关于缩短大电流开关二极管反向恢复时间的研究

通过长期的工作实践，阐述了适当条件下的金扩散对缩短反向恢复时间，提高二极管2CK28开关速度，满足了反向恢复时间，改善了二极管的反向特性。     

利用电阻场板提高SOI-LIGBT的性能

通过在SOI-LIGBT中引入电阻场板和一个p-MOSFET结构,IGBT的性能得以大幅提高.p-MOSFET的栅信号由电阻场板分压得到.在IGBT关断过程中,p-MOSFET将被开启,作为阳极短路结构起作用,从而使漂移区的过剩载流子迅速消失,IGBT快速关断.而且由于电场受到电阻场板的影响,使得过剩载流子能沿着一个更宽的通道流过漂移区,几乎消去了普通SOI-LIGBT由于衬偏造成的关断的第二阶段.这两个因素使得新结构的关断时间大大减少.在IGBT的开启状态,由于p-MOSFET不导通,因此器件的开启特性几乎与普通器件一致.模拟结果表明,新结构至少能增加25%的耐压,减少65%的关断时间.     

一种升压式PFM DC-DC转换器的设计

讨论了一种PFM升压式DC－DC电压转称器的设计，重点对其关键的基准电压产生，振荡控制信号产生及比较器设计进行了分析，并采用3μmCOMOS工艺完成芯片的设计。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

Thermodynamic analysis of solar photovoltaic cell systems

The thermodynamic characteristics of solar photovoltaic (PV) cells are investigated from a perspective based on exergy. A new efficiency is developed that is useful in studying PV performance and possible improvements. Exergy analysis is applied to a PV system and its components, and exergy flows, losses and efficiencies are evaluated. Energy efficiency is seen to vary between 7% and 12% during the day. In contrast, exergy efficiencies, which incorporate the second law of thermodynamics and account for solar irradiation exergy values, are lower for electricity generation using the considered PV system, ranging from 2% to 8%. Values of “fill factors” are determined for the system and observed to be similar to values of exergy efficiency.     

船艇电站仿真与综合管理系统

论文介绍了船艇电站模拟器的组成和实时仿真功能,着重描述了多层次的图形管理系统及其仿真界面。课题将多媒体课件制作与模拟器有机地结合,涵盖了船舶主要电气设备的控制电路,既利于实践训练又便于原理的讲解,并在实践中取得了良好的效果。     

小型全内腔脉冲Ar~＋激光管的研制

介绍一种小型全内腔脉冲Ａｒ＋激光管的设计和结构。并对不同阴极，放电管直径，激励电压及Ａｒ气压等对输出功率及激光管寿命的影响作了一系列的实验，试制出结构简单，使用方便，价格便宜的有一定实用价值的小型全内脏脉冲Ａｒ＋激光管。     

掺杂对低压ZnO压敏陶瓷材料显微结构及性能的影响

本文探讨了多种金属氧化物对ＺｎＯ－Ｂｉ＿２Ｏ＿３－ＴｉＯ＿２系材料的改性作用和对其微结构的影响，为得到预定性能的材料提供了掺杂方面的实验依据。     

多功能保护与告警自动调压装置

本文叙述了作者设计并制作的具有多种告警和保护功能的３８０Ｖ交流自动调压器的控制装置。它可使调压精度提高到工作电压的士１％以内，并在自动调压器输出电压过高或过低时、或出现故障时进行告警。当出现故障或误动作时自动切断调压电动机的电源。     

基于DSP的空间电压矢量控制的变频系统设计

介绍了电压空间矢量技术的基本原理和数字信号处理器TMS320F240的基本结构，并讨论了基于TMS320F240的变频调速系统的软硬件设计，提出了一般性的结论。