碾压混凝土抗裂性能的几个影响因素研究

影响碾压混凝土抗裂性能的因素很多，本文主要从水泥矿物成分、石粉含量、掺和料（氧化镁等）、骨料特性（弹性模量）及砂率等方面影响因素开展试验研究，分析各因素对碾压混凝土抗裂性能的影响效果。试验结果表明，砂率和石粉含量均存在碾压混凝土抗裂能力最大的最优含量；掺入适量的氧化镁掺和料和合理增加水泥熟料中的C，S和C4AF两种矿物成分含量，对提高碾压混凝土的抗裂能力非常有利；骨料的弹性模量是影响混凝土弹性模量的重要因素，使用低弹性模量骨料可以大大降低混凝土的弹性模量，增大极限拉伸值，提高混凝土的抗裂能力。     

Measurement of the Timoshenko Shear Stiffness. II: Effect of Transverse Compressibility

This is the second of two papers devoted to the issue of measuring the Timoshenko shear stiffness of thin-walled composite beams. In the first paper, the effect of warping on the effective Timoshenko shear stiffness, as measured through bending tests, was studied. The bending test was simulated using finite-element analysis, and the results indicated that the warping effect was minimal. On the other hand, the evidence suggests that transverse flexibility may have a significant influence on the effective Timoshenko shear stiffness, decreasing the effective shear stiffness at shorter test spans. The purpose of the present study is to further investigate this effect and to explore the use of a sandwich theory to predict the measurement error. A higher-order sandwich theory, which captures the transverse strain at concentrated loads and supports, is applied to a commercially available thin-walled composite beam. The results indicate that the sandwich model does capture the decrease in the effective shear stiffness at short spans, and the dependence of the shear stiffness on span-to-depth ratio is similar to that calculated in the first paper, using the finite-element method.     

Defining Yield from Bender Element Measurements in Triaxial Stress Probe Experiments

This paper describes the elastic response of a block sample of compressible Chicago glacial clay under a variety of stresses and its relationship with the deformation characteristics at relatively large strains. The elastic shear stiffness was obtained from bender element tests during consolidation and shearing in drained triaxial stress probe tests. An empirical correlation was established based on the elastic shear stiffness in a preyield condition. By comparing the empirical correlation with the measured elastic shear stiffness in the stress region during probing, the changes of elastic shear stiffness were investigated. The departure of elastic shear stiffness from values computed by the empirical relation based on K0 loading directly relates to the yielding characteristics of the clay. The large-scale change of soil structure at yielding alters the well-established relationship between the elastic shear stiffness and stresses in the preyield condition. The mechanical yielding response of clays can be detected based on the systematic analysis of the elastic shear wave velocities.     

压电量测系统漏电影响分析

本文通过对压电量测系统等效电路图的逐步简化,得出矩形脉冲信号的漏电方程;并对系统在各种情况下的时间常数,漏电相对误差进行了计算,最后就系统在校准和现场测试中经常碰到的几种情况,进行了定量估算,从而解决了压电量测系统在使用中的一些具体问题。     

矩形介质波导阵列的一种新型分析方法

本文将等效介电常数近似分析方法在应用范围和处理方法上进行了一些改进．发展为双等效介电常数近似分析法，然后用它来分析矩形介质波导阵列．推得两个一维周期的耦合特征方程。如果将Macatili方法应用范围扩展用来研究该波导阵列也会得到同样的结果，它们都能在二维平面上较准确地反应出通带和阻带等主要周期特性。     

Nanoindentation mapping of mechanical properties of cement paste and natural rocks

This paper reports a study to assess nanoindentation mapping of mechanical properties of cement paste and natural rocks. Initial work seems to show that mechanical property mapping by nanoindentation is feasible and can be related to microscopic information. Further work is however required on the effect of indent size and spacing. Such a testing technique can be very useful for materials with different phases to study the intrinsic properties of each component, and also the interaction and properties of the interfacial regions of different phases. The values of Young's modulus and hardness of the individual mineral phases were also determined by statistically analysing a large number of experimental data.     

Flow Control Through the Use of Topography

In this work, optimal shaft shapes for flow in the annular space between a rotating shaft with axially-periodic radius and a fixed coaxial outer circular cylinder, are investigated. Axisymmetric steady flows in this geometry are determined by solving the full Navier-Stokes equations in the actual domain. A measure of the flow field, a weighted convex combination of the volume averaged square of the L₂-norm of the velocity and vorticity vectors, is employed. It has been demonstrated that boundary shape can be used to influence the characteristics of the flow field, such as its velocity component distribution, kinetic energy, or even vorticity. This ability to influence flow fields through boundary shape may be employed to improve microfluidic mixing or, possibly, to minimize shear in biological applications.     

Thermally stimulated discharge current (TSDC) and dielectric constant of semiconducting glasses

In this paper the results of thermally stimulated discharge current (TSDC) and dielectric constant for 40PbO-60Bi₂O₃ glass thermoelectrets are presented. Measurements of TSDC and dielectric constant, ǵe, have been carried out in the temperature range 30–300°C. The thermoelectrets were prepared at different polarizing fields. The various observed peaks in the thermograms are discussed on the basis of space charge polarization. The trap energy is evaluated from the Garlick-Gibson plot of initial rise method. Similarly other parameters such as relaxation time, charge release etc are evaluated.     

Hydrolysis of Fe(OH)SO4 in the presence of metallic iron

Hydrolysis of Fe(OH)SO₄ was carried out in the presence of metallic iron in order to prevent the formation of iron(III) oxides with strongly bonded sulphate. Under the conditions of the experiment, the products were found to be mixtures of ?-Fe₂O₃ and α-FeOOH. The occluded sulphate, if any, could be easily washed out with water. The hydrolysis reaction passes through an equilibrium state before coming to completion. The entropy with enthalpy of the hydrolysis corresponding to the equilibrium state were found to be 4 e.u. and 0·5 kJ/mol, respectively. The activation energy of the hydrolysis reaction was found to be 21 kJ/mol.     

复杂不规则刚体转动惯量的测试原理和方法

为了测量复杂不规则刚体转动惯量，采用时间常数法，通过A/D卡PS2129的定时/计数器8253高精度测速、计时，能较好地应用于测量转动惯量。