除尘改造设计中风量平衡分析

详细说明除尘设计改造中风量的压力损失计算，风量平衡过程及通风管道直径和走向的确定。     

大规模电力系统不对称短路的分块射影解法

本文把网络的分块射影法用于大规模电力系统不对称短路的分析计算。研究表明：该方法对短路计算是可行的。一旦求出了射影张量，即可重复用于后续的计算，只需改变故障所在的那一个子网络的射影张量。本文提出的网络分块射影算法为大规模电力系统的分析计算提供了一条崭新的途径。     

李子溪流域水土流失及泥沙输移规律初步研究

为了探讨长江上游流域水土流失及泥沙输移规律，选取嘉陵江中游的支流李子溪为典型流域进行分析研究，在实地调查，野外测验及应用１９６０年－１９９１年实测降雨、径流、输沙资料的基础上，利用单因子相关分析和多因子回归分析，分别建立了输水利沙量、最大输沙率计算方程。在此基础上，参照径流瞬时单位线原理，以线性时不变系统为基础，建立输沙瞬时单位线模型。通过输沙单位线与时段净侵蚀量的卷积得到流域出口断面的输沙率过程     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

专用超大规模集成电路在LED显示系统中的应用

自1976年蒙特利尔奥运会采用了第一块黑白视频显示屏以来，各种大屏幕特别是LED显示屏得到了迅猛发展，在现代信息社会中更是随处可见。在这些显示系统中，应用了大量的不同种类的集成电路作为驱动芯片。本文叙述了运用于LED显示系统中的超大规模集成电路的强大功能。     

Cooperative Effect Radiation Loss of Optical Pump Solid Laser

1 Introduction For increasing the output energy of laser, the pumping power must be enhanced. But the cooperative effect will arise and cause spontaneous radiation light in laser medium sample when the pumping power is high e- nough without the resonator. The spontaneous radiation light is coherent light between laser and fluorescent. It will compete the upper energy level population with ex- cited radiation, and the loss increase. In solid laser medium, such as Nd∶YAG, the Nd ion densityi…     

On the relationships among latent variables and residuals in PLS path modeling: The formative-reflective scheme

A new approach for the estimation and the validation of a structural equation model with a formative-reflective scheme is presented. The basis of the paper is a proposal for overcoming a potential deficiency of PLS path modeling. In the PLS approach the reflective scheme assumed for the endogenous latent variables (LVs) is inverted; moreover, the model errors are not explicitly taken into account for the estimation of the endogenous LVs. The proposed approach utilizes all the relevant information in the formative manifest variables (MVs) providing solutions which respect the causal structure of the model. The estimation procedure is based on the optimization of the redundancy criterion. The new approach, entitled redundancy analysis approach to path modeling (RA-PM) is compared with both traditional PLS Path Modeling and LISREL methodology, on the basis of real and simulated data.     

水力自动翻板闸门的瞬心轨迹及其对稳定性的影响

分析了连杆滚轮式水力自动翻板闸门的运动轨迹，并由此得出闸门动、静坐标系间的转换关系．结合翻板闸门的运转机理，探讨了闸门在运行过程中的瞬心轨迹线及其对闸门稳定性的影响．结果表明，通过优化闸门结构可调整“瞬心”的位置，保证闸门运转的稳定性．     

用于微波/射频集成电路的一种新型低损耗介质——多孔硅及氧化多孔硅厚膜

提出在单片微波集成电路(MMIC)中用多孔硅/氧化多孔硅厚膜作微波无源器件的低损耗介质膜.研究了厚度为70μm的多孔硅/氧化多孔硅厚膜在低阻硅衬底上的形成,这层厚膜增加了衬底的电阻率,减少了微波的有效介质损耗.通过测量在低阻硅衬底上形成的氧化多孔硅厚膜上的共平面波导的微波特性,证明了在低阻硅衬底上用厚膜氧化多孔硅可以提高共平面传输线(CPW)的微波特性.     

可膨胀波纹管技术在韦15-19井的应用

可膨胀管包括可膨胀实体管和可膨胀波纹管，主要用于在不减小井眼尺寸的情况下封堵各种复杂地层，对损坏套管进行补贴修复，作为各种井筒封隔器以及延长技术套管长度。实体管和波纹管两者膨胀机理不一样，相比之下，可膨胀波纹管技术具有膨胀工艺简单，作业周期短的优点，该技术一直由俄罗斯掌握。中国石化勘探开发研究院经过多年的潜心研究，终于形成了具有自主知识产权的可膨胀波纹管产品及其配套的工艺技术，新研制的可膨胀波纹管壁厚8mm，抗内压强度35MPa，抗外挤强度10MPa，并在江苏油田韦15—19井进行了漏层封堵现场试验，经过扩眼、管串下入、水力膨胀、机械膨胀等工艺后获得圆满成功，标志着我国已经打破了国外公司对该技术的垄断，填补了国内在该领域的技术空白。