have been used to obtain two-dimensional images of the shapes of submicron beam spots. For these measurements a scan over a single nickel nanowhisker having a diameter of 220 nm and a height of about 6 μm was performed.     

Accurate Cross Sections for Microanalysis

To calculate the intensity of x-ray emission in electron beam microanalysis requires a knowledge of the energy distribution of the electrons in the solid, the energy variation of the ionization cross section of the relevant subshell, the fraction of ionizations events producing x rays of interest and the absorption coefficient of the x rays on the path to the detector. The theoretical predictions and experimental data available for ionization cross sections are limited mainly to K shells of a few elements. Results of systematic plane wave Born approximation calculations with exchange for K, L, and M shell ionization cross sections over the range of electron energies used in microanalysis are presented. Comparisons are made with experimental measurement for selected K shells and it is shown that the plane wave theory is not appropriate for overvoltages less than 2.5 V.     

特大型地下厂房岩壁梁锚杆和混凝土施工技术及质量控制

岩壁梁是一种新型结构，为通过一定深度的锚杆将钢筋混凝土梁固定在地下厂房两侧的岩壁上，而吊车荷载则通过锚杆和钢筋混凝土与岩石接触面的摩擦力传到岩体上，形成岩壁梁和岩体共同受力的结构。岩壁梁是地下厂房施工和运行的核心建筑物，岩壁梁锚杆和混凝土的施工质量是直接关系到岩壁梁成败的关键，所以施工技术和施工质量均要求极高，是地下厂房系统施工的重点和难点。本文介绍了瀑布沟水电站地下厂房岩壁梁锚杆和混凝土施工的关键技术及质量控制经验，可供同类工程借鉴参考。     

大型箱梁翼缘开洞有限元分析

应用有限元法分析了大型双腹箱形开洞梁，以孔洞宽度和位置为变量，探讨孔洞对梁的应力、应变及跨中挠度的影响规律．研究结果表明，随着洞位置向跨中移动，以及洞宽度的增大，跨中挠度增大较快．当孔洞与支座的距离大于0．3倍跨度时，跨中最大正应力会突然减小，但小于0．3倍跨度时，开洞对跨中最大正应力影响不大．随着孔洞断面宽度的增大，开洞断面下翼缘正应力逐渐增大，与材料力学计算结果差异越来越大，但该断面的剪应力却与材料力学计算值较为接近．最后，比较有限元计算值与材料力学计算值，得出修正系数供设计参考．     

某跨线桥施工支架方案设计

结合某大桥的概况,根据梁体施工工艺要求、现场实地勘察情况确定跨线施工方案,支架采用布架灵活、搭拆方便、承载力大的WDJ碗扣式多功能钢支架,部分预应力现浇连续箱梁采用支墩加纵梁预留门洞的支架现浇,取得良好效果。     

机载雷达成像中的两种改进多普勒质心估计算法

多普勒质心估计是机载脉冲多普勒雷达DBS成像技术中最为关键的步骤之一.本文针对载机惯导参数误差较大的实际情况,提出了改进的频域和时域多普勒质心估计算法.新的算法克服了传统算法受地面场景非均匀性和回波信号起伏的影响,大大提高了估计的精度.最后将这些算法用于某型脉冲多普勒雷达的实测数据,成像结果证明了算法的有效性.     

拉盖尔-高斯光束通过有硬边光阑光学系统的传输

采用将硬边光阑展为有限个复高斯函数之和的方法,得到了拉盖尔-高斯光束通过有硬边光阑近轴ABCD光学系统中传输的近似解析公式,作了数值计算以说明传输公式的应用,并对使用该式的误差作了讨论。