准噶尔盆地侏罗系储集层的基本特征及其主控因素分析

从描述储集层基本特征、分析储集层性质的主控因素、建立储集层成因模式和评价、预测储集层性质这 4个层次 ,研究准噶尔盆地重点勘探目标区的侏罗系储集层。系统总结侏罗系储集层岩石学特征 ,认为成岩压实作用强弱是控制储集层性质的关键因素 ;指出相对优质储集层均为剩余原生粒间孔隙型储集层 ,溶蚀作用对渗透率贡献小 ;非煤系储集层的孔隙保存条件明显比煤系储集层好 ,这是三工河组、头屯河组和吐谷鲁群的物性普遍优于八道湾组和西山窑组的原因。在确定储集层性质的控制因素和控制机理基础上 ,建立了煤系和非煤系两大类储集层的成因 演化模型。在上述研究的基础上 ,分地区、分层位评价了储集层 ,并预测了不同渗透率储集层的深度界线及相对优质储集层的平面分布。图 6参 10     

直线式电机在有杆抽油设备中的应用

通过对游梁式抽油机的效率、启动特性与直线式电机驱动的有杆抽油机特性的对比，论述了直线抽油机的优越性及应用前景。     

膨化硝酸铵晶体特性研究

膨化硝酸铵是一种改性硝酸铵晶体,具有显著自敏化特征,成功应用于各类膨化硝铵炸药及震源药柱中.在膨化剂(表面活性剂)的作用下改善了膨化硝酸铵的物理性能和晶体结构及其特征.本文通过硝酸铵固体表面接触角的测量,算出了膨化硝酸晶体表面能;利用差热分析(DSC)技术给出了膨化剂对硝酸铵晶变的影响;采用x射线衍射分析了膨化硝酸铵晶体的晶格特性.     

瞬态瑞雷面波法在软岩地层勘探中的应用

结合工程实例，介绍了在物性条件和地质条件复杂地区利用面波勘探技术解决软岩地区第四系覆盖层及其岩埋深的勘探方法。     

一种联合信源信道匹配的视频传输方法

介绍了一种实现联合信源-信道编码的通用的新方法—联合信源-信道匹配。该方法思想巧妙,通过将有限的通信系统资源在信源和信道编码器之间进行巧妙合理的分配,从而获得最优的系统整体传输性能。并且,该方法并不仅局限于特定的信源-信道编码器对,可适用于任何一种信源-信道编码器对共享有限系统资源的情况,具有很好的通用性。仿真实验证明了JSCM通用视频传输系统能获得比传统的固定码率分配系统更高的整体性能增益。     

大长径比自旋弹箭横向自振特性的有限元计算方法与结果分析

本文研究大长径比自旋弹箭在飞行时横向振动的自振特性。本文将转子动力学应用于弹道学 ,采用有限元法 ,建立自旋弹箭横向振动自振特性方程。同时给出了计算方法。利用该方程和该方法 ,开发了相应的计算程序。通过数值计算 ,可给出细长旋转弹箭飞行时的进动转速和临界转速 ,以及相应的位移和角度振型。利用该程序 ,进行了实例计算和分析。     

地下水污染试验研究进展

本文在总结国内外众多学者有关污染物在含水层中的运移规律研究成果的基础上，介绍了地下水污染试验研究的最新进展；并据此认为，三维弥散，各向异性含水层介质中污染物的迁移，非饱和土层中的污染物多相迁移和吸力的关系等将成为今后地下水污染传播研究的主要问题。     

Influence of nano-scaled dispersed second phase on substructure of deformed dispersion strengthened copper alloy

The deformation behavior of dispersion strengthened copper alloy Cu-Al2O3 was studied by TEM. The results show that nano-scaled dispersed second phase not only increases dislocation density in matrix, but also has an important influence on the dislocation substructure. The presence of fine dispersed Al2 O3 particles results in a uniform and random dislocation distribution in matrix copper and causes the difficulty in formation of dislocation cell structure and the decrease in the amount of cell structure during deformation. Deformation gives rise to much more dislocations and dislocation cells form more difficultly and the decrease in the cell size with the increase of dispersion degree.     

Effect of ionic content,solid content,degree of neutralization,and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

There are many variables in the preparation of aqueous polyurethane (PU) dispersions. Carboxylic acid content, solid content, degree of pre/postneutralization of the carboxylic acids, and chain extension all impact dispersion particle size, viscosity, pH, molecular weights, and glass transition temperature. This study evaluated the impact of these variables on a given PU dispersion formulation prepared from isophorone diisocyanate, an aliphatic polyester polyol, dimethylol propionic acid, and hexamethylene diamine with triethyl amine as the neutralizing base and N‐methyl pyrrolidone as the cosolvent. Changes in carboxylic acid content, degree of preneutralization, and chain extension were found to have the expected impacts on dispersions properties. Increased ionic content in the dispersion step led to lower particle size and higher viscosity, increased chain extension with its concurrent increase in molecular improved subsequent film properties. Surprising results were obtained by varying the amount of postneutralization and from increased solids content at the time of dispersion. Unexpectedly, both of these variations led to much higher dispersion viscosities and particle size in solution. To have these changes take place, it is theorized that there is a major change in solution morphology caused by these modifications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2514–2520, 2005     

Formation of composites fabricated by exothermic dispersion reaction in A1-TiO2-B2O3 system

The formation of aluminum matrix composites fabricated by exothermic dispersion reaction in A1-TiO2-B2O3 system was investigated. The thermal analysis results show that the reactions are spontaneous and exothermic. The Gibbs free energy of α-Al2O3 is the lowest among all the combustion products, followed by TiB2 and Al3Ti. It is noted that when the B2O3/TiO2 mole ratio is below 1, the reaction products are composed of particle-like α-Al2O3, TiB2 and rod-like Al3Ti. The α-Al2O3 crystallites, resulting from the reaction between A1 and TiO2 or B2O3, are segregated at the grain boundaries due to a lower wettability with the matrix. SEM micrographs show that rod-like Al3Ti phase distributes uniformly in the matrix. When the BEO3/TiO2 mole ratio is around 1, the Al3Ti phase almost disappears in the composites, and the distribution of α-Al2O3 particulates is improved evidently.