基于CFD分析的轴流式螺旋叶轮设计

针对一种井下马达的轴流式螺旋叶轮进行了理论计算，并利用CFD方法对其进行了紊流数值模拟。根据CFD分析结果对理论计算的结果进行了修正，并通过比较同一工况下不同螺旋角叶片的水力效率，得出了在满足设计要求条件下的最优螺旋角。通过试验，验证了CFD分析在计算和优化设计此种轴流式螺旋叶轮的有效性，并具有指导意义。     

江汉平原印支期以来的盆山耦合关系及下古生界油气响应

利用构造地质学和油气系统理论，以盆地构造-沉积分析技术为手段，研究了印支期以来江汉平原与周缘造山带的耦合关系，探讨了江汉平原的构造演化及其对油气成藏的控制作用。印支期以来江汉平原及周缘经历了挤压、拉张、挤压3次大的构造应力场的转换，使古生代海相碳酸盐岩沉积为主的盆地具有改造盆地的特点；一方面强烈的抬升、剥蚀使早期聚集的油气经历改造和再分配、再聚集过程，另一方面燕山期构造活动使逆冲推覆构造成为该区重要勘探领域。综合分析表明，位于台、盆转换带的宜昌-珂理-簰州区带是目前江汉平原及周缘下古生界油气勘探的有利地区。     

房间空调器高效节能技术分析

本文主要介绍了高效节能型空调器的优化设计，包括选用高效压缩机、增大换热面积，增大风量、管路的合理设计，旨在提高制冷量，降低功耗，提高能效比。     

Industrial energy efficiency: the need for investment decision support from a manager perspective

Global competition, commitment to the Kyoto Protocol and a deregulated, integrated European electricity market will in all probability increase the demand for energy efficiency on the part of companies in Sweden. Investment decisions are an important part of meeting the new demands, because they decide the future efficiency of industrial energy systems. The objective of this study is to investigate, from a managerial perspective, the need to improve decision support in some industries, which can help to facilitate and improve investment decisions concerning energy efficiency. This work has been conducted through in-depth interviews with representatives for a number of energy-intensive companies and non-energy-intensive companies from different sectors. One need that was identified was the improvement of working methods in order to support the decision-making process. Here, external players seem to be playing an increasingly important role. Access to correct information, better follow-up activities, and transparent, understandable calculations are also considered to be important. The study will form the foundation for subsequent work on decision support and energy efficiency in industry.     

一种协调的科技文献分类方法

科技文献之间的相互引证关系反映了一种科学交流活动,显示了科学文献之间(甚至是学科之间)的内在联系,而通过追溯文献之间的这种关系,可以改善和提高传统的基于内容的科技文献的分类的方法。论文利用有相互引证关系,有同引关系,以及有耦合关系的两篇文献一般是属于同一类的这一特点,提出了文献之间的引用相似度,同引相似度,耦合相似度这三个概念,再利用这三个概念生成了文献之间的“结构相似度”,并将它用于K-NN分类法中得出一种基于结构的分类法。最后,论文将这种基于结构的分类法和基于内容的NaveBayes分类法结合起来提出了一种新的协调分类法。     

Numerical simulations of cantilever beam response with saturation control and full modal coupling

Numerical simulations of the response of a uniform, cantilever beam subjected to a base excitation are performed. A saturation absorber is implemented to control the beam response. In previous investigations of similar configurations, the inertial and structural properties of the piezoelectric actuators have been neglected, resulting in an analytical model of a uniform beam. This investigation includes the nonuniformities in the beam properties that are introduced when piezoelectric actuators are bonded to the uniform beam. The resulting coupling between uniform, cantilever beam modes is fully included in the analytical model. It is shown that this modal coupling has a significant effect on the beam response, which is not present when modal coupling is neglected.     

CHA无机凝胶体系的研究及应用

过去低渗油藏调剖，注入性和堵塞性很难统一，新研制的CHA无机凝胶体系是一种易注入、堵塞能力强的调剖剂，而且成胶时间在一定范围内可控。研究了配比、温度对CHA无机凝胶体系成胶时间的影响，成胶前的注入性，成胶后在高温高盐条件下的堵塞能力，得到了可应用于现场的CHA无机凝胶体系。该调剖剂在濮城油田沙三段和文卫结合部等高温、高盐低渗油藏应用后，取得了很好的效果。     

Influence of additives on electrodeposition of bright Zn-Ni alloy on mild steel from acid sulphate bath

The influence of a condensation product (CP) of veratraldehyde (VRTD) and p-amino benzoic acid (PABA) on Zn-Ni alloy electrodeposited onto mild steel was studied in acidic sulphate solutions. Ethylenediaminetetraaceticacid (EDTA) and cetyltrimethylammoniumbromide (CTAB) were used as complexing and wetting agents, respectively. The effect of bath constituents, pH, current density and temperature on nature of deposit were studied through Hull cell experiments. The bath constituents and operating parameters were optimized. Deposit properties and corrosion resistance were discussed. Throwing power, current efficiency and polarization studies were carried out. SEM photomicrographs of the deposit obtained from optimum bath revealed fine-grained deposit of the alloy in the presence of condensation product and hence modified the morphology of zinc-nickel alloy deposit. IR spectrum of the scrapped deposit showed inclusion of addition agent.     

晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

非接触式叶片振测系统的叶尖定时传感器的研究

介绍了一种新型的叶尖定时传感器 ,传感器采用Y型耦合光纤与自聚焦透镜相结合 ,实现聚光照明及叶尖散射光的高效收集 ,大大提高了检测灵敏度。光源采用 4 5mW的半导体激光器 ,光电接收元件采用雪崩式光电二极管。传感器具有体积小、结构简单、成本低、安装和调节方便、测量精度高等优点。实验表明 ,该传感器对信号有良好的接收能力 ,满足涡轮机叶片高速、实时检测的要求 ,能为后续处理电路提供稳定而可靠的信号